Manufacturers
EAGLE-PICHER LTC-7PN
Specifications
Capacity
750 mAh
Chemical System
Lithium-Thionyl Chloride
Dimensions
1"L×0.65"W×0.26"H
Material, Jacket
Noryl
Primary Type
Primary (Non-Rechargeable)
Size
Rectangular
Temperature, Operating
-40 to +95 °C
Temperature, Operating, Maximum
+95 °C
Temperature, Operating, Minimum
-40 °C
Terminal Type
Solder Tinned
Termination
Thru-Hole
Voltage, Battery
3.5 V
Voltage, Rating
3.5 V
Volume
0.1625 cu.in.
Weight
6.8 Grams
Features
- High energy density compared to other chemistri
- Lithium Battery, 0.1625 Cu.in. Volume, Solder Tinned Terminal Type
- Low profile, prismatic design
- Stainless steel construction provides corrosion resistance, hermetic seal and structural integrity
- Wave solderable (limit solder bath exposure to a maximum of 5 seconds)
Datasheet
Extracted Text
LTC-7PN KEEPER II NON-RECHARGEABLE - LITHIUM / THIONYL CHLORIDE Product Name Prismatic Battery APPLICATIONS Airports; Emergency; Industrial; Inventory Management; Measuring/Monitoring; Medical; Navigation; Specialized Products PERFORMANCE SPECIFICATIONS Voltage (Volts) 3.5 Capacity (MilliAmp-Hours) 750 Temperature:Low (Farenheit) -67 Temperature:High (Farenheit) 185 DIMENSIONS AND WEIGHT Width/Diameter (Inches) 0.65 Length/Depth (Inches) 1 Weight (grams) 6.8 Height/Thickness (Inches) 0.26 CELL SIZE Cell Size/Type Prismatic Cells PRODUCT NOTES UL recognized, no charging circuits required, non-pressurized system © 2004 EP Commercial Power Solutions, all rights reserved. Terms & Conditions ® Keeper LTC-7PN The LTC-7PN series was design specifically to be printed circuit board (PCB) compatible. With a low profile, prismatic shape, this battery is unique in the industry and a perfect match for space saving requirements. Available in 3 PCB and 1 surface mounting configurations, these cells provide high quality, high energy density, non-position sensitive solutions to your high density electronics power needs. LTC-7PN PRODUCT FEATURES • Compliant with lead-free RoHS and WEEE TYPICAL LTC-7PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES EC directives. 3.9 3.8 • Low profile, prismatic design. 3.7 3.6 3.5 • Stainless steel construction provides corrosion 3.4 3.3 resistance, hermetic seal and structural integrity. 3.2 3.1 3.0 • Years of low rate continuous use. 2.9 1 mA 10 uA 2.8 2.7 • Stand-by use with 80% capacity retention after 2.6 2.5 15 years at room temperature. 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 x 10 x 100 x 1,000 x 10,000 DISCHARGE TIME (HOURS) • Highly efficient utilization of valuable board space. HIGH TEMPERATURE OPERATION AT 75°C TEMPERATURE OPERATION AT 20°C • Wave solderable (limit solder bath exposure to COLD TEMPERATURE OPERATION AT -20°C a maximum of 5 seconds). • High energy density compared to other chemistries. • No charging circuits required. • Higher cell voltage allows for fewer cells and high reliability. • Flat discharge characteristics provide optimum voltage regulation. • Non-pressurized system allow for high temperature usage. • Ship unrestricted. IATA No. UN3090. • Underwriters Laboratories recognized component. LITHIUM-THIONYL CHLORIDE BATTERIES ® Keeper LTC-7PN Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-7PN 3.5 750 1.00 0.65 0.26 6.8 LTC-7PN-S2 3.5 750 1.00 0.65 0.26 6.8 LTC-7PN-S4 3.5 750 0.65 0.26 1.00 6.8 LTC-7PN-SM-S4 3.5 750 1.00 0.70 0.26 6.8 SPECIFICATIONS LTC-7PN SPECIFICATIONS LTC-7PN-S4 Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts Nominal Working Voltage, 25°C .......................................... 3.5 volts Nominal Working Voltage, 25°C .......................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .............................. 750 mAH Nominal Capacity (350 hr. rate), 25°C .............................. 750 mAH Volume .............. .1625 cu. in. Volume .............. .1625 cu. in. POWER .650 0.30 0.175 LEADS Weight ...................... 6.8 GMS Weight ...................... 6.8 GMS .30 .17 Operating Temperature ............ Operating Temperature ............ + .200 ............-40°C to +95°C ............-40°C to +95°C .48 Case Material: Case Material: 1.10 1.00 304 Stainless Steel, 304 Stainless Steel, + Hermetically Sealed Hermetically Sealed .050 (case negative polarity) (case negative polarity) 0.40 0.175 1.00 Terminal and Support Pins are 0.260 Terminal and Support Pins are 0.650 0.30 .030" dia. (solder tinned) .030" dia. (solder tinned) .260 SPECIFICATIONS LTC-7PN-S2 POWER LEADS Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts 0.30 0.30 0.175 Nominal Working Voltage, 25°C .......................................... 3.5 volts –.02 Nominal Capacity (350 hr. rate), 25°C................................750 mAH + Volume.......................................................................... .1625 cu. in. 1.085 Weight ................................................................................ 6.8 GMS 1.00 –.02 The specifications on this sheet may Operating Temperature ............................................ -40°C to +95°C be changed by EaglePicher without Case Material: 304 Stainless Steel, Hermetically Sealed notice. (case positive polarity) EaglePicher™ is a trademark of and 0.650 0.260 Keeper® is a registered trademark of Terminal and Support Pins are .030" dia. (solder tinned) EaglePicher Corporation.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the LTC-7PN have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Eagle Picher LTC16M-S4 Batteries - Keeper II Lithium Batteries 3.5V 1600 mAh Prismatic Keeper
Eagle Picher LTC-16M-S4 Keeper II Lithium Battery 3.5V 1.6AH
Eagle Picher LTC-16P-CO-F-S22 Battery - Keeper II Lithium Batteries 3.5V 1600mAH BATTERY
Eagle Picher LTC-3PN Keeper II Lithium Batteries. 3.5V | 350MAH W/4LDS
Eagle Picher LTC-7P Keeper II Lithium Battery, 3.5 Volt, 750 mAh Capacity, 1.20 Length (in.), 0.70 W...
Eagle Picher LTC-7PNS4 Keeper II Lithium Battery - 3.5V 750MAH W/2LDS
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods