2710 Concurrent Programming System ™ Concurrent Programming System Supports over 25,000 devices with  voltages down to 1.5V (Vdd) including, but not limited to, Production-ready Flash Programming EPROM, EEPROM, Flash EPROM, The 2710 Concurrent Programming System® is the industry standard for programming Microcontrollers, PLD, CPLD, FPGA, throughput and speed, universal device support and high uptime. It combines the and antifuse FPGAs industry's fastest programming technology, 0.24s/Mb, BPM Micro's FX4™ socket modules and our Concurrent Programming System®. This powerful combination, unmatched in Supports device densities up to 4  the industry, means higher throughput, reduced cost per device and faster turnarounds. Gbits  What this means to you: higher profits for your business. By taking advantage of the proven 7th Generation technology, we have improved the site hardware to allow us the FX4™ socket modules include 3  capability of programming devices with densities up to 4 Gbits. In addition, we have separate LED's per socket and allow incorporated the industry's widely accepted high-speed USB 2.0 standard bus for the 2710 to program up to 24 communications. devices simultaneously on a 6-site model Flash and Universal Support The 2710 is designed specifically for today's highest density devices and their longer Patented solution to guard against  programming times, including Flash. It features the industry's fastest universal passing blank parts-available only  programming technology that programs a 64Mb device in just 15s*. The 2710 also uses from BPM Microsystems BPM Micro's FX4™ socket modules. FX4™ socket modules program up to four devices simultaneously per site. With 2, 4, or 6 programming sites, the 2710 can program up to Uses USB 2.0 communications bus  24 devices at the same time and allows you to take advantage of up to four times the throughput. Compatible with all existing socket  modules Supports all device packages,  including, but not limited to, DIP, SDIP, PLCC, TSOP, SSOP, PCMCIA, QFN, MLF, LAP, SOIC, LCC, QFP, PQFP, PGA, SIMM, CSP, BGA, µBGA,  TQFP and TSSOP Ideal for low to high-volume manual  production Serialization support using standard,  FX, FX2, and FX4 socket modules BPM MICROSYSTEMS *ST Microelectronics™ M28W640CB, program only. 5373 WEST SAM HOUSTON PKWY N., SUITE 250 HOUSTON, TEXAS 77041 T: 713.688.4600 T: 800.225.2102 F: 713.688.0920 WWW.BPMMICRO.COM NEED LOGO N 2710 Technical Specifications GENERAL PIN DRIVERS Power: 90-260VAC, 47-63 Hz., .12 KVA per Quantity: 240-pins standard site, IEC inlet connector for worldwide use Analog Slew rate: 0.3 to 25V/µs Dimensions and Masses: Vpp Range: 0-25V in 25mV steps  Ipp Range: 0-70mA continuous, 250mA peak 2-site model 21.55" (547mm) x 8.65" (220mm) x 4.68" (119mm), 12.2 lbs. (5.5 kg) Vcc Range: 0-12V 4-site model 21.55" (547mm) x 16.10" (409mm) x Icc Range: 0-1A, 12µA resolution 4.68" (119mm), 21.5 lbs. (9.6 kg) Very low voltage: to 1.5V (Vdd) 6-site model 31.35" (796mm) x 16.10" (409mm) x 4.68" (119mm), 31.5 lbs. (14.3 kg) Rise Time: 800ps Overshoot: none Clocks: continuously variable 1 MHz to 30 SOFTWARE MHz Required: BPWin Protection: overcurrent shutdown, power failure shutdown File Type: binary, Intel, JEDEC, Motorola, POF, RAM, straight hex, hex-space, Independence: pin drivers and waveform generators are fully independent Tekhex, Extended Tekhex, ASCII and concurrent on each site hex, Formatted Binary (.DIO), AFM, OMF, LOF, MER, and others Device Commands: blank, check sum, compare, options, program, test, verify, FEATURES erase File Loading: automatic file type identification; Features: data editor, revision history, session no download time because programmer is PC controlled; logging, on-line help, device and supports Intel, JEDEC, Motorola algorithm information S-record, POF, straight hex, hex-space, Tekhex, and other file formats Device Selection: intelligent device selector allows HARDWARE you to type as little or as much of the part number as you like then Architecture: Concurrent Programming System choose from a list of devices matching your description Sites: 2, 4, or 6 per chassis; multiple chassis may be linked Devices Supported: including, but not limited to, Antifuse, Low Voltage, PROM, Calibration: annual, may be performed on site EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA Diagnostics: pin continuity test, RAM, ROM, CPU, pin drivers, power supply, Continuity Test: each pin, including Vcc, ground, communications, cables, and signal pins, may be tested calibration, timing, ADC, DAC, before every programming interconnects operation Memory: 512MB per site Protection: overcurrent shutdown; power failure shutdown; ESD protection, User Interface: Pass, Fail, Active, Start LEDs and reverse insertion, banana jack for Start switch on each site; PC ESD wrist straps display shows systems status at a glance; auto-start mode Options: available Socket Modules including, automatically begins programming but not limited to, Universal PLCC, when device is inserted standard PLCC, PGA, CSP, BGA, µBGA, SOIC, QFN, MLF, LAP, QFP, PC System Requirements: Microsoft Windows 2000 or above TSOP, LCC, SDIP, PCMCIA, SIMM - JobMaster™ software, Advanced Operational Temperature: 41° to 104° F (5° to 40°C) Feature Software, simple and complex serialization Programming Yield: assured by independent universal pin drivers on each socket, short STANDARD ACCESSORIES distance from pin drivers to device, and accuracy of waveforms Included: software on CD-ROM user manual on CD-ROM Algorithms: all algorithms are manufacturer power cable approved or certified (if required) - data cable BPM Microsystems has an excellent 1-year hardware warranty record of being first to provide 1-year software support certified algorithms for new devices Algorithm Updates: algorithm changes and updates are available, additional algorithms available by subscription after the first year © BPM Microsystems. Concurrent Programming System is a registered trademark of BPM Microsystems. Windows is registered trademark of Microsoft Corporation 2710DS_EN_1006 BPM MICROSYSTEMS - Setting the Standard in Device Programming  5373 WEST SAM HOUSTON PKWY N., SUITE 250 - HOUSTON, TEXAS 77041 T: 713.688.4600 / 800.225.2102 / F: 713.688.0920 / BPMMICRO.COM