™ INTELLAPATCH 64/144 Physical Layer Switches Data A Simple Solution For Network & Lab Physical Layer Automation Specifications ™ APCON’s INTELLAPATCH 64/144 Switching Systems are the industry's first state-of-the-art Automated Physical Layer Switches. INTELLAPATCH 64/144 switches provide a seamless solution for managing your network at its foundation, the physical layer. With its wire-once technology, network managers have the ability to automate and control their network environment with APCON’s easy to use hardware and software. As your network continues to grow, and managing that network becomes more complex, having the ease and flexibility to rearrange your physical network topology makes INTELLAPATCH switches a perfect fit for any network environment. Unmanageable physical wiring termination points become a thing of the past ™ with APCON’s CONTROL Software. Simply move physical network connections with no manual intervention. With INTELLAPATCH switches, making changes to your network topology has never been easier. When used in a test lab environment, the INTELLAPATCH 64 and 144 with AUTO ™ SWITCH Software provide lab managers and test engineers the ability to control multiple test configurations, and automate strategic test sequences that would normally require manual intervention to complete. With their integrated functionality, INTELLAPATCH switches and AUTO SWITCH set new standards for test environments providing more accurate test results, lower operational costs and faster product time to market. APCON’s INTELLAPATCH 64/144 proven technology is leading the way in physical layer switching and test lab automation. APCON’s Physical SYSTEM SERVICES Layer Switch allows you to lower Architecture and Capacity Fault Tolerance development and � Full duplex, non-blocking, up to 384 Gbps � All modules are hot-swappable using CONTROL switching capacity per chassis software to power down each slot testing costs, as � Dual power supplies with individual AC power � 4 or 9 slots per chassis, 16 ports per slot with you maximize any interface module allowed to any interface � Optional 1+1 redundancy for switching/control resources. slot Flexible Software Control Options � 64 or 144 hot-pluggable SFP transceivers � GUI Management for Windows based platforms � 90-260 VAC redundant power bus � Command line utility � Signal regeneration on all ports � API for simplified programming � TCP/IP and serial port for remote control � Multi-user proxy � ASCII command set � Point-to-point (full duplex), multicast (1 to N) and loop topologies supported ™ INTELLAPATCH 64/144 - Streamline Your Test Lab Environment Data In the new age of networking, high-speed data over fiber and copper has become the focus for Specifications Research & Development (R&D) and Interoperability testing. As a result, management and control of copper and sensitive optical cables has become a priority among test and network engineers. APCON’s INTELLAPATCH 64/144 switches provide a simple, effective, and low-cost solution to help manage fiber optic and copper cable connectivity. With their wire-once technology, INTELLAPATCH switches provide non-blocking, any-to-any connections at wire speed for Fibre Channel, Ethernet, and SONET/SDH over OC-3, OC-12 and OC-48. The INTELLAPATCH 64 and 144 allow switching in point-to-point (full duplex), multicast (1 to N) and loop topologies. Compatibility or production testing between multiple servers, switches, storage systems, attached devices, peripherals, and operating systems must simulate "real world" use. INTELLAPATCH swithes can significantly reduce engineering, equipment and test reconfiguration time required to validate compatibility among many network devices. ™ Combined with APCON's powerful AUTOSWITCH scheduling software, users have a fully integrated solution to their cable management and test scheduling requirements. Up to 16 frequently used configurations can be stored in the INTELLAPATCH 64 and 144 and can be recalled systematically ™ using APCON's CONTROL Software. Simply put, APCON's INTELLAPATCH 64 and 144 and AUTOSWITCH solutions will streamline your testing process so you distribute your product to market faster. Cable Break Simulation SERVICES FOR TEST LAB APPLICATIONS Benefits � Lower testing costs � Distribute product to market faster � Increase test repeatability Applications � Reconfigure test devices "on the fly" through software � Electronic simulation of cable breaks and port failover � Electronic sharing of analyzers, probes, and sniffers � Intrusive and non-intrusive line monitoring � Multicast traffic generators: (1 to N) sends Tx port 1 to Rx ports 2-64 or 2-144 Features � Automate and schedule system test routines � Remote access and control � Presets allow common test sequences to be instantly configured � Port naming for test devices and network elements � Media conversion: Multimode to Singlemode, Fiber Optic to Copper � Signal amplification on each port Network Reconfiguration Simulation ™ INTELLAPATCH 64/144 - Control Your Network From Anywhere Data As network engineers look to manage and secure critical data running on their network, APCON’sINTELLAPATCH Specifications 64/144 switches provide a first line of defense for access control and security where physical network connections terminate, like demarcation points (DMARC), multi-tenant units (MTU), central offices (CO), wiring closets and test labs. Managing remote locations can be costly and time consuming when network problems occur due to cable failure or cable breaks. INTELLAPATCH switches give network providers the ability to manage physical connections from one central location, reducing operations and labor intensive efforts needed to support these remote sites. The results are customers who receive faster action on their service calls and network providers who reduce overall operations cost for service support. With their ability to provide multicast and signal regeneration, the INTELLAPATCH 64 and 144 combined with a network analyzer is an effective, low-cost solution to monitoring network traffic. Administrators can remotely switch from a central location between network segments and actively monitor and analyze both directions of data. For seamless security, access control and management of your network infrastructure, APCON's INTELLAPATCH 64/144 switches provide the first layer of defense from any network to any network. SERVICES FOR REMOTE ACCESS, CONTROL AND MONITORING Benefits � Lower operations and equipment cost � Improve network failure response time � Maintain 24/7 access to remote network and lab facilities � Improve QOS monitoring and SLA compliance Applications � Manage network elements and physical connections from one central location � Schedule and access lab resources from a different building or corporate location � Analyzer insertion to different network segments � Amplification for fiber taps � Traffic mirroring to redundant IDS systems � Security for remote connects and disconnects � Packet and performance monitoring (data centers, web hosting, ISPs) Features � Monitor network segments by timed intervals or pre-set times � Intrusive and non-intrusive monitoring (port mirroring) Test Lab Remote Access Simulation � LAN TCP/IP port and two Serial ports for remote access Remote Management and Analysis Simulation APPLICATION FOR MONITORING SOFTWARE GUI Data Specifications APCON’s CONTROL Software MODELS: ACI-2052-C64-1: 64 Port Chassis (requires blades & SFP’s) ACI-2054-C00: 144 Port Chassis (requires blades & SFP’s) ACI-2052-F64-3: 1 & 2 Gb/s Fibre Channel 64 Port* ACI-2052-I64-3: OC-48 ATM/SONET 64 Port* Fibre Channel, Gigabit Ethernet, OC-3, 12 and 48 Blades are Available Analyzer Insertion for Non-Intrusive Monitoring * SFP transceivers are required SYSTEM OVERVIEW FEATURES Physical (Continued): Operating Temperature 0° to 50°C Protocols / Data Rates: Storage Temperature -40° to 85°C Fibre Channel 1.0625 and 2.125 Gb/s Operating Humidity 5% to 90% RH (non-condensing) Gigabit Ethernet 1.250 Gb/s Storage Humidity 0% to 95% RH (non-condensing) Fast Ethernet 100 Mb/s MTBF 150,000 hrs SONET/SDH (ATM, IP, Frame Relay over SONET/SDH) Power Supply: OC-3 155 Mb/s Dual-Redundant Hot Swappable AC Power connectors OC-12 622 Mb/s OC-48 2.488 Gb/s Serial Interface: 9600/19200 baud, 8/N/1, 15 meters (50 ft.), DB-9 Architecture: Ports 64 or 144 non-blocking, layer 1 ports LAN Port: Modules 4 or 9 - 16 Port Plug-in Hot Swappable Modules TCP/IP, 10 Mbits/sec, RJ-45 SFP Transceiver Options: Control Software: Fiber Optic: Graphical User Interface: Multimode or Singlemode duplex LC transceivers available for Windows most data rates Command Line Utility: Windows, Solaris, Linux Copper: Solaris source code for porting to other operating systems. Fibre Channel only Copper HSSDC-2 Transceiver 1 Gb/s and 2 Gb/s Max. Other Control Options: Copper Cable Length 17 meters (Max.) SNMP (MIB and Agent Available) Socket and Serial port direct using ASCII Physical: commands Mechanical: INTELLAPATCH 64 19" W x 13.6"D x 6.91"H (42.52 cm W x 34.54 cm D x 17.55 cm H) INTELLAPATCH 144 19" W x 14.5"D x 13.9"H (48.3 cm W x 36.8 cm D x 35.3 cm H) Corporate Headquarters Rackmount: www.apcon.com INTELLAPATCH 64 4U Industry Standard Regional Sales Office info@apcon.com INTELLAPATCH 144 8U Industry Standard sales@apcon.com Tel: +1 503 639 6700 Weight: (Not Populated with SFP's) Tel: +1 843 573 0000 Fax: +1 503 639 6740 Fax: +1 843 573 0210 17938 Upper Boones Ferry Road INTELLAPATCH 64 18.0 pounds (8.16 Kg) Portland, Oregon 97224 USA Charleston, SC USA INTELLAPATCH 144 32.0 pounds (14.5 Kg) Power: 2002 Apcon, Inc. All Rights Reserved. Apcon, IntellaPatch, AutoSwitch, PowerLink INTELLAPATCH 64 90-260 VAC 50-60 Hz (5A max.) 133 Watt are trademarks of Apcon, Inc. Data Spec Sheet INTELLAPATCH 144 90-260 VAC 50-60 Hz (6A max.) 550 Watt