The Leader in Physical Layer Switching and Automation TM INTELLAPATCH BLADES 10-GIGABIT. This blade family features three models IntellaPatch Blades supporting 10 Gb/s Fibre Channel, 10 Gb/s Ethernet. These blades are designed with four ports, enabling FIBRE CHANNEL. Apcon’s best selling blades support 1, 2 engineers to switch these next-generation data rates with & 4 Gb/s Fibre Channel. These 16-port blades are a must ease. All models accept singlemode XFP transceivers. have in any development and test environment for Storage Area Network (SAN) manufacturers. T1/E1/J1. APCON’S T1/E1/J1 multi-rate, 8-port blade, which comes standard with RJ-48C connectors, addresses 100/1000 ETHERNET & FDDI. The 100/1000 Ethernet one of the most commonly deployed protocols and cost- blade, with 16 ports per blade, supports Fast Ethernet and effective means of linking voice and data. The T1/E1/J1 Gigabit Ethernet. This blade is designed for fiber optic blade is ideal for use in interoperability test labs where applications, although it can also be used along with the engineers are performing signal breaks and stress tests on 10/100/1000 copper Ethernet blade for Gigabit Ethernet T1/E1/J1 infrastructure equipment. media conversion. The same blade supports FDDI at 100 MULTI-PROTOCOL. Ideal for Mb/s depending on the environments requiring flexibility, installed SFPs. Apcon’s multi-protocol, multi-rate blade supports Fibre Channel, 10/100/1000 COPPER Fast Ethernet, Gigabit Ethernet, ETHERNET. This advanced FDDI, SONET (OC-3/12/48), 16-port blade simultaneously NTSC/PAL, HDTV, ESCON and supports Ethernet, Fast Infiniband depending on the SFP Ethernet and Gigabit Ethernet installed. This blade supports data rates ranging from 100 over copper using RJ-45 copper connectors. An APCON Mb/s to 3.2 Gb/s. switch populated with Ethernet blades has the ability to convert an incoming copper link to a fiber link, and vice DS3/E3/STS-1. Multi-rate 8-port blade, which comes versa. standard with a mini-BNC TX and a mini-BNC RX connector for each of the 8 bi-directional ports. This blade can be used SONET/SDH. APCON’S SONET/SDH 16-port blade supports in any DS3/E3/STS-1 environment where the typical physical OC-3, OC-12 and OC-48. The multi-rate blade supports all layer applications are required, including; cable break three data rates simultaneously, or independently, based on simulation, equipment reconfiguration and test equipment the installed SFP transceivers. Each blade can be purchased sharing. with a mixture of transceivers that support all three data rates or may be populated with transceivers supporting only one data rate. APCON Physical Layer Switches The INTELLAPATCH 16, 64 and 144 switch models are based on a modular design that allows network administrators and engineers to manage multiple protocols and data rates in a single chassis. Each hot-swappable blade uses either SFP/XFP transceivers or RJ-45/RJ-48C connectors, giving users a flexible solution for Layer-1 connectivity and switching. One of the benefits of a bladed system is that each switch chassis can be populated with different blades. For example, an INTELLAPATCH 64 chassis can be managed as a single device while housing four different blades: SONET, Fibre Channel, T1/E1/J1 and copper Ethernet. This hot-swappable design provides a flexible connectivity platform ideal for use in lab environments where engineers need to test multiple protocols and data rates. The scalable architecture of INTELLAPATCH Switches allows for the accommodation of future port capacities and data rates. In addition, the bladed switch provides a cost effective means of media conversion, such as copper to fiber or multimode to singlemode. The Leader in Physical Layer Switching and Automation Specifications T1/E1/J1 FIBRE CHANNEL Ports: 8 per blade Ports: 16 per blade Data Rates Supported: T1/J1: 1.544 Mb/s Data Rates Supported: 1.0625, 2.125 and 4.250 Gb/s E1: 2.048 Mb/s Models: Model: ACI-2052-F16-1C: 1 & 2 Gb/s Copper ACI-2052-T08-1: T1/E1/J1 ACI-2052-F16-1M: 1 & 2 Gb/s Multimode ACI-2052-F16-1S: 1 & 2 Gb/s Singlemode MULTI-PROTOCOL ACI-2052-F16-5M: 1, 2 & 4 Gb/s Mulitmode Ports: 16 per blade ETHERNET Data Rates Supported: 100 Mb/s to 3.2 Gb/s Supports: Singlemode and Multimode Ports: 16 per blade Optics Data Rates Supported: 10 Mb/s, 100 Mb/s, 1.25 Gb/s Model: Models: ACI-2052-M16-1: Multi-Protocol ACI-2052-E16-2: 10/100/1000 Mb/s Copper Ethernet ACI-2052-E16-1M1: 100 Mb/s Fiber Ethernet DS3/E3/STS-1 ACI-2052-E16-1M2: 1.25 Gb/s Fiber Ethernet Ports: 8 per blade FDDI Data Rates Supported: 44.7 Mbps/34.3 Mbps/51.8 Mbps Ports: 16 per blade Model: Data Rates Supported: 100 Mb/s ACI-2052-D08-1 Model: ACI-2052-E16-1M3: 100 Mb/s FDDI 10-GIGABIT FIBER OPTIC OPTIONS Ports: 4 per blade Data Rates Supported: 10 Gb/s Ethernet SFP Transceivers 10 Gb/s Fibre Channel Multimode: Fibre Channel, Fast Ethernet, Gigabit Ethernet, FDDI, SONET (OC-3, OC-12) Models: ACI-2052-E04-3S: Ethernet Singlemode Singlemode: Fibre Channel, Gigabit Ethernet, FDDI, ACI-2052-E04-3M: Ethernet Multimode SONET (OC-3, OC-12, OC-48) ACI-2052-F04-3S: Fibre Channel Singlemode XFP Transceivers SONET/SDH Singlemode: Ethernet, Fibre Channel (10 Gb/s) Ports: 16 per blade Data Rates Supported: OC-3: 155 (166 FEC) Mb/s, Copper Options OC-12: 622 (666 FEC) Mb/s Fibre Channel, 10/100/1000 Ethernet, T1/E1/J1, OC-48: 2.488 (2.6 FEC) Gb/s DS3/E3/STS-1 Models: ACI-2052-I16-3M1: OC-3 Multimode ACI-2052-I16-3S1: OC-3 Singlemode ACI-2052-I16-3M2: OC-12 Multimode ACI-2052-I16-3S2: OC-12 Singlemode ACI-2052-I16-3S3: OC-3, OC-12, OC-48 Singlemode www.apcon.com Corporate Headquarters 17938 Upper Boones Ferry Road info1@apcon.com Portland, Oregon 97224 USA Tel: +1 503 639 6700 Fax: +1 503 639 6740 2005 Apcon, Inc. All Rights Reserved. Apcon, IntellaPatch, IntellaZone are trademarks of Apcon, Inc. DS102-1-20E-MAY05