����������������� �������� ��������������������������������� ���� �������� 1, 2 or 4 Independent MIL-STD-1553 Dual Redundant Channels � Multi-function Features - Simultaneous Bus Controller, 31 Remote Terminals and Bus Monitor � Single-function Features - Bus Controller or 31 Remote Terminals or Bus Monitor � Bus Controller - BC - BC->RT, RT->BC, RT->RT - Mode Codes, Broadcast and ������������������������� Condor's QCP-1553 provides new single-shot messaging levels of performance and flexibility for QCP-1553 multi-function interfaces are - Programmable time delays MIL-STD-1553A/B Notice II in a easily configured to operate with - Major/Minor frames CompactPCI form factor. Available in simultaneous Bus Controller, 31 - Real-time conditional commercial, ruggedized and 3U Remote Terminals and Bus Monitor branching conductively cooled versions with one, functionality. - Two aperiodic messaging two or four dual-redundant channels, methods the QCP-1553 includes advanced API �������������������������� (Application Programming Interface) � Remote Terminal - RT Single-function QCP-1553 interfaces software that reduces application - RT data wrapping have all the features and functionality - Multiple RT buffers development time. Standard features of the multi-function versions, but only - Dynamic Bus Control include selectable transformer or direct one major operational mode is enabled - Automatic Mode Code and coupling, 1 Mbyte of RAM per channel, at a time. Each interface can emulate Status Bit responses 45-bit message timetagging, triggers, either a Bus Controller or 31 Remote - Programmable response time extensive BC & RT link-list structures, Terminals or Bus Monitor. - RT Map Monitoring error injection/detection, avionics level discretes, automatic/manual RT Status � Bus Monitor - BM �������� Bit and Mode Code responses, along - Full error detection with advanced BC functionality. An Condor provides our advanced 1553 - Multiple monitoring methods IRIG-B signal Receiver/Generator is - 45-bit time-tagging API in source code, along with support optionally available. With the highest - Adv. interrupts and triggers for Windows XP , 2000, Me, NT, 98, 95, speed encoder/decoder in the Linux, VxWorks and other operating � Architecture industry, the QCP-1553 Bus Monitor systems. To access 1553 functionality - BC & RT error injection/ provides unparalleled error detection without software development, detection and 100% monitoring of a fully loaded BusTools/1553, Condor’s MIL-STD- - DYNAMIC architecture buses. 1553 bus analyzer, LabVIEW and - BC & RT link list structures LabVIEW Real-Time support is - 1 Mbyte RAM per channel optionally available. - Direct & transformer coupling - Environmental options � Software Support - Advanced, high-level API - Source code included - BusTools Analyzer optional 101 W. Anapamu Street, Santa Barbara, CA 93101 Tel 805.965.8000 • Fax 805.963.9630 �������� ����������������� ��������������������������������� ���� �������������� �������������� *������������� �������� ■ ■ Programmable control over: 3U Compact PCI card (6U faceplate available) ■ - Major and minor frame content and timing Standard configuration has front bezel I/O - Intermessage gap times ������������� - Response time-out and late response ■ Standard operating temperature range: 0°C to +70°C - Multiple BC retry ■ Relative humidity: 5 to 90% (non-condensing) ■ Modify messages, data or setup while card is running ■ Optional ruggedized, extended temp and conductively cooled ■ Insert aperiodic messages into a running BC list configurations ■ “Oneshot“ mode for simplified BC operation ■ Conditional message sequencing based on real-time �������� message data or status ■ API - High-level libraries with source code included for ■ Selectable interrupt generation and status messages on full Windows XP , 2000, Me, NT, 98, 95, Linux and range of system conditions or all detected errors VxWorks ■ Full error detection ■ GUI - Optional BusTools/1553 GUI bus analyzer - Invalid word - Late response (multi-function boards only) - Bit count error - Early response ■ Optional LabVIEW and LabVIEW Real-Time support - High word - No response ����������� - Low word - Incorrect RT address - Inverted sync - Parity error ■ Software-selectable direct or transformer coupling - Manchester ■ I/O triggers; 18 avionics-level discretes ■ Extensive programmable error injections (on a per word ■ Front I/O standard P2 rear I/O optional. basis) ■ Transition cabling to 1553 cable jacks included on front ■ Synchronize BC operation to external time source panel configurations %������+������� �������������������������������� ■ Multiple RT simulation (up to 31 RTs) ■ Simultaneous BC, 31 RTs and BM ■ Programmable error injection (on a per word basis) ��������������������������������� ■ Modify data, status words or setup while card is running ■ BC or 31 RTs or BM ■ Programmable message content (linked message buffers) ■ Interrupts can be generated on a per message basis upon ��������������������� !"�����������# ■ End of Message and error conditions ■ 2CH, 87% duty cycle, 1100mA @ 5VDC ■ RT Map Monitoring ■ 4CH, 87% duty cycle, 1700mA @ 5VDC *���������� ���$������������%&� ■ Capture 100% fully loaded bus traffic with: ■ 1 Mbyte (per dual-redundant channel) - Time-tagging - Error status ��’���������������$����� - Word status - Message status - RT response time ■ Universal (5V or 3.3V) ■ Interrupts can be selected by RT / SA / WC ■ 66/33 MHz PCI bus operation ■ Extensive filtering and triggering options ����������������������� - By individual RT/subaddress ■ 1, 2 or 4 dual-redundant channels - Transmit, receive or broadcast mode codes ■ Variable voltage transceivers - Internal or external triggering ■ Optional rear panel I/O - Trigger output on user specified data ■ Optional ruggedized, -40°C to +85°C operating ■ Real-time bus playback with RT edit mode temperature range ■ 45-bit, microsecond resolution timetagging ■ Optional ruggedized, extended temperature, conformal ■ IRIG/GPS synchronization coated, rear I/0, 3U only, VITA compliant conductive cooling (max +71°C rail temp) ■ Optional conformal coating ■ Optional IRIG-B Receiver (AM or DC/TTL) and Generator (DC/TTL) (�������)�3 year limited hardware warranty See our on-line Military Products Configuration Guide for available configurations. http://www.condoreng.com TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Tel 805.965.8000 Fax 805.963.9630 Specifications may change without notice. QCP-1553 4/06