����������������� ��������� �������������������������� ���� �������� 1, 2 or 4 Independent MIL-STD-1553 Dual Redundant Channels � Multi-function or Single-function Configurations � Test and Simulation Features - On-board Test Bus - UUT transformer connection - Selective Real-time Playback - BC & RT error injection/ detection - Adv. interrupts and triggers - Optional BusTools/1553 Condor's QPCI-1553 provides new ������������������������� Analyzer (optional) levels of performance and flexibility for QPCI-1553 multi-function interfaces are � Bus Controller - BC MILSTD1553A/B Notice II for PCI easily configured to operate with - BC->RT, RT->BC, RT->RT backplane form factors. Available in simultaneous Bus Controller, 31 - Mode Codes, Broadcast and commercial and ruggedized versions Remote Terminals and Bus Monitor single-shot messaging with one, two or four dual-redundant functionality and comes with variable - Programmable time delays channels, the QPCI-1553 includes an voltage transceivers. - Major/Minor frames abstract API (Application Programming - Real-time conditional Interface) software that reduces �������������������������� branching application development time. - Two aperiodic messaging Single-function QPCI-1553 interfaces Standard features include 1 Mbyte of methods have all the features and functionality RAM per channel, 45-bit message of the multi-function versions, but with � Remote Terminal - RT time-tagging, triggers, extensive BC & only one operational mode enabled at - RT data wrapping RT link-list structures, error injection/ a time. Each interface can emulate - Multiple RT buffers detection, automatic/manual RT - 1760 startup time either a Bus Controller or 31 Remote Status Bit, Mode Code responses, - Programmable response time Terminals or Bus Monitor with fixed advanced BC functionality, IRIG-B - RT Map Monitoring voltage transceivers. signal Receiver/Generator with GPS synchronization, on-board Test Bus, � Bus Monitor - BM �������� UUT transformer connection, 1760 - Full error detection startup time with Busy bit set and - Multiple monitoring methods Our high-level "abstract" 1553 API is hardwired RT address lines. With the - 45-bit time-tagging provided in source code, along with highest speed encoder/decoder in the - IRIG-B Receiver/Generator integrated support for Windows XP , included industry, the QPCI-1553 Bus Monitor 2000, Me, NT, 98, 95, Linux, provides unparalleled error detection LabWindows/CVI, Visual Basic and � Architecture and 100% monitoring of fully loaded other operating systems. To access - BC & RT error injection/ buses. 1553 functionality without software detection development, BusTools/1553, Condor’s - 1 Mbyte RAM per channel MIL-STD-1553 bus analysis, simulation - Transformer & direct coupling and data logging/monitoring solution is - Avionics-level discretes available. 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 ��������� ����������������� �������������������������� ���� ��������������������� �������������� �������� ,������������� ■ PCI card (6.875" x 4.2") ■ Programmable control over: - Major and minor frame content and timing ������������� - Intermessage gap times ■ Standard operating temp. range: 0°C to +55°C - Response time-out and late response ■ Optional extended temp. range available - Multiple BC retry ■ �������� Modify messages, data or setup while card is running ■ Insert aperiodic messages into a running BC list ■ API - Includes high-level API libraries for Windows XP , 2000, ■ “Oneshot” mode for simplified BC operation Me, NT, 98, 95, Linux, LabWindows/CVI and ■ Conditional message sequencing based on real-time Visual Basic message data or status ■ Contact the factory about other OS support ■ Selectable interrupt generation and status messages ■ GUI - Optional BusTools/1553 GUI bus analyzer - Full range of system conditions (multi-function boards only) - All detected errors ■ LabVEW - Support optional ■ Full error detection ����������� - Invalid word - Late response ■ Transformer or direct coupling - Bit count error - Early response ■ Programmable input and output triggers - High word - No response ■ Ten programmable avionics level I/O discretes - Low word - Incorrect RT address ■ UUT transformer stub connection - Inverted sync - Parity error ■ Hardwired RT Address Line option - Manchester ■ Extensive programmable error injection (on a per word basis) �������������������������������� ■ Synchronize BC operation to external time source ■ Simultaneous BC, 31 RTs and BM (������-������� ■ Variable voltage transceivers ■ Multiple RT simulation (up to 31 RTs) ��������������������������������� ■ Programmable error injection (on a per word basis) ■ BC or 31 RTs or BM ■ Modify data, status words or setup while card is running ■ Fixed voltage transceivers ■ Programmable message content (linked message buffers) ■ ����������������� �!"#�����������$ Interrupts can be generated on a per message basis upon End of Message and error conditions ■ +5 VDC @ 1695 mA ■ RT Map Monitoring ■ +3.3 VDC @ 964 mA ,���������� ��%�����������&��������������’����� ■ Capture 100% fully loaded bus traffic with: ■ Universal (5V or 3.3V) - Time-tagging - Error status ■ Board compatible with PCI-X 1.0 and PCI slots - Word status - Message status ���’������������()� - RT response time ■ ■ Interrupts can be selected by RT/SA/WC 1 Mbyte per dual-redundant channel ■ Extensive filtering and triggering options *�������+�3 year limited hardware warranty - By individual RT/subaddress No charge library updates - Transmit, receive or broadcast mode codes - Internal or external triggering - Trigger output on user specified data ■ Real-time bus playback with RT edit mode ■ 45-bit, microsecond resolution timetagging ■ IRIG/GPS synchronization ■ IRIG-B Receiver (AM or DC/TTL)/Generator (DC/TTL) See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. QPCI-1553 4/06 Tel 805.965.8000 Fax 805.963.9630