CONCURRENT TECHNOLOGIES VP 317/02x-U
Features
- 1 Gbyte of 266 MHz DDR ECC SDRAM
- 1.8 GHz Intel Pentium M Processor: 64 Kbytes L1 chache | 2 Mbytes L2 cache | no CPU fan; low power processor
- 2 x 10/100/1000 Mbps Ethernet interfaces: Gigabit Ethernet for VME64x backplane
- 2 x PMC module interfaces (32/64-bit and 33/66 MHz): expansion carrier for 2 more PMC sites
- 512 Kbytes of BIOS Flash EPROM
- 64 Mbytes of Application Flash EPROM
- Extended temperature versions, at 1.4 GHz, available: -25°C to +70°C (E-Series) | -40°C to +85°C (K-Series, includes humidity sealant)
- High performance EIDE interfaces with optional on-board disk drive or optional dual CompactFlash or MicroDrive carrier (in a single slot)
- High resolution graphics interface
- Keyboard and mouse interfaces
- Long durations timer, watchdog timer
- Other versions available, see seperate datasheets: 1.6 GHz processor - VP 315/02x-U | ruggedized air cooled - VP 315/022-RA | ruggedized conduction cooled - VP 315/022-RC
- Serial ATA interface: up to 150 Mbytes/s transfer rates
- Single slot
- Support for VxWorks, Linux, Windos NT, Windows 2000, Windows XP Embedded, RTX, Windows XP, QNX, Solaris, LynxOS and MS-DOS
- Up to 2 x Universal Serial Bus (USB 2.0) interfaces
- Up to 3 x serial channel interfaces
- VME-64 interface supporting A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardward byte-swapping
Datasheet
Extracted Text
- Intel® Pentium® M Processor 745 Dual PMC Embedded Controller RoHS 2002/95/EC APPLICATIONS The VP 317/02x-U is a PC-compatible high performance, VP 317/02x-U is suitable for a range of demanding high functionality VME processor board supporting the applications within the defense, industrial control, 1.8 GHz Intel®Pentium® M processor 745 or the 1.4 GHz telecomms, telemetry, scientific and aerospace markets. Intel® Pentium® M processor Low Voltage 738. This To simplify the board’s integration many popular single slot board features 2 PMC sites, 1 Gbyte of industry standard operating systems are supported. The soldered DDR ECC SDRAM and a variety of interfaces board is plug compatible with the VP 315/02x-U family. including an option for an on-board Hard Disk Drive, The VP 317/02x-U is the RoHS compliant version of the CompactFlash™ or Hitachi GST MicroDrive™. The VP 317/02x family. HIGHLIGHTS � 1.8 GHz or 1.4 GHz Intel Pentium M Processor: � Up to 3 x serial channel interfaces - 64 Kbytes L1 cache � Up to 2 x Universal Serial Bus (USB 2.0) interfaces - 2 Mbytes L2 cache � Long duration timer, watchdog timer - no CPU fan needed; low power processor � VME-64 interface supporting � 1 Gbyte of 266 MHz DDR ECC SDRAM A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with � High performance EIDE interfaces with optional on-board support for fast hardware byte-swapping disk drive or optional dual CompactFlash or MicroDrive � Single slot carrier (in a single slot) � Extended temperature versions, at 1.4 GHz, available: � Serial ATA interface: - -25°C to +70°C (E-Series) - up to 150 Mbytes/s transfer rates - -40°C to +85°C (K-Series, includes humidity sealant) � 2 x PMC module interfaces (32/64-bit and 33/66 MHz): � Other versions available, see separate datasheets: - expansion carrier for 2 more PMC sites - 1.6 GHz processor: VP 315/02x-U � 2 x 10/100/1000 Mbps Ethernet interfaces: - ruggedized air cooled: VP 315/022-RA - Gigabit Ethernet for VME64x backplane - ruggedized conduction cooled: VP 315/022-RC � 64 Mbytes of Application Flash EPROM � Support for VxWorks®, Linux®, Windows NT®, � 512 Kbytes of BIOS Flash EPROM Windows® 2000, Windows® XP Embedded, RTX®, � High resolution graphics interface Windows® XP, QNX®, Solaris™, LynxOS® and MS-DOS® � Keyboard and mouse interfaces 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Ethernet 10/100/ 32-bit PMC � 1.8 GHz Intel® Pentium® M processor 745, 1 x RS232 Graphics 1000Mbps PMC PMC Expansion uses �FC-PGA 478 (micro Flip-Chip Pin Grid Array) package Keyboard Mouse Interface Interface 1 x Serial I/O P0 P0 � 1.4 GHz Intel® Pentium® M processor Low Voltage 738, uses�FC-BGA 479 (micro Flip-Chip Ball Grid Array) package BIOS Application Real-Time Flash Flash Clock EPROM EPROM � Common processor features are:- 6300ESB ICH � 64 Kbytes of primary (L1) on-die cache 3V � 2 Mbytes of secondary (L2) on-die cache � 400 MHz Front Side Bus (FSB) 1 x Serial Pentium M Intel Universe II CF ATA Processor 855GME or TM � 1.6 GHz processor version available; see VP 315/02x-U datasheet Keyboard Soldered Byte EIDE 2 x Serial Mouse Intel � no CPU fan 2xUSB DDR Interface I/O Swap 82546GB P0 DRAM � utilizes 64-bit Intel® 855GME chipset:- � supports 400 MHz bus frequency � utilizes Intel® 6300ESB I/O Controller Hub VME � ITP debug port 2xRS232/ USB USB KBD Graphics 2 x Ethernet PMC P2 422/485 10/100/1000 I/O PMC (VITA 31.1) I/O SATA EIDE DRAM P2 Optional P0 � 1 Gbyte of 266 MHz DDR ECC SDRAM soldered on the board � single bit error correction; double-bit error Serial Interface Electrical Specification detection � 3 x serial channel interfaces � +5V@4.4A (typical at 1.8 GHz with 1 Gbyte � accessible from processor or VME bus DRAM) � 16550 compatible UART � +12V@0A; -12V@0A � front panel access:- EIDE Hard Disk Interfaces � 1 x RS232 via 26-way high density � +12V and -12V routed to both PMC sites and � supports up to Ultra-DMA 100 for high PMC expansion connector connector performance drives � rear panel access (see Note 2):- � two channels (primary and secondary) Environmental Specification � 2 x RS232/422/485, both via P2 � primary channel is accessible via P2:- � operating temperature:- � connects to an optional hard � 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz) Flash EPROM disk/flash/CD-ROM drive board � -25°C to +70°C (E-Series: 1.4 GHz) � 64 Mbytes Application Flash EPROM � secondary channel can be used for on-board � -40°C to +85°C (K-Series: 1.4 GHz) � 512 Kbytes of BIOS Flash EPROM disk drive or dual CompactFlash/MicroDrive � 10% to 90% Relative Humidity, non Type II drive carrier Other Peripheral Interfaces condensing (operating):- � PC-compatible Real Time Clock (Year 2000 � K-Series includes humidity sealant Serial ATA Interface compliant) � -40°C to +85°C (storage) � Serial ATA (SATA) interface:- � 2 x USB 2.0 interfaces, one via P2 connector � 10% to 90% Relative Humidity, non � one SATA port via P0 and one via optional P0 condensing (storage) � supports up to 150 Mbytes/s transfer rates � keyboard and mouse interfaces accessed via a � other versions available, see separate 26-way high-density connector on front panel Ethernet Interface datasheets:- and optionally via P0 connector � implemented by Intel® 82546GB LAN � rugged air cooled: VP 315/022-RA � watchdog timer Controller via 64-bit/66 MHz PCI bus � rugged conduction cooled: VP 315/022-RC � 1 x 32-bit Long Duration Timer with processor � two interfaces supporting 10Base-T, interrupt capability Mechanical Specification 100Base-TX, 1000Base-T:- � 6U form-factor � both interfaces accessed via optional P0 Software Support � single VME slot - front panel width 0.8inch � one channel switchable to front panel RJ45 � support for VxWorks, Linux, Windows NT, (20.3mm) � support for VITA 31.1:- Windows 2000, Windows XP Embedded, � utilizes 160-way DIN connectors for P1 � Gigabit Ethernet for VME64x backplanes Windows XP, RTX, QNX, Solaris, LynxOS and P2:- and MS-DOS Graphics Interface � compatible with 96-way DIN connectors � implemented by the Intel® 855GME GMCH host Firmware Support � optional P0 (for VME64x backplanes only) bridge providing:- � PhoenixPico BIOS™ � shock: � resolutions up to 2048 x 1536 @75Hz � comprehensive Power-On Self-Test (POST) 20g, 11ms, ½ sine (operating); � up to 16M colors � LAN boot firmware included 30g, 11ms, ½ sine (non-operating) � accessed via a 26-way high-density connector � vibration: VME Interface on front panel 5Hz-2000Hz at 2g, 0.38mm peak displacement � implemented by Tundra® Universe II™ device � analog graphics interface supported via P0 (operating); � VME Master/Slave 5Hz-2000Hz at 5g, 0.76mm peak displacement PMC Interface � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 (non-operating) � 2 x PMC sites and for both sites:- � fast hardware byte swapping � I/O via front panel, via P2 for site 1 selected variants are supplied with � auto system controller detect (see Note 2) and optionally via P0 for site 2 VME64x handles � full interrupter / interrupt handler support � 32/64-bit and 33/66 MHz PCI operation � bus error interrupt hardware � 3.3V PCI signaling Note 2: 5-row backplane is required to provide � expansion to optional dual PMC carrier board:- Safety P2 access to 2 x RS232/422/485 interfaces � using expansion connector (32-bit/33 MHz) and full 64-bit PMC I/O for PMC site 1 � PCB (PWB) manufactured with flammability � or using one baseboard PMC site rating of 94V-0 (64-bit/66 MHz) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (-xy) with selections from the following: VP 317/020-xyU 1.4 GHz Pentium M with 2 PMC sites Where x = P2/P0 Breakout combinations Where y = memory size VP 317/021-xyU 1.8 GHz Pentium M with 2 PMC sites 1 - 3-row I/O, P2= PMC1 32-bit, EIDE, USB 1 - reserved 2 - 5-row I/O, P2= PMC1 64-bit, EIDE, USB, 2xRS232/422/485 2 - 1 Gbyte AD CP1/DR1-z2 2.5 inch Hard Disk Drive Assembly 3 - 5-row I/O, P2 as x=2; P0= PMC2 64-bit, 1xGigE, see ++ AD 200/001-01 Dual CompactFlash/MicroDrive Carrier 4 - 5-row I/O, P2 as x=2; P0= PMC2 32-bit, VITA 31.1, USB, 1xSATA, see ++ AD CR2/PMC-zzU PMC Carrier Boards for 2 PMC modules CB 26D/124-00 VGA, Keyboard, Mouse, RS232 connector cable DS MSS/001-zzU Board with HDD, CD-RW/DVD, CompactFlash ++ when x=3 or 4 then Keyboard, Mouse, VGA available For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1521/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 Option Option Option Option PMC Module 64-bit PCI Bus 64-bit PMC expansion PMC Module
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the VP 317/02x-U have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods