MPC7447A PowerPC® Single Board Computer APPLICATIONS The VP 754/20x is a high performance, VME single board high-performance, 32-bit implementation of the computer specifically designed to address the needs of PowerPC RISC architecture combined with a full 128-bit the COTS military and commercial OEM in the embedded implementation of Freescale’s AltiVec™ technology. The real-time marketplace. This includes applications in board supports a dual EIDE interface, two Gigabit process control, medical systems and telemetry systems. Ethernet interfaces, graphics and four USB interfaces. To The VP 754/20x uses the Freescale® MPC7447A simplify the board’s integration, board support packages PowerPC® Host Processor. The MPC7447A is a are available for common operating systems. HIGHLIGHTS � 1.4 GHz PowerPC MPC7447A Processor: � High resolution graphics interface - 32 Kbytes L1 data cache � 2 async/synchronous RS232/422 serial channels - 32 Kbytes L1 instruction cache � 6 timers - 512 Kbytes L2 cache � Real time calendar/clock - Freescale AltiVec technology - IEEE 754-1985 compliant Floating Point Unit � VME-64 Interface supporting � Up to 1.25 Gbytes of 266 MHz DDR ECC SDRAM A32/A24/A16/D64/D32/D16/D8(EO),MBLT64 � 2 x 10/100/1000 Mbps Ethernet Interface � Single slot � Dual EIDE interface � P2 and P2/P0 Transition modules available � 1 x PMC Module interface (32/64-bit and 33/66 MHz) � Extended temperature version available: - -25°C to +70°C (E-Series) � 2 Mbytes battery backed SRAM - 1.4 GHz processor operating at 1.0 GHz � 64 Mbytes Flash EPROM � Support for VxWorks®, LynxOS® and Linux® 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor 1 x Ethernet PMC � Freescale® PowerPC® MPC7447A processor:- 2xUSB 1 x RS232 10/100/1000 Interface � operating at 1.4 GHz � 64 Kbytes L1 cache Graphics 2 x Serial 4xUSB Interface Controller � 512 Kbytes of L2 cache � Freescale AltiVec™ technology Bridge � IEEE 754-1985 compliant Floating Point Unit � 133 MHz CPU bus speed 6 Long Real-Time Duration Marvell Clock Timers MV64360 � no CPU fan 64-bit Discovery II PCI Bus � Marvell® Discovery™II (MV64360) PCI Bridge 3V Battery Flash MPC7447A Backed DRAM EPROM PowerPC SRAM � supporting up to 1.25 Gbytes DDR DRAM:- � 256 Mbytes soldered Digital 2xEIDE DDR I/O Universe II Interfaces SDRAM Interface � up to 1 Gbyte provided via a 200-pin SODIMM socket � supporting 266 MHz DDR ECC SDRAM I/O 1 I/O 2 2 x RS232/ 1 x Ethernet P0 VME 2xUSB PMC RS422/485 10/100/1000 � 72-bits wide using 2.5V DRAM Digital I/O Primary Secondary EIDE EIDE � accessible from PowerPC, PCI and VME bus P2 Flash Memory � 64 Mbytes Flash EPROM:- Other Functions Environmental Specification � 32-bits wide � 4 x USB 1.1 channels:- � operating temperatures:- Hard Disk Interface � 2 via front panel connectors � 0°C to +55°C (N-Series: 1.4 GHz) � EIDE Interface:- � 2 via P2 connector � -25°C to +70°C (E-Series: 1.4 GHz processor � primary and secondary interfaces via P2 operating at 1.0 GHz) � 6 x user timers:- � up to 4 drives supported � -40°C to +85°C (storage) � 4 x 32-bit timers within the MV64360 PCI � up to ATA100 speeds Bridge � 5% to 95% Relative Humidity (operating non-condensing) � 1 x 32-bit CPU Decrementer Ethernet Interface � 1 x 64-bit CPU Time Base � 5% to 95% Relative Humidity (storage � 2 x Gigabit Ethernet channels:- non-condensing) � 2 x digital I/O lines (unbuffered):- � 1 channel via a front panel RJ45 and � accessible via P2 connector 1 channel via P2 connector (See Note 2) Mechanical Specification � real time calendar/clock:- � supports 10Base-T, 100Base-Tx and � 6U form-factor single VME slot - front panel � with 256 bytes NVRAM 1000Base-Tx width 0.8 inch (20.3mm) � battery backed � implemented in the MV64360 PCI Bridge � utilizes a 160-way DIN connector for P1 and � diagnostic port for JTAG CPU emulator P2:- Graphics Interface � compatible with 96-way DIN connectors Battery Backed SRAM � implemented by a Silicon Motion SM722 � shock: � 2 Mbytes battery backed SRAM providing:- 20g, 11ms, ½ sine (operating); � 8 Mbytes video memory Software Support 30g, 11ms, ½ sine (non-operating) � resolutions up to 1280 x 1024; supporting � support for VxWorks, LynxOS and Linux � vibration: up to 16M colors 5Hz-2000Hz at 2g, 0.38mm peak displacement � LAN boot firmware included � accessed via a 15-way high-density connector (operating); on front panel Firmware Support 5Hz-2000Hz at 5g, 0.76mm peak displacement � PPCBoot for VxWorks, LynxOS and Linux:- (non-operating) PMC Interface � supports booting from Flash or Hard Disk � 1 x PMC site, within a single VME slot:- � supports remote boot over Ethernet variants fitted with P0 connector are � I/O via front panel supplied with VME64x handles � 64-bit rear I/O via optional P0 connector VME Interface (see Note 1) � implemented using Tundra® Universe II™ 5-row backplane is required to provide device connected to 64-bit PCI bus � 32/64-bit and 33/66 MHz PCI operation P2 access to Ethernet and Serial Interfaces � 3.3V signaling � VME Master/Slave � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 Serial Interfaces � auto system controller detect � implemented within the MV64360 PCI Bridge � full interrupter / interrupt handler support � 2 x serial interface channels supporting:- � 4 x 32-bit mailbox registers � 1 x RS232 via a 9-way D-type connector on � location monitors the front panel � both RS232/422/485 channels via P2 Electrical Specification connector (see Note 2) � all voltages to be within ±5% � asynchronous rates up to 250Kbps � +5V @ 6.8A (typical with 1.4 GHz CPU and � synchronous rates up to 4Mbps (SDLC and 256 Mbytes DRAM) HDLC) � +12V @ 0.1A: -12V@ 0.1A � CTS, RTS, DTR, DSR, RI and DCD modem � +12V and -12V routed to PMC Expansion from control signals VME bus ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (-xy) with selections from the following: VP 754/202-xy 1.0 GHz PowerPC MPC7447A CPU where x = where y= VP 754/203-xy 1.4 GHz PowerPC MPC7447A CPU 0 - 3-row P2 = EIDE, 2 x USB, 2 x GPIO 1 - 256 Mbytes Note: 3-row P2 and 5-row P2 refers to the type of P2 I/O connector required on the VME backplane All companies and product names are trademarks of their respective organizations. Datasheet Code 1484/0705 Specification subject to change; E and OE. © Concurrent Technologies 2005 2 x Ethernet Channels PMC Module Optional 64/32-bit PCI Bus