Intel® Pentium® M Processor Slot Controller RoHS 2002/95/EC APPLICATIONS The PP 302/02x-U is a PC-compatible high performance, can be further increased through the use of PMC high functionality one-slot CompactPCI® single board modules. It is fully compliant with PICMG® 2.16 (Packet computer supporting either the 1.8 GHz Intel® Pentium® Switching Backplane) specification. Additionally, very M processor 745 or the 1.4 GHz Intel® Pentium® M high-performance networking is provided by four Gigabit processor Low Voltage 738. Featuring a selection of Ethernet links. To simplify the board’s integration many memory options, an optional on-board hard disk drive or popular industry standard operating systems are CompactFlash™ drive and a variety of interfaces, the supported. Full system monitoring is provided by the board is suitable for a range of high-performance PICMG 2.9 compliant IPMI interface. The PP 302/02x-U applications in industrial control, telecomms, telemetry, is the RoHS compliant version of the PP 302/02x family. scientific and aerospace applications. Its functionality HIGHLIGHTS � 1.8 GHz or 1.4 GHz Intel Pentium M processor: � CompactPCI controller: - 64 Kbytes L1 cache - operates in system slot or peripheral slot - 2 Mbytes L2 cache - 32/64-bit at 33/66 MHz CompactPCI interface - no CPU fan needed; low power processor � Option to bypass CompactPCI bus (Satellite Mode) � 1.6 GHz processor version (1 Mbyte L2 cache) available; � IPMI (Intelligent Platform Management Interface): see PP 300/02x-U datasheet - PICMG 2.9 (System Management Specification) � Single slot (for all option combinations) � High resolution graphics interface � Up to 2 Gbytes of 333 MHz DDR DRAM (with ECC) � PS/2 keyboard and mouse port � High performance EIDE interfaces with optional on-board � 3 x USB 2.0 interfaces and 2 x RS232 serial channels disk drive or CompactFlash™/Microdrive™ interface (in a � Floppy disk interface; Watchdog timer single-slot) � Extended temperature version available: � Two Serial ATA150 (SATA) channels - -25°C to +70°C (E-Series) � Ultra-320 Wide SCSI interface - -40°C to +85°C (K-Series, includes humidity sealant) - supporting 1.4 GHz processor � Four 10/100/1000Mbps Ethernet interfaces � Support for VxWorks®, Linux®, Windows NT®, � Dual Gigabit Packet Switching Backplane (PICMG 2.16) Windows® 2000, Windows® XP, Windows® XP Embedded, � PMC module interface (32/64-bit at 33/66 MHz) Solaris™, LynxOS® and QNX® � 1 Mbyte of BIOS Flash EPROM � Optional Transition Module for rear panel I/O 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Graphics 2 x Ethernet PMC � Two processor versions available 1xUSB 2 x RS232 Interface 10/100/1000Mbps Interface � 1.8 GHz Intel® Pentium® M processor 745:- � uses �FC-PGA 478 BIOS Keyboard/ 2xIntel 3x 2 x Serial (micro Flip-Chip Pin Grid Array) package Flash Mouse Graphics USB 2.0 Interfaces 82541PI EPROM Interface � 1.4 GHz Intel® Pentium® M processor Low Voltage 738:- 32-bit PCI Bus 6300ESB Real-Time � uses �FC-BGA 479 3V ICH Clock CF (micro Flip-Chip Ball Grid Array) package TM Pentium M � Common processor features are:- Processor � 64 Kbytes of primary (L1) on-die cache Intel IPMI 855GME CF Soldered or � 2 Mbytes of secondary (L2) on-die cache TM DDR SODIMM � 400 MHz Front Side Bus (FSB) � no CPU fan Floppy � 1.6 GHz processor version (1 Mbyte L2 cache) SATA EIDE LSI PCI Disk Graphics 82546GB Interface Interface 53C1020 Bridge Interface available; see PP 300/02x-U datasheet � utilizes 64-bit Intel® 855GME chipset:- � supports 400 MHz bus frequency � uses Intel® 6300ESB I/O Controller Hub 2x IPMB0 EIDE KBD/ 2x DVI-D 2 x Ethernet CompactPCI USB IPMB1 Mouse RS232 DVI-A (PSB) 10/100/ 1000Mbps Ultra 320 2 x SATA150 SCSI DRAM � supporting up to 2 Gbytes 333 MHz DDR ECC � option to disable CompactPCI interface SDRAM:- Software Support (Satellite Mode):- � 1 Gbyte soldered onboard � support for VxWorks, Linux, Windows NT, � receives power from CompactPCI bus � up to 1 Gbyte provided via a SODIMM socket Windows XP Embedded, Windows 2000, board can be hot swapped in this mode � � single bit error correction Windows XP, Solaris, LynxOS and QNX J4 connector not fitted � � accessible from Pentium or CompactPCI bus Graphics Interface IPMI Interface Hard Disk Interfaces � implemented by the Intel® 855GME GMCH:- � PICMG 2.9 R1.0 (System Management � EIDE interface:- � resolutions up to 2048 x 1536 @75Hz Specification):- � supports Ultra-DMA 100 for high � up to 16M colors � implements the IPMB0 interface performance drives � accessed via a VGA connector on front panel or � implements an IPMB1 interface � two channels (primary and secondary) via J5 (DVI-A) � on-board Baseboard Management Controller � secondary channel can be used for on-board � DVI-D interface supported via J3 2.5 inch disk drive; or, support for 1x � supports 8 Kbytes of non-volatile memory (on-board socket) or 2x (using AD 200/001) Serial Interface Electrical Specification CompactFlash or Microdrive™ Type II drives � 2 x RS232 serial channels:- � +5V@4.2A (typical at 1.8 GHz with 1 Gbyte � primary channel is accessed via Transition � accessed by 2 x RJ45 connectors on front DRAM); +5% / -3% Module panel or via Transition Module � +3.3V@1.9A; +5% / -3% � Serial ATA150:- � each channel supports CTS, RTS, DSR, DTR and � +12V@0.05A; -12V@0.05A � two channels accessible via J5 DCD via front panel and Transition Module; RI � +12V and -12V routed to PMC expansion slot supported via Transition Module � transfer rate up to 150 Mbytes/s � 16550 compatible UART � Ultra-320 Wide SCSI:- Safety � accessible via Transition Module � PCB (PWB) manufactured with flammability Other Peripheral Interfaces � implemented by an LSI 53C1020 rating of 94V-0 � keyboard and mouse interfaces via a single PS/2™ type connector on front panel or via Ethernet Interfaces Environmental Specification Transition Module � four channels supporting 10 Base-T, 100 � operating temperatures:- � PC-compatible RTC (Year 2000 compliant) Base-TX, 1000Base-T:- � 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz) � floppy disk interface via Transition Module � front channels implemented by 2 x Intel® � -25°C to +70°C (E-Series: 1.4 GHz) 82541PI LAN controllers via 32-bit PCI bus � 3 x USB (Universal Serial Bus 2.0) interfaces:- � -40°C to +85°C (K-Series: 1.4 GHz) � rear channels implemented by Intel® � one via front panel � 10% to 90% Relative Humidity, non 82546GB LAN Controller via 64-bit PCI bus � two via Transition Module condensing (operating) � 2 x channels accessed via J3 and 2 x channels � watchdog timer � -40°C to +85°C (storage) via front panel RJ45 connectors � system fan monitor; CPU temperature monitor; � 10% to 90% Relative Humidity, non � support for PICMG 2.16 R1.0 - Packet Switched voltages monitor:- condensing (storage) Backplane (PSB) � all accessible via IPMI Mechanical Specification � speaker interface PMC Interface � 6U form-factor: 9.2 inches x 6.3 inches � single PMC site:- CompactPCI Interface (233mm x 160mm) � I/O via front panel � compliant with PICMG 2.0 R3.0; 3.3V or 5V � single-slot: 0.8inches (20.3mm) � 32/64-bit, 33/66 MHz PCI operation signaling levels:- � connectors: IEC-1076-4-101 for J1-J5 � 3.3V PCI signaling levels � universal signaling support � shock: � 33/66 MHz; 32/64-bit interface accessed via 20g, 11ms, ½ sine (operating); Flash EPROM J1/J2 connectors 30g, 11ms, ½ sine (non-operating) � 1 Mbyte of BIOS Flash EPROM - 8-bits wide � utilizes a PCI-PCI bridge for off-board accesses � vibration: Firmware Support � PICMG 2.1 R2.0 Hot Swap Specification 5Hz-2000Hz at 2g, 0.38mm peak displacement � Phoenix BIOS™ � operates as a System Slot controller or in a (operating); � comprehensive Power-On Self-Test (POST) Peripheral Slot 5Hz-2000Hz at 5g, 0.76mm peak displacement � LAN boot firmware included (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 302/020-xyU 1.4 GHz Pentium M processor Low Voltage 738 where x = where y = PP 302/021-xyU 1.8 GHz Pentium M processor 745 1 - Ethernet via rear panel 1 - reserved 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD PP4/00z-zzU Transition Module 3 - 1.5 Gbytes AD 200/001-01 CompactFlash/Microdrive carrier assembly 4 - 2 Gbytes AD CP1/DR1-z2 2.5 inch Disk Drive assembly AD HSC/001-04 Board Hot Swap cover (rear mounting) For z options please contact your local sales office For extended temperature, 1.4 GHz E or K-Series, please contact your local sales office All companies and product names are trademarks of their respective organizations Datasheet Code 1510/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 PMC Module 64-bit PCI Bus