QPMC-1553 High Density PMC Interface MIL-STD-1553 Features 1, 2 or 4 Independent MIL-STD-1553 Dual Redundant Channels ■ Multi-function Features - Simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor ■ Single-function Features - Bus Controller or 31 Remote Terminals or Bus Monitor ■ Bus Controller - BC - BC->RT, RT->BC, RT->RT - Mode Codes, Broadcast and single-shot messaging -Programmable time delays -Major/Minor frames Condor's QPMC-1553 provides new levels of Multi-function Interfaces - Real-time conditional branching performance and flexibility for MIL-STD- QPMC-1553 multi-function interfaces are - Two aperiodic messaging methods 1553A/B Notice II in the PMC form factor. easily configured to operate with ■ Remote Terminal - RT Available in commercial, ruggedized and simultaneous Bus Controller, 31 Remote - RT data wrapping conductively cooled versions with one, two or Terminals and Bus Monitor functionality. - Multiple RT buffers four dual-redundant channels, the QPMC- - Dynamic Bus Control Single-function Interfaces - Automatic Mode Code 1553 includes advanced API (Application and Status Bit responses Single-function QPMC-1553 interfaces have Programming Interface) software that -Programmable response time all the features and functionality of the reduces application development time. -RT Map Monitoring multi-function versions, but only one major Standard features include selectable ■ Bus Monitor - BM operational mode is enabled at a time. transformer or direct coupling, 1 Mbyte of - Full error detection Each interface can emulate either a Bus RAM per channel, 45-bit message time- - Multiple monitoring methods Controller or 31 Remote Terminals or Bus tagging, triggers, extensive BC & RT link-list - 45-bit time-tagging Monitor. structures, error detection/insertion, - Adv. interrupts and triggers automatic/manual RT Status Bit and Mode ■ Architecture Software Code responses, along with advanced BC - BC & RT error injection/detection Condor provides our advanced 1553 API functionality. An IRIG B signal Receiver/ - DYNAMIC architecture in source code, along with support for - BC & RT link list structures Generator with GPS synchronization, variable - 1 Mbyte RAM per channel Windows XP, 2000, Me, NT, 98, 95, Linux, voltage output and RS-422/485 outputs are - Direct & transformer coupling VxWorks and other operating systems optional. With the highest speed encoder/ - Environmental options (Solaris support optional). To access 1553 decoder in the industry, the QPMC-1553 Bus ■ Software Support functionality without software develop- Monitor provides unparalleled error detection - Advanced, high-level API ment, BusTools/1553, Condor’s MIL-STD- and 100% monitoring of a fully loaded buses. - Source code included 1553 bus analysis, simulation and data -BusTools Analyzer optional logging/monitoring solution is available. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630  www.condoreng.com QPMC-1553 High Density PMC Interface MIL-STD-1553 Specifications Description Physical Bus Controller  Single-wide PMC card (74mm x 149mm)  Programmable control over: - Major and minor frame content and timing Environmental - Intermessage gap times  Commercial operating temp. range: 0°C to +70°C - Response time-out and late response  Optional temperature range : -40°C to +71°C - Multiple BC retry  VITA 20-200x conduction cooled option  Modify messages, data or setup while card is running  Available in Commercial, Ruggedized and  Insert aperiodic messages into a running BC list Conduction Cooled configurations  “Oneshot“ mode for simplified BC operation  Conditional message sequencing based on real-time Software Support message data or status  API - High-level libraries with source code included  Selectable interrupt generation and status messages for Windows XP, 2000, Me, NT, 98, 95, Linux - Full range of system conditions and VxWorks - All detected errors  GUI - Optional BusTools/1553 GUI bus analyzer  Full error detection  Contact the factory about Solaris support - Invalid word - Late response Connections - Bit count error - Early response  Direct or transformer coupling - High word - No response  Input and output triggers - Low word - Incorrect RT address  Front panel bezel or P14 I/O connections - Inverted sync - Parity error  Transition cabling to 1553 cable jacks included on - Manchester  Extensive programmable error injections (on a per word basis) front panel configurations  Synchronize BC operation to external time source Multi-function Operational Modes Remote Terminal  Simultaneous BC, 31 RTs and BM  Multiple RT simulation (up to 31 RTs) Single-function Operational Modes  Programmable error injection (on a per word basis)  BC or 31 RTs or BM  Modify data, status words or setup while card is running  Programmable message content (linked message buffers) Power (4 channels at 75% duty cycle)  Interrupts can be generated on a per message basis upon  +5 VDC @ 2.20A End of Message and error conditions  +3.3 VDC @ 150mA  RT Map Monitoring  7.2 W power dissipated on board Bus Monitor On-board Shared RAM  Capture 100% fully loaded bus traffic with:  1 Mbyte (per dual-redundant channel) - Time-tagging - Error status Options - Word status - Message status  Variable voltage transceivers - RT response time  IRIG B Receiver/Generator  Interrupts can be selected by RT / SA / WC  Multiple avionics discretes  Extensive filtering and triggering options  RS-485/422 support for EBR/MMSI only - By individual RT/subaddress - Transmit, receive or broadcast mode codes PCI Signal Compatibility - Internal or external triggering  Universal (5V or 3.3V) - Trigger output on user specified data  Real-time bus playback with RT edit mode Warranty: 3 year limited hardware warranty  45-bit, microsecond resolution timetagging No cost library card driver upgrades  IRIG/GPS synchronization Available Configurations See our on-line Configuration Guide for a complete list of available configurations QPMC-1553-1M MIL-STD-1553 multi-function, single channel, fixed voltage PMC interface QPMC-1553-2M MIL-STD-1553 multi-function, two channel, fixed voltage PMC interface QPMC-1553-4M MIL-STD-1553 multi-function, four channel, fixed voltage PMC interface QPMC-1553-1S MIL-STD-1553 single-function, single channel, fixed voltage PMC interface QPMC-1553-2S MIL-STD-1553 single-function, two channel, fixed voltage PMC interface QPMC-1553-4S MIL-STD-1553 single-function, four channel, fixed voltage PMC interface -D suffix Rear I/O (P14) configuration -W suffix IRIG B Receiver/Generator option Other configurations available (special order) A channel is a dual-redundant A/B pair TM ©2003 Condor Engineering Inc. All rights reserved. Printed in the USA. BusTools/1553 is a trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000  Fax 805.963.9630  www.condoreng.com Specifications may change without notice. QPMC-1553 2/03