ARTESYN SIL10E-05S1V0-V

Description
CONV DC/DC NIPOL 10A 1V VERT
Part Number
SIL10E-05S1V0-V
Price
Request Quote
Manufacturer
ARTESYN
Lead Time
Request Quote
Category
TBD
Datasheet
Extracted Text
SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated 1 • 10A Current rating NEW Product • Input voltage range: 3.0V - 5.5V • Output voltage range: 0.8V - 3.63V • Ultra high efficiency: 95% @ 5Vin and 3.3Vout • Extremely low internal power dissipation • Minimal thermal design concerns • Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 • Ideal solution where board space is at a premium or tighter card pitch is required • Industry standard footprint and pin out The SIL10E series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or a 3.3V source. The SIL10E offers a range of fixed outputs and one wide trim output unit at an industry leading 10A which allows maximum design flexibility and a pathway for future upgrades. The SIL10E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10E offers compact size and efficiencies of up to 95%. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Fixed output versions ±10% Electrostatic discharge EN61000-4-2, IEC801-2 5Vin with wide trim 3.6V to 0.8V Conducted immunity EN61000-4-6 3.3Vin with wide trim 2.75V to 0.8V Radiated immunity EN61000-4-3 Setpoint accuracy ±2.7% GENERAL SPECIFICATIONS Line regulation ±1.0% Efficiency See table Load regulation ±1.0% Insulation voltage Non-isolated Minimum load 0A Switching frequency Fixed 300kHz typ. Overshoot/undershoot None Approvals and EN60950 Ripple and noise 50mV pk-pk standards UL/cUL60950 0 to 20MHz BW 25mV rms max. Material flammability UL94V-0 Temperature co-efficient ±0.01%/ºC Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm Transient response 50mV max. deviation (Vertical version) 2.0 x 0.31 x 0.5 inches 50µs recovery to within ±1.0% Pin length Vertical 0.135 ±0.02 in (3.43 ±0.5mm) Remote sense 10% Vo compensation Weight 5g (0.18oz) MTBF Telcordia SR-332 7,042,000 INPUT SPECIFICATIONS Input voltage range 3.0 to 5.5VDC ENVIRONMENTAL SPECIFICATIONS Input current No load 70mA Thermal performance Operating ambient, -40ºC to +100ºC (See Note 2) Input current (max.) 8A max. @ Io max. Non-operating -40ºC to +125ºC and Vout = 3.3V Input current ripple 65mA rms PROTECTION Remote ON/OFF (See Note 1) Short-circuit protection Continuous Start-up time 20ms Thermal protection Automatic recovery International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E174104 UL60950 file No. E174104 TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38572 035 CB report and certificate to IEC60950 File Name: sil10e.pdf Rev: 27 Feb 2003 SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT OUTPUT OUTPUT REGULATION INPUT OUTPUT EFFICIENCY MODEL POWER CURRENT CURRENT VOLTAGE VOLTAGE (TYP.) NUMBER LINE LOAD (MAX.) (MIN.) (MAX.) 8.8W 3.0V - 5.5V 0.8V 0A 10A 83% ±1% ±1.5% SIL10E-05S0V8-V 11W 3.0V - 5.5V 1.0V 0A 10A 86% ±1% ±1.5% SIL10E-05S1V0-V (3) 13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±1% ±1% SIL10E-05S1V2-V 16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±1% ±1% SIL10E-05S1V5-V 19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±1% ±1% SIL10E-05S1V8-V 22W 3.0V - 5.5V 2.0V 0A 10A 93% ±1% ±1% SIL10E-05S2V0-V (3) 27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±1% ±1% SIL10E-05S2V5-V 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05S3V3-V 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10E-05W3V3-V Part Number System with Options SIL10E-05S3V3-V Mounting Option Product Family V = Vertical Mount SIL = Single In Line H= Horizontal Mount Rated Output Current Output Voltage 10 = 10Amps 2.5V, 3.3V etc Performance Number of Outputs E= Enhanced Performace S = Single Input Voltage W = Wide 05 = 3.0V - 5.5V 12 = 10V - 14V Output Voltage Adjustment of the SIL10-05Wxxx Series Output Voltage Adjustment of the SIL10E-05W3V3 Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8V to 3.6V. When the SIL10E-05W3V3 converter leaves the factory the output has been adjusted to the default voltage of 3.3V • When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V • When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V Notes 1 Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. 2 Full de-rating curves available in both the Long Form Data Sheet and Application Note 134. 3 For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02. CAUTION: High internal temperatures. Ensure that unit is not user accessible. File Name: sil10e.pdf Rev: 27 Feb 2003 SIL10E Series Single output DC/DC CONVERTERS E Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PIN VIEW 2.000 ±0.020 (50.80 ±0.50) 0.500 (12.70) PCB SIDE VIEW 54 3 2 1 62 53 1 J2 J1 0.316 ±0.008 (8.03 ±0.20) 0.100 (2.54) J1 PIN CONNECTIONS 0.170 (4.32) 1.900 (48.26) 0.050 (1.27) PIN NUMBER FUNCTION 1+Vout Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2+Vout 2 Place ±0.15 3 Place ±0.006 3 Remote Sense (+) 4+Vout 5Ground Figure 1: Mechanical Drawing - Horizontal Mount Version J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1Ground 2+Vin 3+Vin 4 No Pin SIDE VIEW FRONT VIEW 5Trim 0.307 ±0.008 2.000 ±0.020 (7.80 ±0.20) (50.80 ±0.50) 0.500 (12.70) 6 Remote ON/OFF PCB 0.135 (3.43) 0.635 (16.13) 15 2 3 4 15 2 3 6 J2 J1 0.168 (4.26) 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet © Artesyn Technologies® 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: sil10e.pdf Rev: 27 Feb 2003
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SIL10E-05S1V0-V have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods