8U CompactPCI PSB System Platform cPS-8161 • 8U, 19-inch Rackmount Enclosure ® • PICMG 2.16 Compliant Backplane • 16x 6U Slots - 2x Switched Fabric, 2x System and 12x 64-bit/66MHz Node Slots • 2 PCI Bus Segments Supporting H.110 Computer Telephony Bus • Sixteen 6U Rear Panel I/O Slots • N+1 Redundant, Load-sharing, Hot-swappable 200W AC or DC Power Supplies • Hot-swap Fan Tray Diversified Technology's cPS-8161 8U general purpose CompactPCI PSB System Platform, part of DTI's PlexSys family of PICMG 2.16-compliant building blocks, provides telecom/datacom and Internet IP-based OEMs an open standards ecosystem for application solutions development. The cPS-8161 rugged, enclosure features a 16-slot backplane with two dedicated 10/100/1000 Ethernet switched fabric slots, two system master and twelve node slots. Accepting 6U cards at the front and rear, the backplane provides two CompactPCI bus segments as well as support for the H.110 computer teleph- ony bus for high density computing. All slots are served by redundant fabric connections, allowing for full system fail-over in the event of fabric failure. Backplane interconnect speeds are user-definable and scaleable from 10Mbps to 2000Mbps per node slot allowing users to cost effectively grow as the need arises. The hot-swappable fan tray provides 360 CFM of front cooling and an optional 120 CFM of rear cooling, provides efficient bottom and front front-to-top cooling, and coupled with three N+1 redundant, load-shar- ing 200W AC or DC 47-pin connector power supplies, creates a highly available, high density computing environment. The cPS-8161 supports a PICMG 2.16-compliant switched fabric blade such as the DTI cSB-4240 Ethernet layer 2/3 Switch. Durable, fault tolerant, and compatible with Diversified Technology's PlexSys series of processor blades and switches, the cPS-8161 system platform is the right choice for OEMs addressing web/e-mail/cache server, VPN switcher, media gateway, 2.5G and 3G wireless, server clusters, IP DSLAM and voice/video/data server markets. www.dtims.com • sales@dtims.com • 1.800.443.2667 Rev. 1.5 September 02, 2004 All trademarks and tradenames are the property of their respective owners. cPS-8161 8U CompactPCI PSB System Platform Front Rear Exhaust 17.2” W Rack Mounting Flanges Rear I/O Cards 14” H Front Cards Power Input Power Fan Tray Supplies (3) 14.5” D SPECIFICATIONS Dimensions Thermal Management Regulatory Compliance • 14.0" H x 17.2" W x 14.5" D • One 360CFM hot-swap fan tray with four Safety (356mm x 437mm x 368mm) front fans and three optional rear fans • UL/cUL 60950-1:2003, EN/IEC 60950-1:2001 • Front and bottom intake, top exhaust air flow EMC Class A Weight • >300LFM/slot • FCC 47 CFR part 15-B, CISPR22:1997/ • 40lbs (18.2kg) typical • Fans are 12VDC and rated at 40CFM EN55022:1998, EN55024:1998 • Fans are monitored through chassis Immunity Construction/Finish management module • EN 55024/CISPR 24 • .09 & .062 Aluminum (5052-H32) • Removable mounting brackets Power Supply Ordering Information • Built-in Front mounting • Three N+1 redundant, 3U load-sharing 200W cPS-8161AC AC or DC, 47-pin 8U general purpose PSB system platform Backplane +5V/64A, +12V/9A, +3.3V/64A, -12V/3A includes an enclosure, backplane, two power • 16 6U slots, 3.3 or 5V V(I/O), IEEE 1101.10 Assumes two of three operating supplies, and fan tray Total combined output from 3.3V and 5V not to front, IEEE 1101.11 rear exceed 64A • 2 Ethernet fabric slots cPS-8161DC • Input Voltage: 90-264 VAC or -36 to -75VDC • 14 node slots, slots 1 & 10 support 4HP 8U general purpose PSB system platform • Input Frequency: 47Hz-63Hz system master blades includes an enclosure, backplane, two power • Input Current: 8A max/115V, 4A max/230V • Dual PCI buses supplies, and fan tray. • Efficiency: 80%,nominal @ full rated load • Dual H.110 buses • MTBF: 160,000 at 65°C ambient temperature • Rear panel I/O, 16 6U x 4HP x 80mm slots Options (fan) • Conforms to PICMG 2.0, R2.1 (Core), 2.1, cSB-4240 Ethernet switch • Power Supplies are rated at 250W, but R2.0 (Hot Swap), 2.16, R1.0 (PSB), 2.5, R1.0 Filler panels should no exceed 200W in this unit (Computer Telephony), 2.11 (Power I/F) Addition Power Supplies Environmental Peripherals/Other See also cPB-4612, cPB-4325, cPB-4321 or Operating • 3.5" FDD and CD-ROM cPB-4305 processor blades and cRT-455P • Temperature: 10° to 40°C / 50° to 104°F • Dual 3U Chassis Management Module slots rear panel I/O transition module • Humidity (RNC): 10 to 95% @ 40°C / 104°F * See also cCM-3402 Data Sheet • Vibration: 5-100Hz @ 1G • Acoustic Noise: <50dB at 1mm in front at full Controls/Indicators load • Front power on/off Storage and Transit (in approved packaging) • Front and rear chassis ESD ground • Temperature: -40° to +66°C / 32° to 151°F • Rear chassis ground • Humidity (RNC): 10 to 95% @ 40°C / 104°F All products are shipped FOB factory (MS). Specifications subject to change without notice. • Altitude: 15,240m / 50,000ft I/O Trademarks are the property of their respective • Shock: 24” free fall • Rear panel AC or DC power inlet owners. • Vibration: 0.5G 5-50Hz, 3G 50-500Hz (C) Copyright 2004 by Diversified Technology. All rights reserved. www.dtims.com 1.800.443.2667 476 Highland Colony Parkway • Ridgeland, MS 39158