ARTESYN SXQ50-48S3V3-R
Description
CONV DC/DC HIEFF 3.3VOUT 50W SMD
Part Number
SXQ50-48S3V3-R
Price
Request Quote
Manufacturer
ARTESYN
Lead Time
Request Quote
Category
TBD
Datasheet
Extracted Text
SXQ50 Series Single output DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters 1 • Surface mount quarter-brick format • High efficiency topology, 90% at 5V and 86.5% typical at 1.8V • Low profile, open-frame package • Wide operating temperature, -40°C to +90°C (with derating) • 90% to 110% output trim • No minimum load • Remote on/off The SXQ50 series are surface mount high-efficiency, isolated DC/DC converters in a standard quarter-brick format and a height of just 0.4 inches. The converters provide up to 50 Watts of output power and are capable of delivering very high current at low voltages. Patent pending technology ensures unprecedented levels of performance from a 50W surface-mount DC/DC converter. The first four models in the series feature an input voltage range of 33 to 75VDC and are available with output voltages of 5.0V, 3.3V, 2.5V or 1.8V. The output voltage of each model is adjustable from 90% to 110% of its nominal value. Typical efficiencies are 90% for the 5V model, 89% for the 3.3V, 88% for the 2.5V and 86.5% for the 1.8V. All SXQ50 series converters have a remote on/off capability, and are fully protected against over-voltage, over-temperature and short-circuit conditions. TÜV Featuring full international safety approval, including EN60950 (TÜV Product Service) and UL/cUL 60950, SXQ50 series converters reduce compliance costs and time to market. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Total error band (See Note 8) 4.5% Conducted emissions EN55022 (See Note 2) Level A EN55022 (See Note 2) Level B Set point accuracy ±2.0% max. Radiated emissions EN55022 Level A Immunity: Line regulation Low line to high line 0.3% max. ESD air EN61000-4-2 8kV, 15kV Load regulation Full load to min. load 0.3% max. ESD contact EN61000-4-2 6kV, 8kV EFT DC Input EN61000-4-4, 2kV (NP) Voltage adjustability 90% to 110% Radiated field enclosure EN61000-4-3 10V/m Conducted (DC power) EN61000-4-6 10V (NP) Output remote (See Note 9) 10% sense range Conducted (signal) EN61000-4-6 10V (NP) Input transients ETS 300 132-2, ETR 283 Minimum load 0A GENERAL SPECIFICATIONS Overshoot At turn-on and turn-off None Efficiency See table Undershoot None Operational insulation Input/output 1500VDC Ripple and noise 5Hz to 20MHz 120mV pk-pk 30mV rms Switching frequency Fixed 350kHz Transient response 5% max. deviation Approvals and EN60950 (TÜV Product Service) (See Note 1) 200µs recovery to standards (See Note 4) UL/cUL60950 within total error band Material flammability UL94V-0 INPUT SPECIFICATIONS Weight 25g (0.88oz) Input voltage range 48Vin nominal 33 to 75VDC MTBF MIL-HDBK-217F >292,000 hours Input current No load 60mA @ 40°C, 100% load Remote OFF 25mA ground benign Input current (max.) 1.73A max. @ Io max. ENVIRONMENTAL SPECIFICATIONS (See Note 3) and Vin = 33 Thermal performance Operating temperature -40°C to +90°C Input reflected ripple (See Note 5) 110mA (pk-pk) Non-operating -40°C to +125°C Active high remote ON/OFF (See Note 7) Logic compatibility Open collector ref to -input International Safety Standard Approvals ON Open circuit or <12VDC OFF <1.2VDC UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 Undervoltage lockout Power up 32.5V file No. E174104 Power down 30.5V TÜV TÜV Product Service. Certificate No. B 01 11 38572 029 Start-up time Power up 10ms (See Note 6) Remote ON/OFF 3ms File Name: SXQ50S.PDF Rev: 09 Oct 2002 SXQ50 Series Single output DC/DC CONVERTERS 36-50W High Efficiency DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT OUTPUT OUTPUT (10) REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER OVP CURRENT CURRENT (7, 11) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 36W 33-75VDC 2.3VDC 1.8V 0A 20A 86.5% ±0.3% ±0.3% SXQ50-48S1V8 50W 33-75VDC 3.0VDC 2.5V 0A 20A 88.0% ±0.3% ±0.3% SXQ50-48S2V5 50W 33-75VDC 3.9VDC 3.3V 0A 15A 89.0% ±0.3% ±0.3% SXQ50-48S3V3 50W 33-75VDC 6.0VDC 5.0V 0A 10A 90.0% ±0.3% ±0.3% SXQ50-48S05 Notes PROTECTION 1 di/dt = 0.1A/µs, Vin = 48VDC, Tc = 25°C, load change = 0.5 lo max. to Short circuit protection (<20mΩ short) Continuous 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 The SXQ50 meets level A and level B conducted emissions only with Overvoltage protection Non-latching clamp external components connected before the input pins to the converter. See Application Note 120 for details. TELECOM SPECIFICATION 3 Recommended input fusing is a 3.15A HRC 200V rated fuse. 4 This product is only for inclusion by professional installers within other Central office interface A ETS300-132-2, input voltage equipment and must not be operated as a stand alone product. and current requirements 5 Measured with no external Pi filter. Significant reduction possible with external filter. 6 Start-up into resistive load. CAUTION: Hazardous internal voltages and high temperatures. 7 Active low remote ON/OFF is available. Standard product is active high. Ensure that unit is not user accessible. When ordering active low parts, designate with the Suffix ‘-R’, e.g SXQ50-48S3V3-R. 8 This parameter is calculated at worst case line, load, temperature and initial settings. 9 This is inclusive of the output trim range. If 6.0% trim-up is used, for example, then only 4.0% output sense is available. 10 Maximum, not typical, specification. 11 To order an Evaluation Kit which contains a SXQ50 model pre-mounted on a circuit card with test points for easy testing in the laboratory, please add the suffix ‘-EVAL’ to the model number, e.g. SXQ50-48S05-EVAL. Please see the SXQ50 Evaluation Board User Guide for further details. PIN CONNECTIONS 2.300±0.010 (58.42±0.25 0.055 (1.40) 0.055 (1.40) PIN NUMBER FUNCTION +Vin +Vout 1+Vin +Sense Remote Trim On/Off -Sense -Vin -Vout Converter Outline 2 On/Off 3.0 mm x 1.7 mm 8 Places Top View 3-Vin 1.460 (37.08) 4-Vout 1.025 (26.04) 1.025 (26.04) 0.017 (0.43) 0.875 (22.23) 0.400±0.017 Recommended Land Pattern Min Clearance 0.725 (18.42) 0.725 (18.42) (10.16±0.44) Top View 5 -Sense Installed HT 0.575 (14.61) Seating Plane 0.425 (10.80) Side View 0.425 (10.80) 6Trim 0.000 (0.00) 0.000 (0.00) 7 +Sense 0.057 (1.45) 2.186 (55.52) Connector, 8+Vout 0.053 x 0.102 (1.34x 2.59) 8 Places -Vout -Vin -Sense Remote Trim All dimensions in inches (mm) On/Off +Sense All tolerance ±0.010in (±0.25mm) +Vout +Vin unless otherwise stated Bottom View Data Sheet © Artesyn Technologies® 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SXQ50S.PDF Rev: 09 Oct 2002 0.600 (15.24) 0.300 (7.62) 0.435 (11.05) 0.435 (11.05) 0.150 (3.81) 0.300 (7.62) 1.460±0.010 0.450 (11.43) (37.08±0.25) 0.600 (15.24) 0.000 (0.00) 0.057 (1.45) 2.243 (56.97) 2.300 (58.42)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SXQ50-48S3V3-R have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods