CONCURRENT TECHNOLOGIES VP 315/02x-U
Features
- 1 Gbyte of 266 MHz DDR ECC SDRAM
- 1.6 GHz Intel Pentium M Processor: 64 Kbytes L1 chache | 1 Mbyte L2 cache | no CPU fan needed; low power processor
- 2 x 10/100/1000 Mbps Ethernet interfaces: Gigabit Ethernet for VME64x backplane (VITA 31.1)
- 2 x PMC module interfaces (32/64-bit and 33/66 MHz): expansion carrier for 2 more PMC sites
- 512 Kbytes of BIOS Flash EPROM
- 64 Mbytes of application Flash EPROM
- High perfromance EIDE interfaces with optional on-board disk drive or optional dual ComactFlash or MicroDrive carrier (in a single slot)
- High resolution graphics interface
- Keyboard and mouse interfaces
- Long duration timer, watchdog timer
- Other versions available: 1.8 GHz or 1.4 GHz processor: VP 317/02x-U | ruggedized air cooled: VP 315/022-RA | ruggedized conduction cooled: VP 315/022-RC
- Serial ATA interface: up to 150 Mbytes/s transfer rates
- Single slot
- Support for VxWorks, Linux, Windows NT, Windows 2000, Windows XP Embedded, Windows XP, RTX, QNX, Solaris, LynxOS and MS-DOS
- Up to 2 x Universal Serial Bus (USB 2.0) interfaces
- Up to 3 x serial channel interfaces
- VME-64 interface supporting A32/A24/A16/D64/D32/D16/D8(E0), MBLT64 and with support for fast hardware byte-swapping
Datasheet
Extracted Text
Intel® Pentium® M Processor Dual PMC Embedded Controller RoHS 2002/95/EC APPLICATIONS The VP 315/02x-U is a PC-compatible high performance, industrial control, telecomms, telemetry, scientific and high functionality VME processor board supporting the aerospace markets. To simplify the board’s integration 1.6 GHz Intel® Pentium® M Processor. This single slot many popular industry standard operating systems are board features 2 PMC sites, 1 Gbyte of soldered DDR ECC supported. The board is plug compatible with the SDRAM and a variety of interfaces including an option for VP 317/02x-U and VP 315/022-Rx families. The an on-board Hard Disk Drive, CompactFlash™ or Hitachi VP 315/02x-U is the RoHS compliant version of the GST MicroDrive™. The VP 315/02x-U is suitable for a VP 315/02x family. range of demanding applications within the defense, HIGHLIGHTS � 1.6 GHz Intel Pentium M Processor: � Keyboard and mouse interfaces - 64 Kbytes L1 cache � Up to 3 x serial channel interfaces - 1 Mbyte L2 cache � Up to 2 x Universal Serial Bus (USB 2.0) interfaces - no CPU fan needed; low power processor � Long duration timer, watchdog timer � 1 Gbyte of 266 MHz DDR ECC SDRAM � VME-64 interface supporting � High performance EIDE interfaces with optional on-board A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with disk drive or optional dual CompactFlash or MicroDrive support for fast hardware byte-swapping carrier (in a single slot) � Single slot � Serial ATA interface: - up to 150 Mbytes/s transfer rates � Other versions available, see separate datasheets: � 2 x PMC module interfaces (32/64-bit and 33/66 MHz): - 1.8 GHz or 1.4 GHz processor: VP 317/02x-U - expansion carrier for 2 more PMC sites - ruggedized air cooled: VP 315/022-RA � 2 x 10/100/1000 Mbps Ethernet interfaces: - ruggedized conduction cooled: VP 315/022-RC - Gigabit Ethernet for VME64x backplane (VITA 31.1) � Support for VxWorks®, Linux®, Windows NT®, Windows® 2000, Windows® XP Embedded, Windows® XP, � 64 Mbytes of Application Flash EPROM RTX®, QNX®, Solaris™, LynxOS® and MS-DOS® � 512 Kbytes of BIOS Flash EPROM � High resolution graphics interface 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Ethernet 10/100/ 32-bit PMC � Intel® Pentium® M Processor operating at 1xRS232 Graphics 1000Mbps PMC PMC Expansion 1.6 GHz:- � uses �FC-PGA 478 Keyboard Mouse 1 x Serial Interface Interface I/O (micro Flip-Chip Pin Grid Array) package P0 P0 � 64 Kbytes of primary (Level 1) on-die cache � 1 Mbyte of secondary (Level 2) on-die cache BIOS Application Real-Time Flash Flash Clock EPROM EPROM � 400 MHz Front Side Bus (FSB) 6300ESB ICH � 1.8 GHz or 1.4 GHz processor versions 3V available; see VP 317/02x-U datasheet � no CPU fan 1 x Serial Pentium M Intel Universe II CF ATA Processor 855GME or � utilizes 64-bit Intel® 855GME chipset:- TM � supports 400 MHz bus frequency Keyboard Soldered EIDE 2 x Serial Intel Byte � utilizes Intel® 6300ESB I/O Controller Hub Mouse 2xUSB DDR Interface I/O 82546GB Swap P0 DRAM � ITP debug port DRAM � 1 Gbyte of 266 MHz DDR ECC SDRAM soldered VME 2xRS232/ USB USB KBD Graphics 2 x Ethernet PMC P2 on the board 10/100/1000 I/O PMC 422/485 (VITA 31.1) I/O SATA EIDE � single bit error correction; double-bit error P2 detection Optional P0 � accessible from processor or VME bus Serial Interface Electrical Specification EIDE Hard Disk Interfaces � 3 x serial channel interfaces � +5V@4.1A (typical at 1.6 GHz with � supports up to Ultra-DMA 100 for high 1 Gbyte DRAM) performance drives � 16550 compatible UART � +12V@0A; -12V@0A � two channels (primary and secondary) � front panel access:- � +12V and -12V routed to both PMC sites � primary channel is accessible via P2 :- � 1 x RS232 via 26-way high density and PMC expansion connector connector � connects to an optional hard disk/flash/CD-ROM drive board � rear panel access (see Note 2):- Environmental Specification � 2 x RS232/422/485, both via P2 � secondary channel can be used for on-board � operating temperatures:- disk drive or dual CompactFlash/MicroDrive � 0°C to +55°C (N-Series: 1.6 GHz) Flash EPROM Type II drive carrier � 10% to 90% Relative Humidity, non � 64 Mbytes Application Flash EPROM condensing (operating):- Serial ATA Interface � 512 Kbytes of BIOS Flash EPROM � K-Series includes humidity sealant � Serial ATA (SATA) interface:- Other Peripheral Interfaces � one SATA port via P0 � -40°C to +85°C (storage) � PC-compatible Real Time Clock (Year 2000 � supports up to 150 Mbytes/s transfer rates � 10% to 90% Relative Humidity, non compliant) condensing (storage) Ethernet Interface � 2 x USB 2.0 interfaces, one via P2 connector � ruggedized versions available, see separate � implemented by Intel® 82546GB LAN and one via optional P0 datasheets:- Controller via 64-bit/66 MHz PCI bus � keyboard and mouse interfaces accessed via a � air cooled: VP 315/022-RA � two interfaces supporting 10Base-T, 26-way high-density connector on front panel � conduction cooled: VP 315/022-RC 100Base-TX, 1000Base-T:- and optionally via P0 connector � both interfaces accessed via optional P0 Mechanical Specification � watchdog timer � one channel switchable to front panel RJ45 � 6U form-factor � 1 x 32-bit Long Duration Timer with processor � support for VITA 31.1:- interrupt capability � single VME slot - front panel width 0.8inch (20.3mm) � Gigabit Ethernet for VME64x backplanes Software Support � utilizes 160-way DIN connectors for P1 � support for VxWorks, Linux, Windows NT, Graphics Interface and P2:- Windows 2000, Windows XP Embedded, � implemented by the Intel® 855GME GMCH host � compatible with 96-way DIN connectors Windows XP, RTX, QNX, Solaris, LynxOS bridge providing:- � optional P0 (for VME64x backplanes only) and MS-DOS � resolutions up to 2048 x 1536 @75Hz � shock: � up to 16M colors Firmware Support 20g, 11ms, ½ sine (operating); � accessed via a 26-way high-density connector � Phoenix® BIOS 30g, 11ms, ½ sine (non-operating) on front panel � comprehensive Power-On Self-Test (POST) � vibration: � analog graphics interface supported via P0 5Hz-2000Hz at 2g, 0.38mm peak displacement � LAN boot firmware included (operating); PMC Interface VME Interface 5Hz-2000Hz at 5g, 0.76mm peak displacement � 2 x PMC sites and for both sites:- � implemented by Tundra® Universe II™ device (non-operating) � I/O via front panel, via P2 for site 1 � VME Master/Slave (see Note 2) and optionally via P0 for site 2 selected variants are supplied with � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 � 32/64-bit and 33/66 MHz PCI operation VME64x handles � fast hardware byte swapping � 3.3V PCI signaling � auto system controller detect � expansion to optional dual PMC carrier board:- Note 2: 5-row backplane is required to provide � full interrupter / interrupt handler support � using expansion connector (32-bit/33 MHz) P2 access to 2 x RS232/422/485 interfaces � bus error interrupt hardware � or using one baseboard PMC and full 64-bit PMC I/O for PMC site 1 site (64-bit/66 MHz) Safety � PCB (PWB) manufactured with flammability rating of 94V-0 ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (-xy) with selections from the following: Where x = P2/P0 Breakout combinations Where y = memory size VP 315/022-xyU 1.6 GHz Pentium M with 2 PMC sites 1- 3-row I/O, P2= PMC1 32-bit, EIDE, USB 1 - reserved 2- 5-row I/O, P2= PMC1 64-bit, EIDE, USB, 2xRS232/422/485 2 - 1 Gbyte AD CP1/DR1-z2 2.5 inch Hard Disk Drive Assembly 3- 5-row I/O, P2 as x=2; P0= PMC2 64-bit, 1xGigE, see ++ AD 200/001-01 Dual CompactFlash/MicroDrive Carrier 4- 5-row I/O, P2 as x=2; P0= PMC2 32-bit, VITA 31.1, USB, 1xSATA see ++ AD CR2/PMC-zzU PMC Carrier boards for 2 PMC modules CB 26D/124-00 VGA, Keyboard, Mouse, RS232 connector cable DS MSS/001-zzU Board with HDD, CD-RW/DVD, CompactFlash ++ when x=3 or 4 then Keyboard, Mouse, VGA available For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1520/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 Option Option Option Option PMC Module 64-bit PCI Bus 64-bit PMC expansion PMC Module
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the VP 315/02x-U have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods