Intel® Pentium® M Processor Intelligent Dual PMC Carrier RoHS 2002/95/EC APPLICATIONS The PP 330/02x-U is an entry-level PC-compatible, low provided by the PICMG 2.9 compliant IPMI interface. To power, high functionality, dual PMC CompactPCI® board. simplify the board’s integration many popular industry Supporting the 1.6 GHz Intel® Pentium® M processor, standard operating systems are supported. The the PP 330/02x-U will operate in a system slot or PP 330/02x-U is suitable for a range of applications independently from the CompactPCI bus. within the industrial control, telecomms, telemetry, High-performance networking is provided by four scientific and aerospace markets. The PP 330/02x-U is Gigabit Ethernet links, and the board is compliant to the the RoHS compliant version of the PP 330/02x family. PICMG® 2.16 specification. Full system monitoring is HIGHLIGHTS � 1.6 GHz Intel Pentium M processor: � CompactPCI controller: - 64 Kbytes L1 cache - operates in system slot or peripheral slot - 1 Mbyte L2 cache - 64-bit at 33/66 MHz CompactPCI interface - no CPU fan needed; low power processor � Option to bypass CompactPCI bus (Satellite Mode) � 1.8 GHz or 1.4 GHz processor version (2 Mbytes L2 cache) � IPMI (Intelligent Platform Management Interface): available; see PP 332/02x-U datasheet - PICMG 2.9 (System Management Specification) � For extended temperature version see PP 332/02x-U � 3 x USB 2.0 interfaces: datasheet - 2 via front panel - 1 via rear panel � Single slot (for all option combinations) � Up to 3 x RS232 serial channel interfaces: � Up to 2 Gbytes of 333 MHz DDR DRAM (with ECC) - 1 on-board � 2 x PMC module interfaces (32/64-bit at 33/66 MHz) - 2 on optional Transition Module � High performance EIDE interfaces with optional on-board � Watchdog timer disk drive or optional CompactFlash™/Microdrive™ � Support for VxWorks®, Windows® 2000, Windows® XP, interface (in a single-slot) Windows® XP Embedded, QNX® and Linux® � 4 x 10/100/1000Mbps Ethernet interfaces: � Optional Transition Module for rear panel I/O: - 2 via front panel - 2 x RS232 channels, parallel printer port and floppy - 2 via rear panel disk interfaces included � Dual Gigabit Packet Switched Backplane (PICMG 2.16) 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 64-bit PCI Bus Central Processor 2 x Ethernet PMC PMC 2xUSB 10/100/1000Mbps Interface Interface � 1.6 GHz Intel® Pentium® M processor:- � uses �FC-PGA 478 Intel (micro Flip-Chip Pin Grid Array) package Intel USB 82541PI 82541PI � 64 Kbytes of primary (L1) on-die cache 1 x Serial � 1 Mbyte of secondary (L2) on-die cache Interface BIOS � 400 MHz Front Side Bus (FSB) Flash EPROM Bridge � no CPU fan CF TM � 1.8 GHz or 1.4 GHz processor version (2 Mbytes 3V L2 cache) available; see PP 332/02x-U Intel Real-Time 855GME datasheet Clock Pentium M CF Processor or � utilizes 64-bit Intel® 855GME chipset:- TM � supports 400 MHz bus frequency Low Pin � uses Intel® 6300ESB I/O Controller Hub PCI EIDE DDR Intel USB IPMI Count Bridge Interface SDRAM 82546GB Interface � provision for ITP debug port DRAM � supporting up to 2 Gbytes 333 MHz DDR ECC SDRAM:- 1xUSB IPMB0 IPMB1 PMC 2x CompactPCI 2x Rear I/O Ethernet � up to 2 Gbytes provided via two SODIMM Printer RS232 (PSB) EIDE = Onboard Header 10/100/1000Mbps Transition Module sockets � single bit error correction � accessible from Intel Pentium M processor or Software Support IPMI CompactPCI bus � support for Windows 2000, Windows XP, � PICMG 2.9 R1.0 (System Management Windows XP Embedded, VxWorks, QNX and Specification):- Hard Disk Interfaces Linux � implements the IPMB0 interface � EIDE interface:- � implements an IPMB1 interface � supports up to Ultra-DMA 100 for high Serial Interfaces performance drives � on-board Baseboard Management Controller � up to 3 x RS232 serial channels:- � two channels (primary and secondary) � supports 8 Kbytes of non-volatile memory � 1 channel via an onboard header (serial � secondary channel supports on-board cable supplied) Electrical Specification CompactFlash site � 2 channels via optional Transition Module � +5V@3.6A (typical with 1 Gbyte DRAM); � secondary channel can be used for on-board � 16550 compatible UARTs +5% / -3% 2.5 inch disk drive (within a single slot); or, � supports RI, CTS, RTS, DSR, DTR and DCD � +3.3V@2.1A; +5% / -3% support for 1 or 2 CompactFlash or � +12V@0.05A; -12V@0.05A Microdrive™ Type II drives (in a single slot) Other Peripheral Interfaces � +12V and -12V routed to PMC slots � primary channel is accessible via Transition � PC-compatible Real Time Clock (Year 2000 Module compliant) Safety � on-board options use a PMC site � watchdog timer � PCB (PWB) manufactured with flammability � system fan monitor; CPU temperature monitor; rating of 94V-0 Ethernet Interfaces voltages monitor:- � 4 x channels supporting 10 Base-T, 100 Environmental Specification � all accessible via IPMI Base-TX, 1000 Base-T:- � operating temperature:- � legacy speaker interface � front panel implemented by 2 x Intel® � 0°C to +55°C (N-Series) 82541PI via 32-bit 33MHz PCI bus � 3 x USB (Universal Serial Bus 2.0) interfaces:- � 10% to 90% Relative Humidity, � 2 via front panel � rear panel implemented by Intel® 82546GB non-condensing (operating):- via 64-bit 33/66 MHz PCI bus � 1 via J5 Transition Module � option for board humidity sealant � 2 x channels accessed via J3 and 2 x channels � LPC (Low Pin Count) bus via J5 to enable � -40°C to +85°C (storage) via front panel RJ45 connectors:- AD PP5/001-U Transition Module to support:- � 10% to 90% Relative Humidity, � support for rear panel RJ45 connectors via � floppy disk interface non-condensing (storage) Transition Module � parallel printer port interface (ECP, EPP and � for extended temperature operation see � support for PICMG 2.16 R1.0 - Packet Switched IEEE1284) PP 332/02x datasheet Backplane (PSB) CompactPCI Interface Mechanical Specification PMC Interfaces � compliant with PICMG 2.0 R3.0; 3.3V or 5V � 6U form-factor: 9.2 inches x 6.3 inches � 2 x PMC sites; for both sites:- signaling levels:- (233mm x 160mm) � universal signaling support � I/O via front panel � single-slot: 0.8 inches (20.3mm) � I/O via J3 and J5 � J4 connector not fitted � connectors: IEC-1076-4-101 for J1-J5 � 32/64-bit, 33/66 MHz PCI operation � 33/66 MHz; 32/64-bit interface accessed via � shock: J1/J2 connectors � 3.3V signaling levels 20g, 11ms, ½ sine (operating); � utilizing a PCI-PCI bridge for off-board � Transition Module provides rear I/O for both 30g, 11ms, ½ sine (non-operating) PMC sites accesses � vibration: � PICMG 2.1 R2.0 Hot Swap Specification Flash EPROM 5Hz-2000Hz at 2g, 0.38mm peak displacement � operates as a System Slot controller or in a � 1 Mbyte of BIOS Flash EPROM (operating); Peripheral Slot 5Hz-2000Hz at 5g, 0.76mm peak displacement Firmware Support � option to disable CompactPCI interface (non-operating) (Satellite Mode):- � Phoenix™ BIOS � receives power from CompactPCI bus � comprehensive Power-On Self-Test (POST) � board can be hot swapped in this mode � LAN boot firmware included ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: where x = where y = PP 330/022-xyU 1.6 GHz Pentium M Processor 1 - Ethernet via rear panel 1 - reserved 2 - Ethernet via PICMG 2.16 2 - 1 Gbyte AD PP5/001-zzU Transition Module 3 - reserved AD 200/001-01 CompactFlash/Microdrive carrier assembly 4 - 2 Gbytes AD CP1/DR1-z2 2.5 inch Hard Disk Drive assembly AD HSC/001-04 Board Hot Swap cover (rear mounting) For z options please contact your local sales office All companies and product names are trademarks of their respective organizations Datasheet Code 1505/0906 Specification subject to change; E and OE. RoHS 2002/95/EC compliant. © Concurrent Technologies 2006 PMC Module PMC Module