ARTESYN SXN15-48S2V5
Description
CONV DC/DC HIEFF 2.5VOUT 15W SMD
Part Number
SXN15-48S2V5
Price
Request Quote
Manufacturer
ARTESYN
Lead Time
Request Quote
Category
TBD
Datasheet
Extracted Text
SXN15 Series Single output DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 1 • High efficiency topology, 87% typical at 5V • Wide operating temperature, up to and exceeding 70˚C (natural convection) • 90% to 110% output trim • No minimum load • Overvoltage protection • Remote on/off control The SXN15 is a new high efficiency open frame isolated 15 Watt converter series in an industry standard footprint. The first four models in the series feature an input voltage range of 33 to 75VDC and are available in output voltages of 5V, 3.3V, 2.5V and 1.8V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 87% for the 5V, 86% for the 3.3V, 85% for the 2.5V and 83% for the 1.8V version. The SXN15 series also has a remote on/off capability with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the SXN15 reduces compliance costs and time to market. TÜV 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability 90% to 110% Conducted emissions EN55022 (See Note 3) Level A EN55022 (See Note 3) Level B Total error band (See Note 11) ±3.5% max. Radiated emissions EN55022 (See Longform Data Sheet) Level B Line regulation 1V8 and 2V5 models 0.5% max. Immunity: Low line to high line 3V3 and S05 models 0.1% max. ESD air EN61000-4-2 8kV, 15kV ESD contact EN61000-4-2 6kV, 8kV Load regulation 1V8 model 2.0% max. Radiated field enclosure EN61000-4-3 10V/m Full load to min. load 2V5 model 1.5% max. 3V3 and S05 models 0.5% max. Conducted (DC power) EN61000-4-6 10V Conducted (signal) EN61000-4-6 10V (See Note 10) Minimum load 0% Input transients ETS 300 132-2, ETR 283 Overshoot 1V8 and 2V5 models 3.5% max. GENERAL SPECIFICATIONS At turn-on and turn-off 3V3 and S05 models None Efficiency See table Undershoot None Ripple and noise 1V8 and 2V5 models 40mV pk-pk Operational insulation Input/output 1500VDC (See Note 1) 14mV rms Switching frequency Fixed 265kHz typ. 5Hz to 20MHz 3V3 and S05 models 70mV pk-p 20mV rms Approvals and (See Note 5) UL/cUL1950, EN60950 Transient response 1V8 and 2V5 models 150mV standards TÜV Rheinland (See Note 2) 3V3 and S05 models 100mV typ. deviation 400µs recovery to Material flammability UL94V-0 within total error band Weight 12g (0.42oz) INPUT SPECIFICATIONS MTBF MIL-HDBK-217F >600,000 hours Input voltage range 48Vin nominal 33 to 75VDC Representative model: 48S05 @ 48Vin, 40°C, 100% load ground benign Input current No load 35mA max. BELLCORE 332 >1,500,000 hours Remote OFF 25mA max. Input current (max.) (See Note 4) 0.55A max. @ Io max. ENVIRONMENTAL SPECIFICATIONS and Vin = 33 to 75V Thermal performance Operating ambient -40°C to +65°C Input reflected ripple (See Note 6) 5mA (pk-pk) typ. (See Note 9) temp. (3.3V and 5V) Operating ambient -40°C to +70°C Active high remote ON/OFF (See Note 8) Logic compatibility Open collector ref to -input temp. (1.8V and 2.5V) ON Open circuit or >2VDC Non-operating -40°C to +120°C OFF <1.2VDC (All models) Undervoltage lockout Power up 33V (typ.) Power down 30V (typ.) Start-up time Power up 1.5ms (typ.) (See Note 7) Remote ON/OFF 2.5ms (typ.) File Name: SXN15S.PDF Rev: 16 Oct 2002 SXN15 Series Single output DC/DC CONVERTERS 10.8-15W High Efficiency DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER OVP CURRENT CURRENT (8) VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 10.8W 33-75VDC 2.3VDC 1.8V 0A 6A 83% 0.3% 2.0% SXN15-48S1V8 15W 33-75VDC 3.2VDC 2.5V 0A 6A 85% 0.3% 1.5% SXN15-48S2V5 15W 33-75VDC 4VDC 3.3V 0A 4.5A 86% 0.1% 0.5% SXN15-48S3V3 15W 33-75VDC 6VDC 5.0V 0A 3A 87% 0.1% 0.5% SXN15-48S05 Notes PROTECTION 1 Measured as per recommended set-up. See Application Note 116 for Short circuit protection Continuous further details. 2 di/dt = 0.1A/µs, Vin = 48VDC, Tc = 25°C, load change = 0.5 lo max. to Overvoltage protection Non-latching clamp 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 3 The SXN15 meets level A and level B conducted emissions only with TELECOM SPECIFICATION external components connected before the input pins to the converter. See Application Note 116 for further details. Central office interface A ETS300-132-2, input voltage 4 Recommended input fusing is a 2A HRC 200V rated fuse. and current requirements 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Measured with external filter. See Application Note 116 for further details. CAUTION: Hazardous internal voltages and high temperatures. 7 Start-up into resistive load. Ensure that unit is not user accessible. 8 Active low remote on/off is available. Standard product is active high. Designate with the Suffix '-R' e.g. SXN15-48S05-R. 9 Operating ambient temperatures are specified at natural convection. Higher operating temperatures are possible with increased airflow. See Application Note 116 for further details. 10 Signal Line assumed < 3m in length. 11 This parameter is calculated at worst case line, load, temperature and initial settings. PIN CONNECTIONS 1.905 (48.39) All Dimensions in Inches [mm] PIN NUMBER FEATURE TOP VIEW 1.010 (25.65) 1Vout + 2Vout - 3 N/C 0.335 (8.51) SIDE VIEW 1 0.820 (20.83) 4Trim 0.072 (1.83) 0.110 (2.79) 0.020 (0.51) 0.120 (3.05) Tolerance: ± .015 (± .38) 5 N/C 0.070 (1.78) Recommended Land & Hole Pattern 15 23 46 1.031 (26.19) 6 N/C 0.197 (5.00) 0.197 (5.00) BOTTOM VIEW 0.840 (21.37) 11 10 9 8 7 7 N/C 0.347 (8.81) 11 10 9 87 1.020 (25.91) 0.800 (20.32) 0.105 (2.67) 8 On/Off 0.130 (3.30) 0.302 (7.67) 1.136 (28.85) 0.110 (2.79) 1.483 (37.67) 123 4 56 9 N/C 1.680 (42.67) 1.705 (43.31) 10 Vin - 11 Vin + International Safety Standard Approvals UL/cUL 1950 3rd edition. File No. E135734 TÜV TÜV Rheinland. Certificate No. R2074133 Data Sheet © Artesyn Technologies® 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SXN15S.PDF Rev: 16 Oct 2002
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SXN15-48S2V5 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods