CONCURRENT TECHNOLOGIES VP 110/01x
Datasheet

Concurrent-Technologies-VP-110-01x-Intel-Pentium-III-M-Processor-CPU-Board-datasheet1-1467884428.pdf
134 KiB
Extracted Text
Intel® Pentium® III Processor - Low Power Embedded Controller APPLICATIONS The VP 110/01x is a PC-compatible high performance, Hard Disk Drive, CompactFlash™ or Hitachi GST high functionality VME processor board supporting MicroDrive™. The VP 110/01x is suitable for a range of either the 933 MHz or 800 MHz Intel® Pentium® III demanding applications within the industrial control, Processor - Low Power. This single slot board features 2 telecomms, telemetry, scientific and aerospace markets. PMC sites, up to 1 Gbyte of synchronous DRAM and a To simplify the board’s integration many popular variety of interfaces including an option for an on-board industry standard operating systems are supported. HIGHLIGHTS � 933 MHz or 800 MHz Intel Pentium III processor - Low � 1 x asynchronous RS232 serial channel Power: � Floppy disk interface - 32 Kbytes L1 cache � Watchdog timer - 512 Kbytes L2 cache - no CPU fan needed � Long Duration Timer � Up to 1 Gbyte of 133 MHz Synchronous ECC DRAM � 1 x Universal Serial Bus (USB) port � High performance EIDE interfaces with optional on-board � VME-64 Interface supporting disk drive or optional CompactFlash or Microdrive (in a A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with single slot) support for fast hardware byte-swapping � 2 x PMC module interfaces(32/64-bit at 33/66 MHz): � Single slot - Expansion carrier for 2 more PMC sites � Extended temperature versions available: � 2 x 10/100 Mbps Ethernet interfaces - -25°C to +70°C (E-Series) � 64 Mbytes of Application Flash EPROM - -40°C to +85°C (K-Series) � Support for VxWorks®, Linux®, Windows NT®, � 512 Kbytes of BIOS Flash EPROM Windows® 2000, Windows® XP, Embedded, � 512 Kbytes of battery backed SRAM Windows® XP, RTX®, QNX®, LynxOS®, Solaris® and � Keyboard and mouse interface MS-DOS® 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor 2 x Ethernet PMC 1 x RS232 10/100Mbps PMC PMC Expansion � 933 MHz or 800 MHz Intel® Pentium® III Processor - Low Power:- Header Header 2x � using a Flip-Chip CPU Keyboard Mouse Serial Intel Interface Interface Interface 82559ER � 32 Kbytes internal (L1) on-die cache � 512 Kbytes of secondary (L2) on-die cache BIOS Real-Time � no CPU fan; low power processor Flash Bridge Clock EPROM � utilizes 64-bit ServerWorks’ ServerSet™ III LE 32-bit PCI Bus chipset:- 3V CPU � supports 133 MHz bus frequency Pentium III Bus Battery Application ServerWorks Backed Flash Processor Universe II ServerSet™ III LE � ITP debug port SRAM EPROM Low Power DRAM Floppy � supporting up to 1 Gbyte of 133 MHz ECC EIDE Byte Disk USB S-DRAM Interfaces Swap Interface SDRAM:- � 256 Mbytes or 512 Mbytes soldered on the CF or TM board � up to 512 Mbytes provided via a SODIMM VME EIDE Universal P2 Optional socket Serial Bus P0 � single bit error correction; double-bit error P2 detection � accessible from Intel Pentium III processor or VME bus Other Peripheral Interfaces Eide Hard Disk Interfaces � PC-compatible Real Time Clock (Year 2000 � accessed via P2 connector compliant) Mechanical Specification � supports up to Ultra-DMA 100 for high � floppy disk interface via P2 connector � 6U form-factor performance drives (see Note 2) � single VME slot - front panel width 0.8inch � two channels (primary and secondary) � 1 x USB (Universal Serial Bus) interface via P2 (20.3mm) � primary channel is accessible via P2 connector connector (see Note 2) � utilizes a 160-way DIN connector for P1 and (see Note 2):- � Watchdog timer P2:- � connects to an optional � compatible with normal 96-way DIN � 1 x 32-bit Long Duration Timer with processor hard/floppy/flash/CD-ROM drive board connectors interrupt capability � secondary channel can be used for on-board � optional P0 (optional for VME64x backplanes � keyboard interface via 4-pin header disk drive or CompactFlash module or only) � mouse interface via 4-pin header Microdrive Type II drive carrier � shock: Software Support Ethernet Interface 20g, 11ms, ½ sine (operating); � Support for VxWorks, Linux, Windows NT, 30g, 11ms, ½ sine (non-operating) � two channels supporting 10Base-T and Windows 2000, Windows XP, Embedded, 100Base-Tx for UTP CAT-5 � vibration: Windows XP, RTX, QNX, LynxOS, Solaris, and 5Hz-2000Hz at 2g, 0.38mm peak displacement � implemented by two 82559ER LAN Controllers MS-DOS (operating); � accessed via two RJ45 front panel connectors 5Hz-2000Hz at 5g, 0.76mm peak displacement � programmable station ID VME Interface (non-operating) � implemented using Tundra® Universe II™ PMC Interfaces device � 2 x PMC sites and for both sites:- selected variants are supplied with � VME Master/Slave VME64x handles � I/O via front panel, also via P2 for site 1 � A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64 and optionally via P0 for site 2 � fast hardware byte swapping 5-row backplane is required to provide � 32/64-bit, 33/66 MHz PCI operation � auto system controller detect access to EIDE, floppy disk and USB interfaces � 3.3V or 5V signaling levels � full interrupter / interrupt handler support � expansion connector to an optional PMC � bus error interrupt hardware carrier board for two additional PMC sites Electrical Specification Serial Interface � +5V@6A (typical at 800 MHz with 1 Gbyte � 1 x RS232 serial channel DRAM) � 16550 compatible UART � +12V@0.0A; -12V@0.0A � accessed via an RJ45 on the front panel � +12V and -12V routed to both PMC sites and Battery Backed SRAM PMC expansion connector � 512 Kbytes of battery backed low power SRAM Environmental Specification Flash EPROM � operating temperatures:- � 64 Mbytes Application Flash EPROM � 0°C to +55°C (N-Series: 933MHz, 800MHz) � 512 Kbytes of BIOS Flash EPROM � -25°C to +70°C (E-Series: 800MHz) � -40°C to +85°C (K-Series: 800MHz) Firmware Support � 10% to 90% Relative Humidity, non � PhoenixPICO™ BIOS condensing (operating):- � comprehensive Power-On Self-Test (POST) � K-Series includes humidity sealant � -40°C to +70°C (storage) � 10% to 90% Relative Humidity, non condensing (storage) ORDERING INFORMATION VP 110/010-xy 800 MHz Pentium III processor - Low Power Where x = P2/P0 Breakout combinations Where y = VP 110/011-xy 933 MHz Pentium III processor - Low Power 1 - 3-row, PMC1 I/O 0 - 256 Mbytes AD 200/001-z0 CompactFlash/MicroDrive Carrier 2 - 5-row, P0, PMC1 I/O, PMC2 I/O, 1 x USB, Floppy, EIDE 1 - 512 Mbytes AD CP1/DR1-z0 2.5 inch Disk Drive Assembly 3 - 5-row, PMC1 I/O, 1 x USB, Floppy, EIDE 2 - Reserved AD CR2/PMC-zz 32-bit PMC Carrier Board for 2 PMC modules 3 - 1 Gbyte DS MSS/00x-zz Board with HDD, CD-RW/DVD, CompactFlash, Floppy DS MSS/IFP-zz Board with HDD, CD, Floppy CB KYB/122-10 Optional Keyboard/Mouse Cable For extended temperature, E-Series, K-Series, please contact your local sales office For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1421/0305 Specification subject to change; E and OE. © Concurrent Technologies 2005 PMC Module PMC Module 64-bit PCI Bus
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the VP 110/01x have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods