CompactPCI Fault Tolerant Chassis FTC610 • PICMG 2.0 R 3.0 • 1 Processor Slot and 7 Expansion Slots • Standard Floppy and CD-ROM Drive Carrier; Up to Four 3U 3.5” x 1” SCA SCSI Drive Carriers; Two 3.5” x 1” IDE Internal Drive Bays • Front Panel LEDs • Front Accessible 270 CFM Hot-Swap Fan Tray • 350 W AC or DC, N+1 Power Supply System • UL and FCC Certified • 14” H x 18.2” W x 14.5” D SPECIFICATIONS: CONSTRUCTION DRIVE SUPPORT • 14, 16, and 18 Gauge Steel • Supports one 1.44MB Floppy and one 5.25” Drive • Painted Exterior Surfaces (Gray or Beige Polyurethane Standard) • Internal Support of up to two hard drives • Plated Interior Surfaces • Supports up to four SCA SCSI Drives DIMENSIONS COMPACT PCI SUPPORT • Height - 14” (8U) • PICMG 2.0 R 3.0 • Width - 19” Overall • Eight Slot Card Cage • Depth - 14.5” • 2.4” (12HP) Processor Slot • Weight - 45 lbs. (typical) • Seven Useable 6U Expansion Slots • CompactPCI Computer Telephony ENVIRONMENTAL 2.5 R 1.0 Compliant o • 0 - 50 Celsius Ambient Temperature Operation - P3 and P5 Connectors Include Type AB Rear Shrouds POWER SUBSYSTEM - Inputs for Telecom Power Supply Bus • Autosensing AC or -48V DC Input • CompactPCI Hot-Swap 2.1 R 2.0 Compliant • 350W - Basic Support • N+1 Redundancy COOLING SUBSYSTEM • 270 Total CFM • Optional Rear Fans (80 CFM) • Speed Monitored Fans (Front Only) • Hot-Swap Fan Tray • Easily Serviced Air Filters • Front and bottom Intake, Top Exhaust www.dtims.com Rev. 1.5 1.800.443.2667 September 2, 2004 All trademarks and tradenames are the property of their respective owners. FTC610 CompactPCI Fault Tolerant Chassis Front Rear The FTC610 is DTI's latest industrial the rear cards are optionally available and pro- P3 and P5 connectors at each slot include long CompactPCI platform. It provides fault toler- vide 80 CFM of air. The fans are mounted in a tails and type AB rear shrouds. Inputs are also ant support for a complete system comprising tray that is hot swappable and can be pulled provided for telecom power supply bus connec- power, drives, cooling, and a card cage. The directly out the front of the chassis. The rota- tions. The backplane is also designed to pro- FTC610 is designed for mounting in standard tional speeds of all the fans are monitored. If a vide proper isolation for hazardous voltages. 19" equipment racks. fan drops below a programmable trip point an Provisions are also included for support of The FTC610 is manufactured primarily out alarm is reported. Air is typically drawn in Basic level CompactPCI Hot Swap. of steel. All surfaces are painted or plated for from the front of the chassis and exhausted out DTI also offers several 6U CompactPCI corrosion resistance. The standard color is the top. All intake air is filtered through easily processor cards for use in the FTC610. The beige, although custom colors or paint schemes replaced and cleaned filter elements. processor cards typically include interfaces can be provided. The system is 14 inches or 8U The FTC610 supports a large number of such as 10/100 ethernet, ultra-wide SCSI, in height, 19 inches in overall width, and 14.5" drives. The standard configuration has one slot video, EIDE, floppy, parallel, and serial ports. in depth. Typical weight of a configured which supports one 1.44MB floppy drive and Provisions are made for cabling to the proces- FTC610 is 45 pounds. Flanges are provided for one IDE CD-ROM. Four SCA SCSI devices sor card through the rear of the FTC610 via a mounting the FTC610 in a rack. are supported for hot-plug devices in the front transition card. Contact DTI Sales for details. The FTC610's power subsystem is designed of the unit. Two internal drives are also avail- to support a variety of configurations to meet a able with an optional kit. wide range of applications. Input to the power The FTC610's CompactPCI card cage sup- subsystem can be 110 to 220 volt AC or -48 volt ports eight slots. The standard backplane pro- DC. The power subsystem is made up of 350 vided with the FTC610 has slots for a processor All products are shipped FOB factory (MS). watt modules. A second module can be added module, seven CompactPCI expansion cards, Specifications subject to change without notice. to provide N+1 Redundancy. Each power mod- three power supplies, and four SCA drives. The Trademarks are the property of their respective owners. ule incorporates a front panel power fail indica- processor slot is 2.4 inches wide to allow for tor. advanced CPUs with proper heat sinks. The (C) Copyright 2004 by Diversified Technology. All rights reserved. The FTC610's cooling subsystem is designed expansion slots are all 6U in height. The back- to efficiently cool the system under adverse plane incorporates support for the CompactPCI conditions and be easily maintained. A total of Computer Telephony Specification (and there- 270 CFM of air is moved by the fans. Fans for fore ECTF H.110) at all seven expansion slots. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39157