TM TM ® Eagle EaglePicher Picher Keeper II LTC-3PN The LTC-3PN series is a perfect match for applications which have little space but need a reliable, high energy source. This cell is available in three (3) printed circuit board (PCB) mounting configurations, with the flexibility to be designed for any mounting geometry. 2 With 350 mAh packed into 0.0975 in , these small power sources will provide the solution for your electronic packaging requirements. LTC-3PN PRODUCT FEATURES TYPICAL LTC-3PN DISCHARGE CHARACTERISTICS AT VARIED TEMPERATURES • Manufactured in the USA. 3.9 • Low profile, prismatic design. 3.8 3.7 3.6 • Stainless steel construction provides corrosion 3.5 3.4 resistance, hermetic seal and structural integrity. 3.3 3.2 3.1 • Years of low rate continuous use. 3.0 2.9 1 mA 10 uA 2.8 • Stand-by use with 80% capacity retention after 2.7 2.6 15 years at room temperature. 2.5 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 x 10 x 100 x 1,000 x 10,000 • Highly efficient utilization of valuable board space. DISCHARGE TIME (HOURS) HIGH TEMPERATURE OPERATION AT 75°C • Wave solderable (limit solder bath exposure to TEMPERATURE OPERATION AT 20°C a maximum of 5 seconds). COLD TEMPERATURE OPERATION AT -20°C • High energy density compared to other chemistries. • No charging circuits required. DO YOU HAVE QUESTIONS • Higher cell voltage allows for fewer cells and CONCERNING: high reliability. • What size battery you need? • Flat discharge characteristics provide optimum • What is passivation and its effects? voltage regulation. • What is the maximum rate of this cell? • Non-pressurized system allow for high temperature usage. • Any other technical question? • Ship unrestricted. If so, call our Engineers at (417) 659-9635 for detailed technical information. • Underwriters Laboratories recognized component. LITHIUM-THIONYL CHLORIDE BATTERIES + - TM TM ® Keeper II Eagle EaglePicher Picher LTC-3PN Part Number Voltage Capacity (mAh) Length (in.) Width (in.) Thickness (in.) Weight (g) LTC-3PN 3.5 350 0.60 0.65 0.265 4.6 LTC-3PN-S2 3.5 350 0.65 0.265 0.60 4.6 LTC-3PN-S4 3.5 350 0.60 0.265 0.65 4.6 *LTC-3PN-SM-S1 3.5 350 0.60 0.65 0.265 4.6 *Surface Mount (Reflow soldering not acceptable) .30 SPECIFICATIONS LTC-3PN POWER LEADS Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts .175 Nominal Working Voltage, 25°C .......................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .............................. 350 mAH - .70 .60 Volume.......................................................................... 0.103 cu. in. Weight ................................................................................ 4.6 GMS Operating Temperature ............................................ -40°C to +95°C .40 .30 Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) .17 .65 Terminal and Support Pins are .030" dia. (solder tinned) .265 SPECIFICATIONS LTC-3PN-S2 .30 .17 Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts Nominal Working Voltage, 25°C .......................................... 3.5 volts POWER .48 Nominal Capacity (350 hr. rate), 25°C .............................. 350 mAH LEADS Volume.......................................................................... 0.103 cu. in. + Weight ................................................................................ 4.6 GMS .60 Operating Temperature ............................................ -40°C to +95°C Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) Terminal and Support Pins are .030" dia. (solder tinned) .65 .265 SPECIFICATIONS LTC-3PN-S4 .175 Nominal Open Circuit Voltage, 25°C .................................. 3.67 volts Nominal Working Voltage, 25°C .......................................... 3.5 volts Nominal Capacity (350 hr. rate), 25°C .............................. 350 mAH POWER .70 .60 LEADS Volume.......................................................................... 0.103 cu. in. Weight ................................................................................ 4.6 GMS Operating Temperature ............................................ -40°C to +95°C .25 Case Material: 304 Stainless Steel, Hermetically Sealed (case negative polarity) .265 .65 Terminal and Support Pins are .030" dia. (solder tinned) WE CAN DESIGN TO FIT ANY APPLICATION. DISTRIBUTED LOCALLY BY: Our team of engineers can design any pin configuration required to fit your specialized application. If you don't see a battery configuration you need here, call us and we will begin working on a EPT part number just for you. TM EaglePicher Commercial Power Solutions ® Keeper II P.O. Box 47 • Joplin, MO 64802 Tel: (800) 201-0215 or (417) 659-9635 • Fax: (417) 626-2078 E-mail: inquiry.keeper@eaglepicher.com • Web site: www.eaglepicher.com