Intel® Pentium® 4 Processor M Single Board Computer APPLICATIONS The PP 200/01x is a PC-compatible high performance, applications. Its functionality can be further in- high functionality one-slot CompactPCI® single board creased through the use of PMC modules. It is fully computer. It supports the 2.2 GHz or 1.7 GHz Intel® compliant with PICMG® 2.16 (Packet Switching Pentium® 4 Processor-M and features a selection of Backplane) specification. Additionally, very high per- memory options, an on-board CompactFlash™ site, op- formance networking is provided by three Gigabit tional on-board hard disk drive or CompactFlash carrier, Ethernet links. To simplify the board’s integration and a variety of interfaces. The board is suitable for a many popular industry standard operating systems are range of high-performance applications in industrial supported. Full system monitoring is provided by the control, telecomms, telemetry, scientific and aerospace PICMG 2.9 compliant IPMI interface. HIGHLIGHTS � 2.2 GHz or 1.7 GHz Intel Pentium 4 Processor-M: � CompactPCI controller: - 400 MHz Front Side Bus - operates in system slot or peripheral slot - 512 Kbytes L2 cache - 32/64-bit at 33/66 MHz CompactPCI interface - no CPU fan needed � Option to bypass CompactPCI bus (Satellite Mode) - single slot � IPMI (Intelligent Platform Management Interface): � Up to 2 Gbytes DDR SDRAM (with ECC) - PICMG 2.9 (System Management Specification) � Ultra 160 SCSI interface - with BMC (Baseboard Management Controller) � 2 x USB ports � High performance EIDE interfaces with on-board CompactFlash site � 2 x asynchronous RS232 serial channels � Optional on-board 2.5 inch disk drive or � Floppy disk interface CompactFlash/Microdrive™ carrier (within a single slot) � Watchdog timer; Long Duration Timer � 3 x 10/100/1000Mbps Ethernet interfaces � Parallel Printer Port (ECP, EPP and IEEE1284) � Dual Gigabit Packet Switching Backplane (PICMG 2.16) � Optional blank front panel (see PP 200/11x datasheet) � 1 x PMC module interface (32/64-bit and 33/66 MHz) � Optional Transition Module for rear panel I/O � High resolution graphics interface � Support for Linux®, Windows NT®, Windows® 2000, � PS/2 Keyboard and Mouse port Windows® XP, Windows® XP Embedded ,VxWorks® and QNX® � 512 Kbytes of BIOS Flash EPROM � 8 Mbytes of Application Flash 4 Gilberd Court, Colchester, Essex, CO4 9WN, UK CONCURRENT Tel: +44 (0)1206 752626 Fax: +44 (0)1206 751116 3840 Packard Road, Ann Arbor, MI 48108, USA TECHNOLOGIES Tel: (734) 971 6309 Fax: (734) 971 6350 Central Processor 1 x Ethernet Universal Graphics PMC 10/100/ 2 x RS232 Serial Bus Interface 1000Mbps Interface � 2.2 GHz or 1.7 GHz Intel® Pentium® 4 Processor-M:- � using a socketed Flip-Chip CPU Serial Keyboard Mouse Intel USB SM722 Interface Interface Interface 82540 � 400 MHz Front Side Bus � 512 Kbytes of secondary (L2) on-die Bridge cache 32-bit PCI Bus 3V BIOS � no CPU fan Flash EPROM 64-bit PCI Bus Real-Time � utilizes 64-bit ServerWorks’ ServerSet™ GC Pentium 4 ServerWorks Clock GC-LE Processor-M LE chipset Application DDR DRAM IPMI Flash SDRAM � supporting up to 2 Gbytes of 200MHz DDR 64-bit PCI Bus CF ECC SDRAM:- TM � up to 2 Gbytes provided via a 184-pin Floppy PCI Printer EIDE LSI Panel Intel Disk DIMM socket Interface Interface 53C1000 Link 82546 Bridge Interface � single bit error correction; double-bit CF or error detection � accessible from Intel Pentium 4 Processor-M or CompactPCI bus IPMB DVI-D EIDE U160 2 x Ethernet (PSB) CPCI SCSI 10/100/1000Mbps Printer Hard Disk Interfaces � EIDE interface:- � supports up to Ultra-DMA 100 for high Serial Interfaces Software Support performance drives � 2 x RS232 serial channels using 16550 � Linux, Windows NT, Windows 2000, Windows � two channels (primary and secondary) compatible UARTs XP, Windows XP Embedded, VxWorks and � secondary channel supports on-board QNX � 1 x channel accessed via a 26-way CompactFlash site high-density connector on front panel and Firmware Support � plus, secondary channel options; both channels via J5 to 2 x D-type TM � Phoenix® ServerBIOS on-board 2.5 inch disk drive; or, support connectors on the Transition Module � comprehensive Power-On Self-Test (POST) for 1 or 2 CompactFlash or � each channel supports CTS, RTS, DSR, DTR, IBM® MicrodriveType II drives. Either � LAN boot firmware included DCD and RI via front panel and Transition option within a single slot Module IPMI � primary channel is accessible via J5 to � PICMG 2.9 R1.0 (System Management Other Peripheral Interfaces the Transition Module Specification) � keyboard and mouse interfaces accessed via � Ultra 160 SCSI:- a 26-way high-density connector on front � implements the IPMB0 interface � implemented by an LSI Logic® 53C1000 panel or via J5 to the Transition Module � on-board Baseboard Management Controller � accessible via J3 to the Transition Module � floppy disk interface via J5 to the Transition � 8 Kbytes of non-volatile memory Ethernet Interfaces Module Electrical Specification � 3 x channels supporting 10 Base-T, 100 � 2 x USB (Universal Serial Bus) interfaces; � +5V@7A; (typical at 2.2 GHz with 1 Gbyte Base-TX, 1000 Base-T one via front panel, both via J5 to the DRAM); +5% / -3% � implemented by an Intel® 82540EM Transition Module � +3.3V@8A; +5% / -3% Controller (32-bit PCI bus) and Intel® � parallel printer port interface (ECP, EPP and 82546EB LAN Controller (64-bit PCI bus) � +12V@0.0A ; -12V@0.0A IEEE1284) via J5 to the Transition Module � one channel accessible via front panel � +12V and -12V routed to PMC expansion slot � 1 x 32-bit Long Duration Timer with RJ45 processor interrupt capability Safety � two channels accessible via J3 to the PSB � system fan monitor; CPU temperature � PCB (PWB) manufactured with flammability or the Transition Module monitor; voltages monitor:- rating of 94V-0 � support for PICMG 2.16 - Packet Switching � all accessible via IPMI Backplane (PSB) � watchdog timer; speaker interface Environmental Specification � 0°C to +55°C (operating) Graphics Interface CompactPCI Interface � 10% to 90% Relative Humidity (operating � implemented by a Silicon Motion® SM722 � compliant with PICMG 2.0 R3.0; 3.3V or 5V non-condensing) providing:- signaling levels:- � -40°C to +70°C (storage) � 8 Mbytes video memory � universal signaling supported � 10% to 90% Relative Humidity (storage � resolutions up to 1280 x 1024 � 33/66 MHz; 32/64-bit interface accessed via non-condensing) � supporting up to 16M colors J1/J2 connectors � accessed via a 26-way high-density Mechanical Specification � utilizing a PCI-PCI bridge for off-board connector on front panel accesses � 6U form-factor: 9.2inches x 6.3inches � flat panel supported via DVI-D interface via � PICMG® 2.1 R2.0 Hot Swap Specification (233mm x 160mm) J3 to the Transition Module compatible as hot swap controller only � single-slot: 0.8inches (20.3mm); for blank � operates as a System Slot controller or in a front panel see PP 200/11x PMC Interface peripheral slot � connectors: IEC-1076-4-101 for J1-J5 � 1 x PMC slot with I/O via front panel:- � option to disable CompactPCI interface � shock: � supports 32/64-bit, 33/66 MHz PCI (Satellite Mode):- 20g, 11ms, ½ sine (operating); operation � receives power from CompactPCI bus 30g, 11ms, ½ sine (non-operating) � dedicated PCI bus for optimal throughput � board can be hot swapped in this mode � vibration: Flash EPROM � 5Hz-2000Hz at 2g, 0.38mm peak J4 connector not fitted � 512 Kbytes of BIOS Flash EPROM 8-bits wide displacement (operating); 5Hz-2000Hz at 5g, 0.76mm peak � 8 Mbytes Application Flash displacement (non-operating) ORDERING INFORMATION Order Number Product Description (Hardware) Replace the order number suffix (xy) with selections from the following: PP 200/011-xy 1.7 GHz Pentium 4 Processor-M where x = where y = PP 200/012-xy reserved 1 - Ethernet via rear panel 1 - 256 Mbytes PP 200/013-xy 2.2 GHz Pentium 4 Processor-M 2 - Ethernet via PICMG 2.16 2 - 512 Mbytes 3 - 1 Gbyte AD PP4/001-xx Transition Module 4 - 2 Gbytes AD 200/001-01 CompactFlash/Microdrive carrier assembly AD CP1/DR1-xx 2.5 inch Disk Drive assembly For blank panel version, see PP 200/11x datasheet CB 26D/124-xx 26-way HD to VGA, Keyboard, Mouse, RS232 connector cable All companies and product names are trademarks of their respective organizations. Datasheet Code 1437/0604 Specification subject to change; E and OE. © Concurrent Technologies 2004 PMC Module