DIVERSIFIED TECHNOLOGY CPT605

CompactPCI Desktop Development System CPT605 ® • PICMG 2.0 R 2.1 • 1 Processor Slot; 3 Expansion Slots; 1 Power Supply Slot • Standard Floppy; 1 Full-Height or 2 Half-Height 5.25” IDE or SCSI Devices • Front Panel LEDs • 84 CFM Top-Mounted Fan Assembly • 150 W AC or DC Power Supply System • 18.5” H x 8.4” W x 14.5” D SPECIFICATIONS: PASSIVE BACKPLANE POWER SUPPLIES • PICMG 2.0 R 2.1 • Single 3U 150W CompactPCI supply • 6U CompactPCI backplane • Available in 120/240 VAC or -48VDC • One CPU, three Expansion, and one P/S slot front accessible PERIPHERAL SUPPORT • Contains built-in floppy, IDE, SCSI, and Wide • One 3.5” front access floppy bay SCSI connectors for quick cabling of drives • Two front access 5.25” HH drive bays (one FH) • Rear I/O slots available DIMENSIONS COOLING SUBSYSTEM • Exhaust fans above card cage 84 CFM total • Height: 18.5” • Top accessible with shroud removed • Width: 8.4” • Depth: 14.5” FRONT PANEL STATUS/CONTROLS • Weight: 30 lbs. (typical) • Status indicators on CompactPCI front panels • Breaker/Power switch on chassis front panel CHASSIS: • 18 GA. steel construction, plated for corrosion resistance ENVIRONMENTAL o • Polyurethane painted exterior, beige or black • Temperature: 0-30 C • Custom colors - Call for details • Vibration: 1.5G 3 Axis • Humidity 10-90% non-condensing www.dtims.com Rev. 1.2 1.800.443.2667 July 2003 All trademarks and tradenames are the property of their respective owners. CPT605 CompactPCI Desktop Development System This chassis is manufactured of 18 front and rear mounted 6U cards. The captive thumb screws and the fans are gauge steel that is post plated and painted front accessible slots include one CPU (PII equipped with quick-disconnect harnesses with polyurethane paint on the exterior. available), three expansion slots, and one for easy removal. The air intake is filtered The exterior appearance is suitable for an power supply slot. Connectors are avail- and located on the back of the unit at the office environment. able for rear I/O cards as well. drive access panel. A snap on retainer The drive bay options include one 3.5” The front loading cards allow easy secures the filter and allows for quick floppy bay and one 5.25” full-height drive access and quick removal of plug-in cards. access to the filter for cleaning or replac- bay that are front accessible. Access to the The status indicators for the cards are ing. mounting holes and the cables of the drives located on the front panels of the individ- Contact the DTI Sales & Marketing is quick and easy. With the shroud ual cards. Department for more information. removed, the mounting for all drives is The power supply which plugs directly accessible from the sides of the chassis. in to the backplane is a 3U 150W, The drive access panel on the back of the 120/240VAC or -48VDC. A power chassis is secured with quarter-turn fasten- switch/breaker is located on the front panel ers and allows access to the back of the of the chassis adjacent to the floppy drive drives for cabling. The CompactPCI back- bay. All products are shipped FOB factory (MS). Specifications subject to change without notice. plane is equipped with built-in floppy, The cooling fans are located inside the Trademarks are the property of their respective owners. IDE, SCSI, and Wide SCSI connectors for shroud above the card cage. The 3.15” Copyright 2001 by Diversified Technology. All rights reserved. quick cabling of drives. fans (42 CFM each) are mounted to a The CompactPCI backplane allows for removable plate. The plate is secured with www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158