2610 Concurrent Programming System ™ Concurrent Programming System  Supports over 25,000 devices with voltages down to 1.5V (Vdd) including, but not limited to, Flexible, High-speed Programming EPROM, EEPROM, Flash EPROM, The 2610 Concurrent Programming System is the industry standard for flexibility, device Microcontrollers, PLD, CPLD, FPGA, support and speed. With BPM Microsystems' Sixth Generation Technology, the 2610 is a and antifuse FPGAs universal production programmer that can program a 64Mb device in an incredibly fast  15s* and is ideal for today's highest density devices. It also supports virtually all device  Proven 6th Generation Technology technologies from 5V all the way down to 1.5V. The 2610 is designed with the USB 2.0  Compatible with FX, standard standard bus to provide faster communication speeds and greater reliability. With over manual and automated socket 2,500 socket modules available, this programmer supports virtually all package types modules from the largest QFP to the smallest µBGA.  Uses USB 2.0 communications bus   Patented solution to guard against passing blank parts-available only from BPM Micro  Supports all device packages, including, but not limited to, DIP, SDIP, PLCC, TSOP, SSOP, PCMCIA, QFN, MLF, LAP, SOIC, LCC, QFP, PQFP, PGA, SIMM, CSP, BGA, µBGA, TQFP and TSSOP   Ideal for low to mid-volume production *ST Microelectronics™ M28W640CB, program only. BPM MICROSYSTEMS 5373 WEST SAM HOUSTON PKWY N., SUITE 250 HOUSTON, TEXAS 77041 T: 713.688.4600 T: 800.225.2102 F: 713.688.0920 WWW.BPMMICRO.COM NEED LOGO N 2610 Technical Specifications GENERAL PIN DRIVERS 2-Site Model Operating Voltage: 100-240 VAC Quantity: 240-pins standard Frequency: 50-60 Hz Analog Slew rate: 0.3 to 25V/µs Current Rating: 8-4 A (Fuse 250V 6A SB) Vpp Range: 0-25V Dimensions and Mass: 21.55” (547mm) x 8.65” (220mm) x Ipp Range: 0-70mA continuous, 250mA peak 4.68” (119mm), 12.2 lbs. (5.5 kg) Vcc Range: 0-12V 4-Site Model Operating Voltage: 100-240 VAC Icc Range: 0-1A Frequency: 50-60 Hz Very low voltage: to 1.5V (Vdd) Current Rating: 10-5 A (Fuse 250V 6A SB) Rise Time: 4ns Dimensions and Mass: 21.55” (547mm) x 16.10” (409mm) x 4.68” (119mm), 21.5 lbs. (9.6 kg) Overshoot: none 6-Site Model Operating Voltage: 100-240 VAC Clocks: continuously variable 1 MHz to 30 MHz Frequency: 50-60 Hz Protection: overcurrent shutdown, power Current Rating: 12-6 A (Fuse 250V 6A SB) failure shutdown Dimensions and Mass: 31.35” (796mm) x 16.10” (409mm) Independence: pin drivers and waveform x 4.68” (119mm), 31.5 lbs. (14.3 kg generators are fully independent and concurrent on each site SOFTWARE Required: BPWin FEATURES File Type: binary, Intel, JEDEC, Motorola, POF, File Loading: automatic file type identification; RAM, straight hex, hex-space, no download time because Tekhex, Extended Tekhex, ASCII programmer is PC controlled; hex, Formatted Binary (.DIO), AFM, supports Intel, JEDEC, Motorola S- OMF, LOF, MER, and others record, POF, straight hex, hex-space, Tekhex, and other file Device Commands: blank, check sum, compare, formats options, program, test, verify, erase Device Selection: intelligent device selector allows you to type as little or as much of the part number as you like then Features: data editor, revision history, session choose from a list of devices logging, on-line help, device and matching your description algorithm information Devices Supported: including, but not limited to, HARDWARE Antifuse, Low Voltage, PROM, EPROM, EEPROM, Flash EEPROM, Microcontrollers, SPLD, CPLD, FPGA Architecture: Concurrent Programming System Continuity Test: each pin, including Vcc, ground, Sites: 2, 4, or 6 per chassis; multiple and signal pins, may be tested before every programming chassis may be linked operation Calibration: annual, may be performed on site Protection: overcurrent shutdown; power failure shutdown; ESD protection, Diagnostics: pin continuity test, RAM, ROM, reverse insertion, banana jack for CPU, pin drivers, power supply, ESD wrist straps communications, cables, Options: available Socket Modules including, calibration, timing, ADC, DAC, but not limited to, Universal PLCC, interconnects standard PLCC, PGA, CSP, BGA, µBGA, SOIC, QFP, TSOP, LCC, SDIP, PCMCIA, QFN, MLF, LAP, Memory: 64MB per site standard SIMM—JobMaster™ software, Advanced Feature Software, simple and complex serialization User Interface: Pass, Fail, Active, Start LEDs and Start switch on each site; PC Programming Yield: assured by independent universal display shows systems status at a pin drivers on each socket, short glance; auto-start mode distance from pin drivers to device, automatically begins programming and accuracy of waveforms when device is inserted Algorithms: all algorithms are manufacturer approved or certified (if PC System Requirements: Microsoft Windows 2000 or above required)—BPM Microsystems has an excellent record of being first to Operational Temperature: 41° to 104° F (5° to 40° C) provide certified algorithms for new devices Algorithm Updates: algorithm changes and updates are available, additional algorithms STANDARD ACCESSORIES available by subscription after the first year Included: software on CD-ROM user manual on CD-ROM power cable data cable 1-year hardware warranty 1-year software support © BPM Microsystems. Concurrent Programming System is a registered trademark of BPM Microsystems. Windows is registered trademark of Microsoft Corporation 2610DS_EN_1006 BPM MICROSYSTEMS - Setting the Standard in Device Programming  5373 WEST SAM HOUSTON PKWY N., SUITE 250 - HOUSTON, TEXAS 77041 T: 713.688.4600 / 800.225.2102 / F: 713.688.0920 / BPMMICRO.COM