DIVERSIFIED TECHNOLOGY cPS-5088

Product Brief ® ™ Intel NetStructure ZT 5088 12U General Purpose Packet Switched Platform High Availability Product Overview � Five-nines availability ® ™ The Intel NetStructure ZT 5088 12U General � Redundant, hot-swappable modules for Purpose Packet Switched Platform is an fault recovery extremely flexible, high-availability platform, - Two PICMG 2.16 10/100/1000 fabric slots configurable for both compute-intensive and I/O-intensive applications. It is one of several - Two IPMI-based chassis management telecom building blocks from Intel, built on the modules PICMG* 2.16 specification, providing OEM - N+1 cooling architecture equipment designers with carrier-grade, - N+N load-sharing 250W AC or DC standards-based solutions. This high-capacity power supplies CompactPCI* platform features innovative power � Redundant power input (front- or rear panel and cooling. In addition to its high-availability cabling) features, the ZT 5088 platform is highly modular, � Dual-power domain midplane isolates scalable, and extremely serviceable. It is ® catastrophic power failures designed to interoperate with the entire Intel ™ Highly Flexible NetStructure family of packet switched Intel in Multiple midplane configuration options backplane products, and with third-party boards Communications meeting the PICMG 2.16 specifications. � All node slots support 32/64-bit, 33/66MHz single board computers and peripherals The ZT 5088 platform supports five-nines � Four PCI bus segments (99.999%) availability with built-in redundancy for � active system components including Ethernet 21 rear-panel I/O slots (18 node slots, two switches, chassis management modules, power fabric slots, and two 3U CMM slots) supplies and fan trays. Redundant chassis Highly Manageable management modules enable customers to � IPMI-based, PICMG 2.9-compliant manage multiple SBCs and conduct chassis redundant chassis management modules diagnostics remotely for enhanced system reliability. � Unique star topology for increased reliability and security The ZT 5088 platform routes Ethernet signals across the backplane without the use of cables, Highly Serviceable � saving time in set-up, maintenance and repair, All Field-Replaceable Units (FRUs) and minimizing the thermal challenges of serviceable from the front (except rear-panel traditional cabling methods. transition boards) Highly Scalable � Processors, I/O boards, power, and cooling Product Highlights High Capacity � 12U, 19-inch rack-mount enclosure � 21 slots (18 node slots, two fabric slots, and two 3U chassis management slots) � Up to 50W per node slot and 80W per fabric slot power and cooling � Designed for NEBS Level 3 and ETSI installations Fan Tray Fan Tray Fan Tray OR Power Domain 1 Power Domain 2 Slots 2 through 12: Slots 13 through 21: Switch A & 9 Nodes Switch B & 9 Nodes (PCI Segments 1 & 2) (PCI Segments 3 & 4) OR Power Subsystem A Power Subsystem B Power Feed Power Feed A B Isolated Redundant 2 Independent N+N Power Input (AC or DC) Power Subsystems ® ™ Product Brief Intel NetStructure ZT 5088 Flexible Midplane Configurations The ZT 5088 can also be configured to support two extended The midplane is flexible and can accommodate multiple configur- bus segments. PCI segments one and two are bridged together ations. It supports up to 18 independent servers communicating using Intel’s ZT 5524A System Master Processor Board and ZT over the PICMG 2.16-compliant Ethernet midplane (slots 3-20), 4901A I/O Mezzanine Expansion Card, mated together and or four dedicated system masters supporting four independent installed in slots 7 and 8. PCI bus segments (see Figure 1). By bridging segments one and two together, one system master can control seven peripheral slots at 66MHz bus speed. The same bridging can be performed on PCI segments three and four with the ZT 5524/ZT 4901 pair installed in slots 16 and 17. 18 PICMG* All slots support IEEE 1101.11-style, 80mm-deep transition cards 2.16-compliant Slots Fan Tray 1 Fan Tray 2 Fan Tray 3 in the rear-panel I/O section, directly behind the midplane. Each 21 RPIO available node and fabric slot may be independently configured for 3.3V S1 S2 S3 S4 or 5V VI/O operation 2 Redundant Chassis Management Modules Chassis Management Module ® ™ The ZT 5088 includes two redundant Intel NetStructure ZT 7102 2 Redundant chassis management modules (CMMs) that operate in active/standby Ethernet Fabric Slots Dual mode. The ZT 7102 is the central management component for Power ® ™ Input all Intel NetStructure PICMG 2.16-compliant platforms. It uses standards-based interfaces, allowing management of third-party IPMI-based products within a NetStructure platform. It communicates with components in the ZT 5088 platform via point-to-point IPMB busses in a unique star topology to achieve comprehensive, Figure 1: Component layout for ZT 5088 platform highly available management. Redundant Power Subsystems and Dual-Domain Architecture The ZT 5088 platform supports a redundant, scalable power solution, accommodating up to eight 3U CompactPCI power supplies, divided into two separate power subsystems. Each delivers power to one of the two power domains on the midplane. Each power subsystem supports N+N redundant power supplies and receives input power from redundant DC or AC inputs. This is critical in central office locations where two power plants deliver redundant DC input into high-availability devices. These two power subsystems maintain isolation of these inputs (no diode OR’ing) to ensure that failure of one will not affect the power input of the other. For high availability, and to isolate catastrophic events, the mid- plane is divided into two separate power domains. Each power domain supports one fabric slot and nine node slots. The redundant CMMs and fan trays draw power from both domains for continued operation, should one domain fail (see Figure 2). Figure 2: The ZT 5088 platform dual-power domain/redundant power-input architecture CMM A & B PS 1 PS 2 PS 3 PS 4 PS 5 PS 6 PS 7 PS 8 PSU 1 PSU 2 PSU 3 System Master PSU 4 System Master PSU 5 System Master PSU 6 System Master PSU 7 PSU 8 ® ™ Intel NetStructure ZT 5088 Product Brief Cooling Architecture 1 3 blowers per fan tray With 250W power supplies, the ZT 5088 platform Front Rear supports more than 40W per slot or, when scaled to 350W power supplies, powers and cools up to 50W per node slot and 80W per fabric slot. The platform houses three hot-swappable fan trays, serviceable from the front. Midplane Each tray includes three blowers, and spans the distance from front to back of the chassis. The front blower cools the front card cage area, and the rear blower cools the power supplies and rear of the card cage. The middle Power supply Air Flow blower cools both areas, providing N+1 redundant Power plane cooling for the entire chassis (see Figure 3). Front grill with filter Figure 3: Cross section/side view of the ZT 5088 platform Specifications The most current product specifications and order options are posted on the Web version of this product brief (developer.intel.com/design/network/products/cbp/linecard.htm). Specifications – The ZT 5088 platform is compliant with the following specifications: � CompactPCI* Core Specification, PICMG* 2.0 R2.1 � CompactPCI Hot Swap Specification, PICMG 2.1 R2.0 � CompactPCI System Management Specification, PICMG 2.9 R1.0 � CompactPCI Power Interface Specification, PICMG 2.11 R1.0 � CompactPCI Packet Switching Backplane Specification, PICMG 2.16 R1.0 � IPMI Specification, Version 1.5 � Standard CompactPCI Keying Power Input: 100-230 VAC (50-60Hz) or -36 to -60 VDC Output Voltage Output Current � Output: Assumes that 8 power supplies are installed, +5V 160A operating in the 4+4 configuration. The total wattage +3.3V 160A per supply not to exceed 250W. +12V 22A -12V 6A Physical � Height: 12U, 21" (533mm) � Width: 17.2" (436mm) without rack-mounted flanges. Rack-mount flanges allow mounting in 19-inch racks. � Depth: 17" (431mm) � Weight: 97.5 lbs. (44.2kg) Regulatory Compliance Pending � Safety UL/cUL 60950 Safety for Information Technology Equipment E179737 EN/IEC 60950 Safety for Information Technology Equipment CB Report Scheme CB Certificate and Report � Emissions Test Regulations FCC, CFR 47, Part 15, Class B EN 55022 CISPR 22 GR-1089-CORE Sections 2 and 3 EN 55022 Class B Radiated EN 55022 Power Line Conducted Emissions EN 61000-3-2 Power Line Harmonic Emissions EN 61000-3-3 Power Line Fluctuation and Flicker EN 61000 4-2 Electro-Static Discharge (ESD) EN 61000 4-3 Radiated Susceptibility EN 61000 4-4 Electrical Fast Transient Burst EN 61000 4-5 Power Line Surge EN 61000 4-6 Frequency Magnetic Fields EN 61000 4-11 Voltage Dips, Variations, & Short Interruptions ™ ® Product Brief Intel NetStructure ZT 5088 Ordering Information ® ™ The Intel NetStructure ZT 5088 12U General Purpose ZT 5524A-1B: Single 933MHz Intel Pentium III processor – Packet Switched Platform includes the enclosure with PICMG Low Power, SDRAM DIMM socket, single slot 2.16-compliant midplane, eight power supplies, two ZT 7102 ZT 4807: Rear-Panel Transition Board chassis management modules, and three fan trays. ZT 4901A: I/O Mezzanine Expansion Card ZT 5088AC: Includes AC power input panel Ethernet Switch ZT 5088DC: Includes DC power input panel ZT 8101: 10/100 24-port Ethernet managed Layer 2/3 The ZT 5088 platform is designed to interoperate with the Switch with 2Gbps uplinks following Intel NetStructure building blocks (please see ZT 8102: 16 port Layer 2/3 Gigabit Ethernet Switch individual product briefs for details): ZT 8102HA: 16 port Layer 2/3 Gigabit Ethernet Switch Processor and I/O Boards with high availability management software ® ® ZT 5504B-1A: 1GHz Intel Pentium III processor – Low Management Power, 512 MB ECC SDRAM, EIDE hard drive, and SVGA ZT 7102: IPMI-based chassis management module ZT 5504B-1B: 1GHz Intel Pentium III processor – Low Power Supplies Power, 1GB ECC SDRAM, EIDE hard drive, and SVGA ZT 6303: 250W AC power supply ZT 5504B-1C: 1GHz Intel Pentium III processor – Low ZT 6313: 250W DC power supply Power, 1GB ECC SDRAM, EIDE hard drive, SVGA, and Fan Tray CD-ROM mezzanine card ZT 5061: Fan tray with blowers ZT 5524A-1A: Dual 933MHz Intel Pentium III processors – Low Power, SDRAM DIMM socket, single slot Intel Access Developer’s Site: developer.intel.com Networking and Communications Building Blocks: developer.intel.com/design/network Other Intel Support: Intel Literature Center developer.intel.com/design/network (800) 548-4725 7 a.m. to 7 p.m. CST (U.S. and Canada) International locations please contact your local sales office. General Information Hotline: (800) 628-8686 or (916) 356-3104 5 a.m. to 5 p.m. PST For more information, visit the Intel Web site at: developer.intel.com UNITED STATES AND CANADA EUROPE ASIA-PACIFIC JAPAN SOUTH AMERICA Intel Corporation Intel Corporation (UK) Ltd. Intel Semiconductor Ltd. Intel Kabushiki Kaisha Intel Semicondutores do Brazil Robert Noyce Bldg. Pipers Way 32/F Two Pacific Place P.O. Box 115 Tsukuba-gakuen Rue Florida, 1703-2 and CJ22 2200 Mission College Blvd. Swindon 88 Queensway, Central 5-6 Tokodai, Tsukuba-shi CEP 04565-001 Sao Paulo-SP P.O. Box 58119 Wiltshire SN3 1RJ Hong Kong, SAR Ibaraki-ken 305 Brazil Santa Clara, CA 95052-8119 UK Japan USA TM 1 ® For details please refer to the Intel NetStructure ZT 5085 12U Redundant Host Packet Switched Platform Technical Product Specification at http://developer.intel.com/design/network/manuals/zt5085.htm INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Copyright © 2004 Intel Corporation. All rights reserved. Intel, the Intel logo, Pentium and NetStructure are trademarks or registered trademarks of Intel Corporation. Printed in USA 1004/DLC/OCG/XX/PDF Please Recycle 251266-003US