Elite.Parts chervon right Manufacturers chervon right C chervon right CONCURRENT TECHNOLOGIES chervon right PP 300/02x
About product Datasheet FAQ

CONCURRENT TECHNOLOGIES PP 300/02x

Image of CONCURRENT TECHNOLOGIES PP 300/02x

Description

Concurrent Technologies PP 300/02x CompactPCI Intel Pentium M Processor Slot Controller CPU Board

Part Number

PP 300/02x

Price

Request Quote

Manufacturer

CONCURRENT TECHNOLOGIES

Lead Time

Request Quote

Category

PRODUCTS - P

Datasheet

pdf file

pp30002x-u-706776056.pdf

98 KiB

Extracted Text

Intel® Pentium® M Processor Slot Controller RoHS 2002/95/EC APPLICATIONS The PP 300/02x-U is a PC-compatible high performance, through the use of PMC modules. It is fully compliant high functionality one-slot CompactPCI® single board with PICMG® 2.16 (Packet Switching Backplane) computer supporting the 1.6 GHz Intel® Pentium® M specification. Additionally, very high-performance processor. Featuring a selection of memory options, an networking is provided by four Gigabit Ethernet links. To optional on-board hard disk drive or CompactFlash™ simplify the board’s integration many popular industry drive and a variety of interfaces, the board is suitable for standard operating systems are supported. Full system a range of high-performance applications in industrial monitoring is provided by the PICMG 2.9 compliant IPMI control, telecomms, telemetry, scientific and aerospace interface. The PP 300/02x-U is the RoHS compliant applications. Its functionality can be further increased version of the PP 300/02x family. HIGHLIGHTS � 1.6 GHz Intel Pentium M processor: � 1 Mbyte of BIOS Flash EPROM - 64 Kbytes L1 cache � CompactPCI controller: - 1 Mbyte L2 cache - operates in system slot or peripheral slot - no CPU fan needed; low power processor - 32/64-bit at 33/66 MHz CompactPCI interface � 1.8 GHz or 1.4 GHz processor version (2 Mbytes L2 cache) � Option to bypass CompactPCI bus (Satellite Mode) available; see PP 302/02x-U datasheet � IPMI (Intelligent Platform Management Interface): � Single slot (for all option combinations) - PICMG 2.9 (System Management Specification) � Up to 2 Gbytes of 333 MHz DDR DRAM (with ECC) � High resolution graphics interface � High performance EIDE interfaces with optional on-board � PS/2 keyboard and mouse port disk drive or CompactFlash™/Microdrive™ interface (in a � 3 x USB 2.0 interfaces and 2 x RS232 serial channels single-slot) � Floppy disk interface � Two Serial ATA150 (SATA) channels � Watchdog timer � Ultra-320 Wide SCSI interface � Support for VxWorks®, Linux®, Windows NT®, � Four 10/100/1000Mbps Ethernet interfaces Windows® 2000, Windows® XP, Windows® XP Embedded, � Dual Gigabit Packet Switching Backplane (PICMG 2.16) Solaris™, LynxOS® and QNX® � PMC module interface (32/64-bit at 33/66 MHz) � Optional Transition Module for rear panel I/O 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor Graphics 2 x Ethernet PMC � 1.6 GHz Intel® Pentium® M processor:- 1xUSB 2 x RS232 Interface 10/100/1000Mbps Interface � uses �FC-PGA 478 (micro Flip-Chip Pin Grid Array) package BIOS Keyboard/ 2xIntel 3x 2 x Serial � 64 Kbytes of primary (L1) on-die cache Flash Mouse Graphics USB 2.0 Interfaces 82541PI EPROM Interface � 1 Mbyte of secondary (L2) on-die cache � 400 MHz Front Side Bus (FSB) 32-bit PCI Bus 6300ESB � no CPU fan Real-Time 3V ICH Clock CF � 1.8 GHz or 1.4 GHz processor versions TM Pentium M available; see PP 302/02x-U datasheet Processor � utilizes 64-bit Intel® 855GME chipset:- Intel IPMI 855GME CF Soldered � supports 400 MHz bus frequency or TM DDR SODIMM � uses Intel® 6300ESB I/O Controller Hub DRAM Floppy SATA EIDE LSI PCI Disk Graphics 82546GB � supporting up to 2 Gbytes 333 MHz DDR ECC Interface Interface 53C1020 Bridge Interface SDRAM:- � 1 Gbyte soldered onboard � up to 1 Gbyte provided via a SODIMM socket 2x IPMB0 EIDE KBD/ 2x DVI-D 2 x Ethernet CompactPCI � single bit error correction USB IPMB1 Mouse RS232 DVI-A (PSB) 10/100/ 1000Mbps Ultra 320 2 x SATA150 SCSI � accessible from Pentium or CompactPCI bus Hard Disk Interfaces � option to disable CompactPCI interface Software Support � EIDE interface:- (Satellite Mode):- � support for VxWorks, Linux, Windows NT, � supports Ultra-DMA 100 for high � receives power from CompactPCI bus Windows XP Embedded, Windows 2000, performance drives board can be hot swapped in this mode � Windows XP, Solaris, LynxOS and QNX � two channels (primary and secondary) J4 connector not fitted � � secondary channel can be used for on-board Graphics Interface 2.5 inch disk drive or, support for 1x IPMI Interface � implemented by the Intel® 855GME GMCH:- (on-board socket) or 2x (using AD 200/001) � PICMG 2.9 R1.0 (System Management � resolutions up to 2048 x 1536 @75Hz CompactFlash or Microdrive™ Type II drives Specification):- � up to 16M colors � primary channel is accessible via Transition � implements the IPMB0 interface � accessed via a VGA connector on front panel or Module � implements an IPMB1 interface via J5 (DVI-A) � Serial ATA150:- � on-board Baseboard Management Controller � DVI-D interface supported via J3 � two channels accessible via J5 � supports 8 Kbytes of non-volatile memory � transfer rate up to 150 Mbytes/s Serial Interface Electrical Specification � Ultra-320 Wide SCSI:- � 2 x RS232 serial channels:- � +5V@4.1A (typical with 1 Gbyte DRAM); � accessible via Transition Module � accessed by 2 x RJ45 connectors on front +5% / -3% � implemented by an LSI 53C1020 panel or via Transition Module � +3.3V@1.9A; +5% / -3% � each channel supports CTS, RTS, DSR, DTR and Ethernet Interfaces � +12V@0.05A; -12V@0.05A DCD via front panel and Transition Module; RI � four channels supporting 10 Base-T, 100 � +12V and -12V routed to PMC expansion slot supported via Transition Module Base-TX, 1000Base-T:- � 16550 compatible UART Safety � front channels implemented by 2 x Intel® 82541PI LAN controllers via 32-bit PCI bus � PCB (PWB) manufactured with flammability Other Peripheral Interfaces rating of 94V-0 � rear channels implemented by Intel® � keyboard and mouse interfaces via a single 82546GB LAN Controller via 64-bit PCI bus PS/2™ type connector on front panel or via Environmental Specification � 2 x channels accessed via J3 and 2 x channels Transition Module � operating temperatures:- via front panel RJ45 connectors:- � PC-compatible RTC (Year 2000 compliant) � 0°C to +55°C (N-Series) � support for rear panel RJ45 connectors via � floppy disk interface via Transition Module � 10% to 90% Relative Humidity, non Transition Module � 3 x USB (Universal Serial Bus 2.0) interfaces:- condensing (operating) � support for PICMG 2.16 R1.0 - Packet Switched � one via front panel � -40°C to +85°C (storage) Backplane (PSB) � two via Transition Module � 10% to 90% Relative Humidity, non � watchdog timer PMC Interface condensing (storage) � system fan monitor; CPU temperature monitor; � single PMC site:- Mechanical Specification voltages monitor:- � I/O via front panel � 6U form-factor: 9.2 inches x 6.3 inches � all accessible via IPMI � 32/64-bit, 33/66 MHz PCI operation (233mm x 160mm) � speaker interface � 3.3V PCI signaling levels � single-slot: 0.8inches (20.3mm) CompactPCI Interface Flash EPROM � connectors: IEC-1076-4-101 for J1-J5 � compliant with PICMG 2.0 R3.0; 3.3V or 5V � 1 Mbyte of BIOS Flash EPROM - 8-bits wide � shock: signaling levels:- 20g, 11ms, ½ sine (operating); Firmware Support � universal signaling support 30g, 11ms, ½ sine (non-operating) � Phoenix BIOS™ � 33/66 MHz; 32/64-bit interface accessed via � vibration: � comprehensive Power-On Self-Test (POST) J1/J2 connectors 5Hz-2000Hz at 2g, 0.38mm peak displacement � LAN boot firmware included � utilizes a PCI-PCI bridge for off-board accesses (operating); 5Hz-2000Hz at 5g, 0.76mm peak displacement � PICMG 2.1 R2.0 Hot Swap Specification (non-operating) � operates as a System Slot controller or in a Peripheral Slot ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 300/022-xyU 1.6 GHz Pentium M Processor where x = where y = 1 - Ethernet via rear panel 1 - reserved AD PP4/00z-zzU Transition Module 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD 200/001-01 CompactFlash/Microdrive carrier assembly 3 - 1.5 Gbytes AD CP1/DR1-z2 2.5 inch Disk Drive assembly 4 - 2 Gbytes AD HSC/001-04 Board Hot Swap cover (rear mounting) For z options please contact your local sales office: All companies and product names are trademarks of their respective organizations Datasheet Code 1509/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 PMC Module 64-bit PCI Bus

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the PP 300/02x have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Concurrent Technologies PP 200 Series Compact PCI Intel Pentium 4 Processor M Single Board Computers

product

Concurrent Technologies PP 200/011-11 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

product

Concurrent Technologies PP 200/011-12 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

product

Concurrent Technologies PP 200/011-13 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

product

Concurrent Technologies PP 200/011-14 CompactPCI 1.7 GHz Pentium 4 Processor-M Single Board Computer...

product

Concurrent Technologies PP 302/02x-U Intel Pentium M Processor Slot Controller CPU Board