Intel® Pentium® M Processor Intelligent Dual PMC Carrier RoHS 2002/95/EC APPLICATIONS The PP 332/02x-U is an entry-level PC-compatible, low monitoring is provided by the PICMG 2.9 compliant IPMI power, high functionality, dual PMC CompactPCI® board. interface. To simplify the board’s integration many Supporting either the 1.8 GHz Intel® Pentium® M popular industry standard operating systems are processor 745 or the 1.4 GHz Intel® Pentium® M supported. The PP 332/02x-U is suitable for a range of processor Low Voltage 738, the PP 332/02x-U will applications within the industrial control, telecomms, operate in a system slot or independently from the telemetry, scientific and aerospace markets. The CompactPCI bus. High-performance networking is PP 332/02x-U is the RoHS compliant version of the provided by four Gigabit Ethernet links, and the board is PP 332/02x family. compliant to the PICMG® 2.16 specification. Full system HIGHLIGHTS � 1.8 GHz or 1.4 GHz Intel Pentium M processor: � Option to bypass CompactPCI bus (Satellite Mode) - 64 Kbytes L1 cache � IPMI (Intelligent Platform Management Interface): - 2 Mbytes L2 cache - PICMG 2.9 (System Management Specification) - no CPU fan needed; low power processor � 3 x USB 2.0 interfaces: � 1.6 GHz processor version (1 Mbyte L2 cache) available; - 2 via front panel see PP 330/02x-U datasheet - 1 via rear panel � Single slot (for all option combinations) � Up to 3 x RS232 serial channel interfaces: - 1 on-board � Up to 2 Gbytes of 333 MHz DDR DRAM (with ECC) - 2 on optional Transition Module � 2 x PMC module interfaces (32/64-bit at 33/66 MHz) � Watchdog timer � High performance EIDE interfaces with optional on-board � Extended temperature version available: disk drive or optional CompactFlash™/Microdrive™ - -25°C to +70°C (E-Series) interface (in a single-slot) - -40°C to +85°C (K-Series, includes humidity sealant) � 4 x 10/100/1000Mbps Ethernet interfaces: - supporting 1.4 GHz processor - 2 via front panel � Support for VxWorks®, Windows® 2000, Windows® XP, - 2 via rear panel Windows® XP Embedded, QNX® and Linux® � Dual Gigabit Packet Switched Backplane (PICMG 2.16) � Optional Transition Module for rear panel I/O: � CompactPCI controller: - 2 x RS232 channels, parallel printer port and floppy - operates in system slot or peripheral slot disk interfaces included - 64-bit at 33/66 MHz CompactPCI interface 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 64-bit PCI Bus Central Processor 2 x Ethernet PMC PMC 2xUSB 10/100/1000Mbps Interface Interface � Two processor versions available � 1.8 GHz Intel® Pentium® M processor 745:- Intel Intel � uses �FC-PGA 478 USB 82541PI 82541PI (micro Flip-Chip Pin Grid Array) package 1 x Serial � 1.4 GHz Intel® Pentium® M processor Low Interface BIOS Voltage 738:- Flash EPROM Bridge � uses �FC-BGA 479 CF TM (micro Flip-Chip Ball Grid Array) package 3V � Common processor features are:- Intel Real-Time 855GME � 64 Kbytes of primary (L1) on-die cache Clock Pentium M CF Processor or TM � 2 Mbytes of secondary (L2) on-die cache � 400 MHz Front Side Bus (FSB) Low Pin PCI � no CPU fan EIDE DDR Intel USB IPMI Count Bridge Interface SDRAM 82546GB Interface � 1.6 GHz processor version (1 Mbyte L2 cache) available; see PP 330/02x-U datasheet � utilizes 64-bit Intel® 855GME chipset:- � supports 400 MHz bus frequency 1xUSB IPMB0 IPMB1 PMC 2x CompactPCI � uses Intel® 6300ESB I/O Controller Hub 2x Rear I/O Ethernet Printer RS232 (PSB) EIDE = Onboard Header 10/100/1000Mbps � provision for ITP debug port Transition Module DRAM � option to disable CompactPCI interface � supporting up to 2 Gbytes 333 MHz DDR ECC Firmware Support (Satellite Mode):- SDRAM:- � Phoenix™ BIOS � receives power from CompactPCI bus � up to 2 Gbytes provided via two SODIMM � comprehensive Power-On Self-Test (POST) � board can be hot swapped in this mode sockets � LAN boot firmware included � single bit error correction IPMI Software Support � accessible from Intel Pentium M processor or � PICMG 2.9 R1.0 (System Management � support for Windows 2000, Windows XP, CompactPCI bus Specification):- Windows XP Embedded, VxWorks, QNX and � implements the IPMB0 interface Hard Disk Interfaces Linux � implements an IPMB1 interface � EIDE interface:- Serial Interfaces � on-board Baseboard Management Controller � supports up to Ultra-DMA 100 for high � up to 3 x RS232 serial channels:- � supports 8 Kbytes of non-volatile memory performance drives � 1 channel via an onboard header (serial � two channels (primary and secondary) Electrical Specification cable supplied) � secondary channel supports on-board � +5V@3.5A (typical at 1.8 GHz with 1 Gbyte � 2 channels via optional Transition Module CompactFlash site DRAM); +5% / -3% � 16550 compatible UARTs � secondary channel can be used for on-board � +3.3V@2.0A; +5% / -3% 2.5 inch disk drive (within a single slot); or, � supports RI, CTS, RTS, DSR, DTR and DCD � +12V@0.05A; -12V@0.05A support for 1 or 2 CompactFlash or Other Peripheral Interfaces � +12V and -12V routed to PMC slots Microdrive™ Type II drives (in a single slot) � PC-compatible Real Time Clock (Year 2000 � primary channel is accessible via Transition Safety compliant) Module � PCB (PWB) manufactured with flammability � watchdog timer � on-board options use a PMC site rating of 94V-0 � system fan monitor; CPU temperature monitor; Ethernet Interfaces voltages monitor:- Environmental Specification � 4 x channels supporting 10 Base-T, 100 � all accessible via IPMI � operating temperatures:- Base-TX, 1000 Base-T:- � legacy speaker interface � 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz) � front panel implemented by 2 x Intel® � 3 x USB (Universal Serial Bus 2.0) interfaces:- � -25°C to +70°C (E-Series: 1.4 GHz) 82541PI via 32-bit 33MHz PCI bus � 2 via front panel � -40°C to +85°C (K-Series: 1.4 GHz) � rear panel implemented by Intel® 82546GB � 1 via J5 Transition Module � 10% to 90% Relative Humidity, via 64-bit 33/66 MHz PCI bus non-condensing (operating):- � LPC (Low Pin Count) bus via J5 to enable � 2 x channels accessed via J3 and 2 x channels AD PP5/001-U Transition Module to support:- � K-Series includes humidity sealant via front panel RJ45 connectors:- � floppy disk interface � -40°C to +85°C (storage) � support for rear panel RJ45 connectors via � parallel printer port interface (ECP, EPP and � 10% to 90% Relative Humidity, Transition Module IEEE1284) non-condensing (storage) � support for PICMG 2.16 R1.0 - Packet Switched Backplane (PSB) CompactPCI Interface Mechanical Specification � compliant with PICMG 2.0 R3.0; 3.3V or 5V � 6U form-factor: 9.2 inches x 6.3 inches PMC Interfaces signaling levels:- (233mm x 160mm) � 2 x PMC sites; for both sites:- � universal signaling support � single-slot: 0.8 inches (20.3mm) � I/O via front panel � J4 connector not fitted � connectors: IEC-1076-4-101 for J1-J5 � I/O via J3 and J5 � 33/66 MHz; 32/64-bit interface accessed via � shock: � 32/64-bit, 33/66 MHz PCI operation J1/J2 connectors 20g, 11ms, ½ sine (operating); � 3.3V signaling levels � utilizing a PCI-PCI bridge for off-board 30g, 11ms, ½ sine (non-operating) � Transition Module provides rear I/O for both accesses � vibration: PMC sites � PICMG 2.1 R2.0 Hot Swap Specification 5Hz-2000Hz at 2g, 0.38mm peak displacement (operating); Flash EPROM � operates as a System Slot controller or in a 5Hz-2000Hz at 5g, 0.76mm peak displacement � 1 Mbyte of BIOS Flash EPROM Peripheral Slot (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 332/020-xyU 1.4 GHz Pentium M processor Low Voltage 738 where x = where y = PP 332/021-xyU 1.8 GHz Pentium M processor 745 1 - Ethernet via rear panel 1 - reserved 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD PP5/001-zzU Transition Module 3 - reserved AD 200/001-01 CompactFlash/Microdrive carrier assembly 4 - 2 Gbytes AD CP1/DR1-z2 2.5 inch Hard Disk Drive assembly AD HSC/001-04 Board Hot Swap cover (rear mounting) For extended temperature, 1.4 GHz E or K-Series (RoHS compliant), please contact your local sales office For z options please contact your local sales office All companies and product names are trademarks of their respective organizations. Datasheet Code 1506/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 PMC Module PMC Module