ARTESYN PM500
Features
- 1 to 10.5W units
- 115VAC input (230VAC version, see PM500CE series)
- Encapsulated package
- PCB mounting
- Short circuit protection
- UL and CSA safety approvals
Datasheet
Artesyn-PM500-Series-datasheet-3102042021.pdf
65 KiB
Extracted Text
PM500 SERIES Single, dual and triple output • Encapsulated package • 1 to 10.5W units • 115VAC input (230VAC version, see PM500CE series) • PCB mounting • Short circuit protection • UL and CSA safety approvals The PM500 series is an encapsulated, board mountable linear AC/DC power module. The series has single, dual and triple output models with industry standard output configurations operating from an input voltage of 115VAC, making the PM500 series suitable for a wide range of low power PCB applications. The PM500 series includes 1W to 10.5W modules. Each module has short-circuit protection and the 5V outputs also have overvoltage protection. Conservative design and rating of these modules results in reliable operation and long life. The PM500 design is a low emissions design with tightly regulated outputs making the series especially suitable for test, measurement and instrumentation equipment. The series also includes 2 sub- miniature modules for low power applications where space is critical. [ 2 YEAR WARRANTY ] SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Voltage accuracy ±1.0% max. Efficiency 40% typical Voltage adjustability PM529 and PM563 only Yes Isolation voltage 700VAC (See Note 1) Approvals and (See Note 5) UL478 Line regulation See table standards CSA C22.2 No. 143 No. 154 Load regulation See table Case material UL94V-0 Non-conductive black plastic Temperature coefficient ±0.02%/°C Weight Case A 181g (6.4oz) Overvoltage protection See table on facing 6.2V typical Case B1 340g (12oz) page for relevant models Case B2 408g (14.4oz) Case B3 635g (22.4oz) Output power limit Typical 130% to 200% FL Case H 227g (8oz) Short circuit protection Switch off/on 100% to 200% FL MTBF (See Note 4) 710,000 hours INPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Input voltage range 115 ±10VAC Thermal performance Operating amb. –25°C to +71°C Non-operating amb. –25°C to +85°C Input frequency range (See Note 3) 47Hz to 400Hz Derating, 50°C to 71°C 2.5%/°C Cooling Free-air convection Safety ground 50Hz Less than 3.5mA cooled leakage current Relative Humidity Non-condensing 20% to 95% RH International Safety Standard Approvals UL478 Reg. File No. E131987 CSA C22.2 No. 143 and No. 154 Reg. File No. LR41062C PAGE 84 ENCAPSULATED LINEAR AC/DC POWER SUPPLIES | 1-10.5W AC/DC 1 to 10.5 Watt AC/DC encapsulated modules OUTPUT OUTPUT REGULATION RIPPLE AND OVP CASE MODEL NUMBERS VOLTAGE CURRENT LINE LOAD NOISE SINGLE OUTPUT 5VDC 500mA Yes ±0.02% ±0.04% 1mV rms B1 PM534 5VDC 1000mA Yes ±0.02% ±0.04% 1mV rms B2 PM542 5VDC 2000mA Yes ±0.02% ±0.05% 1mV rms B3 PM545 12VDC 240mA No ±0.02% ±0.02% 0.5mV rms B2 PM515 (1) SUB MINIATURE SINGLE OUTPUT SERIES 5VDC 250mA No ±0.05% ±0.05% 0.5mV rms H PM529 12VDC 100mA No ±0.02% ±0.02% 0.5mV rms A PM563 DUAL OUTPUT ±12VDC ±120mA No ±0.02% ±0.02% 0.5mV rms B1 PM536 ±12VDC ±400mA No ±0.02% ±0.02% 0.5mV rms B3 PM597 ±15VDC ±25mA No ±0.20% ±0.20% 2mV rms B1 PM538 ±15VDC ±100mA No ±0.02% ±0.02% 0.5mV rms B1 PM505 3 ±15VDC ±200mA No ±0.02% ±0.02% 0.5mV rms B2 PM565 ±15VDC ±350mA No ±0.02% ±0.02% 1mV rms B3 PM501 (2) TRIPLE OUTPUT 5V/±12VDC 300/±180mA No ±0.02% ±.05%/±.02% 0.5mV rms B2 PM595S 5V/±12VDC 1000/±150mA Yes ±0.02% ±.01%/±.02% 1.0/0.5mV rms B3 PM592 5V/±15VDC 300/±150mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM594 5V/±15VDC 500/±100mA Yes ±0.05% ±.10%/±.05% 0.5mV rms B2 PM590 5V/±15VDC 1000/±150mA Yes ±0.02% ±.01%/±.02% 1.0/0.5mV rms B3 PM593 Notes 3 Some units should be derated for operation at 400Hz. Please contact the 1 Trim connection on all sub-miniature series modules provides a means of factory for details. externally adjusting a units output voltage precisely to its labelled value. To 4 M.T.B.F. figures are based on actual product performance. Consult factory raise the output voltage, connect a resistance (20kΩ, min.) between the for details. trim terminal and the positive (+) output terminal. To lower the output 5 All models are only for inclusion by professional installers within other voltage, connect a resistance (20kΩ, min.) between the trim terminal and equipment and must not be operated as a stand alone product. the negative (–) output terminal. 2 Triple output models only: on standard pin-out models the 5V output common is isolated from the ±12VDC or ±15VDC common. http://www.artesyn.com PAGE 85 DS_PM500_20000101.PDF 1-10.5W AC/DC | ENCAPSULATED LINEAR AC/DC POWER SUPPLIES 1 to 10.5 Watt AC/DC encapsulated modules Single output PM500 series CASE A CASE H CASE B 2.00 (50.8) 1.75 2.50 (44.5) 1.60 (63.5) (40.6) 0.50 (12.7) 0.50 (12.7) 0.50 (12.7) 0.60 1.62 1.20 0.60 (15.2) (30.5) (15.2) 0.60 (15.2) (41.1) 1.00 0.20 (25.4) 1.25 (5.1) 0.275 0.50 (12.7) 1.00 (31.8) (7.1) 0.15 0.20 (25.4) (3.8) 0.88 (5.1) (22.4) 0.20 (5.1) – OUT + OUT NC - OUT OUT + – OUT OUT 1.55 TRIM 1.60 0.80 TRIM (39.4) (40.6) (20.3) 3.00 0.40 (76.2) (10.2) 3.50 2.25 (88.9) (57.2) INSERT INSERT 2.60 4.40 THREAD 4.40 THREAD (66.0) 1.80 1.60 0.125 (3.2) DEEP 0.12 (3.0) DEEP (45.7) AC AC (40.6) AC AC AC AC B1 B2 B3 0.20 INSERT (5.1) 0.040 (1.0) 2.20 0.20 4.40 THREAD MIN. 0.20 DIA. PINS 0.040 (1.0) DIA. PINS 0.12 (3.0) DEEP (55.9) (5.1) (5.1) 0.040 (1.0) MIN. MIN. DIA. PINS R1 R2 OR (20K (20K – OUT + OUT MIN.) MIN.) TRIM SUB-MINIA TURE SERIES ALL DIMENSIONS IN INCHES (mm) Dual and triple output PM500 series SIDE VIEW CASE B CASE B CASE B DUAL OUTPUT TRIPLE OUTPUT MODELS TRIPLE OUTPUT MODELS MODELS STANDARD PINOUT ALTERNATE PINOUT SUFFIX '-S' 2.50 2.50 2.50 1.62 (63.5) (63.5) (63.5) (41.1) 1.25 (31.8) 0.15 0.15 0.15 0.88 (3.8) (3.8) (3.8) (22.4) 1.60 1.60 1.60 (40.6) (40.6) (40.6) 3.50 3.50 3.50 (88.9) (88.9) (88.9) INSERTS INSERTS INSERTS 4.40 THREAD 4.40 THREAD 4.40 THREAD 1.60 1.60 1.60 0.125 (3.2) DEEP 0.125 (3.2) DEEP 0.125 (3.2) DEEP (40.6) (40.6) (40.6) AC AC AC AC AC AC B1 B2 B3 2.00 0.20 2.20 2.20 (50.8) (5.1) (55.9) (55.9) 0.040 (1.0) MIN. DIA. PINS ALL DIMENSIONS IN INCHES (mm) Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. PAGE 86 - OUT 0.60 (15.2) 0.50 (12.7) COM 0.50 (12.7) 0.60 (15.2) + OUT - 0.60 (15.2) COM 5V 0.50 (12.7) COM 0.50 (12.7) + 5V 0.60 (15.2) + COM 5V 0.55 (14.0) + 5V 0.55 (14.0) - 0.55 (14.0) COM 0.55 (14.0) + +
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PM500 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods