DIVERSIFIED TECHNOLOGY cPS-4081a

4U CompactPCI PSB System Platform cPS-4081 • 4U, 19-inch Rackmount Enclosure ® • PICMG 2.16 Compliant Backplane • Eight, 6U Slots - One Switched Fabric & Seven 64-bit/66MHz Node Slots • 2 PCI Bus Segments Supporting H.110 Computer Telephony Bus • Eight, 6U Rear Panel I/O Slots • N+1 Redundant, Load-sharing, Hot-swappable 250W AC Power Supplies • Efficient Side-to-Rear Cooling • IPMI-based, Star Topology Chassis Management Module • Secure, Comprehensive LOM Diversified Technology's cPS-4081 4U general purpose CompactPCI PSB System Platform, part of DTI's PlexSys family of PICMG 2.16-compliant building blocks, provides telecom and Internet IP-based OEMs an open standards ecosystem for application solutions development. The cPS-4081 rugged, designed-for-NEBS enclosure features an 8-slot transversely mounted backplane with one dedicated 10/100/1000 Ethernet switched fabric slot, two system master and five node slots. Accepting 6U cards at the front and rear, the backplane provides two CompactPCI bus segments as well as support for the H.110 computer telephony bus for high density computing. All slots are served by redundant fabric connections, allowing for full system fail-over in the event of fabric failure. Backplane interconnect speeds are user-definable and scaleable from 10Mbps to 2000Mbps per node slot allowing users to cost effectively grow as the need aris- es. The hot-swappable blower tray, with two blowers, provides efficient side-to-rear cooling, and coupled with three N+1 redundant, load-sharing 250W AC 47-pin connector power supplies, creates a highly available, high den- sity computing environment. The 3U IPMI 1.0-compliant cCM-3402 chassis management module manages processor blade traffic, and monitors system status including presence, power-on, temperature, voltages, fan speeds, and health of components. It communicates with the system using an IPMB bus in a star topology to achieve secure, comprehensive, lights-out management. An exclusive, out-of-band 10/100 Ethernet manage- ment port avoids impacting traffic on the primary network. The cPS-4081 supports a PICMG 2.16-compliant switched fabric blade such as the DTI cSB-4240 Ethernet layer 2/3 Switch. Compact, durable, reliable. Compatible with Diversified Technology's PlexSys series of processor blades and switches, the cPS-4081 system platform is the reasoned choice for OEMs addressing web/e-mail/cache server, VPN switcher, media gateway, 2.5G and 3G wireless, server clusters, IP DSLAM and voice/video/data server markets. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev. 1.2 July 2003 All trademarks and tradenames are the property of their respective owners. cPS-4081 4U CompactPCI PSB System Platform Front Rear SPECIFICATIONS Dimensions Power Supply Regulatory Compliance (cont’d) • 6.94" H x 17.2" W x 12.2" D • Three N+1 redundant, 3U load-sharing • EMC/EMI: FCC 47 CFR Part 15, (176mm x 437mm x 310mm) 250W AC, 47-pin Subpart B, Class B; EN55022, +5V/80A, +12V/11A, +3.3V/80A, -12V/1A EN50081-1/CISPR22; Bellcore GR-1089; Weight Assumes two of three operating EN55024 • 30.5lbs (13.9kg) Total combined output from 3.3V & 5V not to Ordering Information exceed 80A Construction/Finish cPS-4081 • Input Voltage: 110 or 220 VAC • Cold roll steel (CRS) with nickel plating 4U PSB system platform includes an enclo- • Input Frequency: 50Hz - 60Hz • Removable mounting brackets sure, backplane, three power supplies, fan • Input Current: 4A max/115V, 2A max/230V • Beige tray, and chassis management module • Efficiency: 65% min. Backplane • MTBF: 50,000 at 65°C ambient • 8 6U slots, 3.3 or 5V V(I/O), IEEE 1101.10 Options temperature (fan) front, IEEE 1101.11 rear cSB-4240 Ethernet switch Environmental • 1 Ethernet fabric slot, top Filler Panels Operating • 7 node slots, slots 3 & 7 support 4HP See also cPB-4305, cPB-4321 or cPB4325 • Temperature: 5° to 40°C / 41° to 104°F system master blades processor blades; cRT-455P rear panel I/O • Humidity (RNC): < 95% @ 40°C/104°F • Dual PCI buses transition module • Altitude: 3048m / 10,000ft • Dual H.110 buses • Shock: 10G per ASTM 0775 • Rear panel I/O, 8 6U x 4HP x 80mm slots • Vibration: 16-200Hz @ 0.25G • Conforms to PICMG 2.0, R2.1 (Core), 2.1, • Acoustic Noise: <50dB at 1mm in front R2.0 (Hot Swap), 2.16, R1.0 (PSB), 2.5, at full load R1.0 (Computer Telephony), 2.11 (Power Storage and Transit I/F), and 2.9 R1.0 (Management) specs. • Temperature: -40° to +70°C / 32° to 158°F Peripherals/Other • Humidity (RNC): 10 to 95% @ 40°C/104°F • 3U Chassis Management Module slot • Altitude: 15,240m / 50,000ft See also cCM-3402 Data Sheet • Shock: 40G, 11ms duration (in approved packaging) Controls/Indicators • Vibration: 5-300Hz @ 1.03G • Rear power on/off All products are shipped FOB factory (MS). • Front & rear chassis ESD ground (in approved packaging) Specifications subject to change without notice. • Rear chassis ground Trademarks are the property of their respective Regulatory Compliance owners. I/O • Designed for NEBS/ETSI • Rear panel AC power inlet (C) Copyright 2003 by Diversified Technology. • CE Certification All rights reserved. Thermal Management • Safety: UL/cUL 60950; EN/IEC 60950; • One hot-swap fan tray with two blowers CB Report Scheme CB Certificate and • Side-to-rear air flow Report • 200LFM/slot www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158