CONCURRENT TECHNOLOGIES PP 432/05x
Specifications
-40°C to +85°C (storage)
Environmental Specification
1.5 GHz Intel Core 2 Duo processor L7400
uses FC-BGA 478 (micro Flip-Chip Ball Grid Array) package
10% to 90% Relative Humidity, non-condensing (operating)
Environmental Specification
10% to 90% Relative Humidity, non-condensing (storage)
Environmental Specification
2 x rear interfaces implemented by Intel 82546GB controller
support for PICMG 2.16 R1.0 - Packet Switching Backplane (PSB) optional support for rear panel RJ45’s via J3
2.16 GHz Intel Core 2 Duo processor
uses FC-PGA 478 (micro Flip-Chip Pin Grid Array) package
4 x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T 2 x front panel
support for PICMG 2.16 R1.0 - Packet Switching Backplane (PSB) optional support for rear panel RJ45’s via J3
4 x SATA-150 interfaces
2 channels accessible via J5 optional 2.5 inch SATA hard disk drive assemblies in a single slot (uses PMC site) support for CompactFlash site under PMC site via SATA to PATA convertor
6U Form-Factor
9.2inches x 6.3inches (233mm x 160mm)
Connectors
IEC-1076-4-101 for J1-J
Ethernet
2 x front panel interfaces implemented by two Intel 82573L, accessed via fr
operating temperature
0°C to +55°C (N-Series) -25°C to +70°C (E-Series: 1.5 GHz)
Shock
20g, 11ms, ½ sine (operating); 30g, 11ms, ½ sine (non-operating)
Single-slot
0.8inches (20.3mm)
supports up to 4 Gbytes DDR2-400 ECC SDRAM
up to 4 Gbytes via two SODIMM sockets
utilizes Intel 3100 server class chipset
single chip combining memory and I/O controllers
vibration: 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating); 5Hz-2000
Mechanical Specification
Features
- 2 x PMC module interfaces, with front and rear user I/O:
- 2 x RS232 serial channel interfaces; either:
- 2.16 GHz or 1.5 GHz Intel Core Duo processor:
- 4 x 10/100/1000Mbps Ethernet interfaces:
- 4 x Serial ATA150 (SATA) channels, with options for:
- 4 x Universal Serial Bus (USB 2.0) interfaces:
- CompactPCI controller:
- Extended temperature version available:
- IPMI (Intelligent Platform Management Interface)
- Option to bypass CompactPCI bus (Satellite Mode)
- Optional Rear Transition Modules
- PICMG 2.9 (System Management Specification)
- Single slot (for all option combinations)
- Support for Linux, Windows 2000, Windows XP,
- Up to 4 Gbytes of single channel DDR2-400 ECC SDRAM
- Watchdog timer and Long Duration Timer
- -25°C to +70°C (E-Series)
- 1 via on-board header and 1 via rear I/O
- 2 via front panel
- 2 x XMC module interfaces (x1 PCI Express)
- 32-bit, 33MHz PCI and 32/64-bit, 33/66/100MHz
- 32/64-bit at 33/66 MHz CompactPCI interface
- 4 Mbytes L2 cache shared between cores
- 64 Kbytes L1 cache per core
- 667 MHz Front Side Bus
- Dual Gigabit Packet Switching Backplane (PICMG 2.16)
- dual-core processor
- Intel 64 Technology (64-bit computing support)
- Module
- no CPU fan needed; low power processor
- on-board CompactFlash or Hitachi GST MicroDrive
- on-board options fit in a single slot
- on-board SATA disk drive
- operates in system slot or peripheral slot
- or 2 via optional AD PP5/001-40U Rear Transition
- PCI/PCI-X
- supporting 1.5 GHz processor
- up to 2 via rear I/O
- VxWorks and Solaris
- Windows XP Embedded, Windows Server 2003, QNX,
Datasheet

Concurrent-Technologies-PP-432-05x-Intel-Core-2-Duo-Processor-CPU-Board-datasheet1-1502125265.pdf
122 KiB
Extracted Text
Intel® Core™ 2 Duo Processor Dual PMC Carrier RoHS 2002/95/EC APPLICATIONS The PP 432/05x is a PC-compatible high performance, PICMG® 2.16 specification. Full system monitoring is high functionality, dual PMC CompactPCI® board provided by the PICMG 2.9 compliant IPMI interface. supporting the Intel® Core™ 2 Duo processor and the Many suitable industry standard operating systems are Intel® 3100 server class chipset. The processor contains supported. The PP 432/05x provides an upgrade for two CPU cores and a shared L2 cache. The PP 432/05x most applications that are using the popular will operate in a system slot, a peripheral slot or PP 332/02x and PP 330/02x boards. The PP 432/05x is independently from the CompactPCI bus. High suitable for a range of high performance applications performance networking is provided by four Gigabit within the industrial control, telecomms, telemetry, Ethernet links, and the board is compliant to the scientific and aerospace markets. HIGHLIGHTS � 2.16 GHz or 1.5 GHz Intel Core Duo processor: � 2 x RS232 serial channel interfaces; either: dual-core processor 1 via on-board header and 1 via rear I/O - - 667 MHz Front Side Bus or 2 via optional AD PP5/001-40U Rear Transition - - Module 64 Kbytes L1 cache per core - � CompactPCI controller: 4 Mbytes L2 cache shared between cores - Intel® 64 Technology (64-bit computing support) operates in system slot or peripheral slot - - no CPU fan needed; low power processor 32/64-bit at 33/66 MHz CompactPCI interface - - � Up to 4 Gbytes of single channel DDR2-400 ECC SDRAM � Option to bypass CompactPCI bus (Satellite Mode) � IPMI (Intelligent Platform Management Interface) � 2 x PMC module interfaces, with front and rear user I/O: 32-bit, 33MHz PCI and 32/64-bit, 33/66/100MHz - � PICMG 2.9 (System Management Specification) PCI/PCI-X � Watchdog timer and Long Duration Timer 2 x XMC module interfaces (x1 PCI Express®) - � Support for Linux®, Windows® 2000, Windows® XP, � 4 x Serial ATA150 (SATA) channels, with options for: Windows® XP Embedded, Windows® Server 2003, QNX®, on-board SATA disk drive - VxWorks® and Solaris™ on-board CompactFlash™ or Hitachi GST MicroDrive™ - on-board options fit in a single slot - � Single slot (for all option combinations) � 4 x 10/100/1000Mbps Ethernet interfaces: � Extended temperature version available: Dual Gigabit Packet Switching Backplane (PICMG 2.16) - -25°C to +70°C (E-Series) - � 4 x Universal Serial Bus (USB 2.0) interfaces: supporting 1.5 GHz processor - 2 via front panel - � Optional Rear Transition Modules up to 2 via rear I/O - 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 6 Tower Office Park, Woburn, MA 01801, USA TECHNOLOGIES Tel: (781) 933 5900 Fax: (781) 933 5911 PCI-X 100 PCI-X 133 Central Processor 2x 2 x Ethernet PMC PMC USB 10/100/1000Mbps Site 2 Site 1 � 2.16 GHz Intel® Core™ 2 Duo processor T7400:- BIOS 1 x Serial Real-Time Intel Intel � uses �FC-PGA 478 (micro Flip-Chip Pin Grid 3V Flash Interface Clock 82573L 82573L EPROM Array) package � 1.5 GHz Intel® Core™ 2 Duo processor L7400:- x1 x1 � uses �FC-BGA 478 (micro Flip-Chip Ball Grid 4x DDR2 x1 x1 USB 2.0 CF SDRAM TM Array) package Intel SATA150 � common processor features are:- 3100 x4 � dual-core CPU SATA to Core 2 Duo EIDE Processor PCI-E to PCI-E to Convertor � 4 Mbytes of secondary (L2) on-die cache PCI-X PCI-X x4 Bridge Bridge � 667 MHz Front Side Bus � 64 Kbytes of primary (L1) on-die cache 4x Low Pin 1 x Serial Intel PCI SATA150 IPMI Count � Intel® 64 (or Intel® EM64T) 64-bit Interface 82546GB Bridge Interface Interface computing support � no CPU fan; low power processor � utilizes Intel® 3100 server class chipset:- 2x 1x IPMB0 IPMB1 2x PMC CompactPCI USB RS232 2x Ethernet (PSB) Rear I/O � Printer RS232 10/100/ 2x 1000Mbps SATA Transition Module � single chip combining memory and I/O = Onboard Header = PCI Express controllers � provision for XDP debug port Serial Interfaces CompactPCI Interface DRAM � 2 x RS232 Tx/Rx serial channels; either:- � compliant with PICMG 2.0 R3.0; 3.3V or 5V � supports up to 4 Gbytes DDR2-400 ECC � 1 accessed via on-board header and 1 via J5 signaling levels (universal signaling support) SDRAM:- � or 2 via LPC (Low Pin Count) bus on J5 to � 33/66 MHz, 32/64-bit interface accessed via � up to 4 Gbytes via two SODIMM sockets J1/J2 connectors optional AD PP5/001-40U Rear Transition � single bit error correction Module � PCI-X to PCI bridge for off-board accesses � supports single channel memory to give a � 16550 compatible UARTs � J4 connector not fitted peak bandwidth of 3.2 Gbytes/s � rear panel supports CTS, RTS � PICMG 2.1 R2.0 Hot Swap compliant � accessible from processor or CompactPCI bus � operates as a System Slot controller or in a Other Peripheral Interfaces Peripheral slot Hard Disk Interfaces � PC Real Time Clock (Year 2000 compliant) � option to disable CompactPCI interface � 4 x SATA-150 interfaces:- � watchdog timer (Satellite Mode):- � 2 channels accessible via J5 � 1 x 32-bit Long Duration Timer with processor � receives power from CompactPCI bus � optional 2.5 inch SATA hard disk drive interrupt capability assemblies in a single slot (uses PMC site) � board can be hot swapped � system fan monitor; CPU temperature monitor; � support for CompactFlash™ site under PMC voltages monitor:- Electrical Specification site via SATA to PATA convertor � accessible via IPMI � typical at 2.16 GHz with 1 Gbyte DRAM Ethernet Interfaces � 4 x USB 2.0 interfaces:- � +5V@6.8A; +5% / -3% � 4 x channels supporting 10 Base-T, 100 � 2 via front panel � +3.3V@3.7A; +5% / -3% Base-TX, 1000 Base-T � 2 via J5 � +12V@0.05A; -12V@0.05A � 2 x front panel interfaces implemented by two � independent legacy speaker output via J3 � +12V and -12V routed to PMC slots Intel® 82573L, accessed via front panel RJ45's � LPC (Low Pin Count) bus via J5 to enable the Safety � 2 x rear interfaces implemented by AD PP5/001 Transition Module support for:- � PCB (PWB) manufactured with flammability Intel® 82546GB controller:- � floppy disk interface rating of 94V-0 � support for PICMG 2.16 R1.0 - Packet � parallel port interface (ECP, EPP, IEEE1284) Switching Backplane (PSB) � 2 x RS232 serial channels Environmental Specification � optional support for rear panel RJ45’s via J3 � operating temperature:- Flash EPROM � 0°C to +55°C (N-Series) PMC Interfaces � 1 Mbyte of BIOS Flash EPROM - 8-bits wide � -25°C to +70°C (E-Series: 1.5 GHz) � 2 x PMC sites Firmware Support � 10% to 90% Relative Humidity, � for PMC site 1:- non-condensing (operating) � Phoenix® TrustedCore™ Server BIOS � 32-bit, 33 MHz PCI operation � -40°C to +85°C (storage) � comprehensive Power-On Self-Test (POST) � 3.3V or 5V PCI signaling levels � 10% to 90% Relative Humidity, � LAN boot firmware included � I/O via front panel and via J5 non-condensing (storage) � for PMC site 2:- Software Support � Mechanical Specification � support for Linux®, Windows® XP, Windows® 2000, Windows® XP Embedded, Windows® � 6U form-factor: 9.2inches x 6.3inches (233mm � 3.3V PCI signaling level Server 2003, QNX® VxWorks® and Solaris™ x 160mm) � I/O via front panel and via J3 � single-slot: 0.8inches (20.3mm) IPMI � common features for both PMC sites:- � connectors: IEC-1076-4-101 for J1-J5 � PICMG 2.9 R1.0 (System Management � XMC (PCI Express® Mezzanine Card) � shock: 20g, 11ms, ½ sine (operating); Specification):- interface supported via x1 PCI Express Link 30g, 11ms, ½ sine (non-operating) � implements the IPMB0 interface � I/O via front panel and via J3/J5 � vibration: 5Hz-2000Hz at 2g, 0.38mm peak � implements an IPMB1 interface � Transition Modules support rear I/O displacement (operating); � on-board Baseboard Management Controller 5Hz-2000Hz at 5g, 0.76mm peak displacement � supports 8 Kbytes of non-volatile memory (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 432/051-xy 1.5 GHz Core 2 Duo processor L7400 ere x = where y = memory size 432/052-xy 2.16 GHz Core 2 Duo processor T7400 1 - Ethernet via rear panel 1 - reserved 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD PP5/001-40U RTM I/O: dual PMC, Ethernet, floppy, printer, 1 x USB, 2 x RS232 3 - reserved AD PP5/002-00 RTM I/O: dual PMC, Ethernet, SATA, 2 x USB, 1 x RS232 4 - 2 Gbytes AD PP5/003-00 RTM I/O: dual PMC PIM, Ethernet, SATA, 2 x USB, 1 x RS232 5 - 4 Gbytes AD 110/002-z1 2.5 inch SATA Hard Disk Drive assembly For z options please contact your local sales office. For extended temperature, E-Series, please contact your local sales office. All companies and product names are trademarks of their respective organizations. Datasheet Code 1552/0508 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2008 32-bit PCI Bus XMC PMC Module XMC PMC Module
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PP 432/05x have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Concurrent Technologies PP 200 Series Compact PCI Intel Pentium 4 Processor M Single Board Computers

Concurrent Technologies PP 200/011-11 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

Concurrent Technologies PP 200/011-12 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

Concurrent Technologies PP 200/011-13 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods