ACTIS COMPUTER VSBC-6872
Specifications
CPU
Motorola PowerQUICC II MPC8270
Form Factor
6.3 X 9.2 in
Processor
Motorola MPC8270
Features
- 1 MByte SRAM
- 128 MByte SDRAM
- 16 MByte FLASH
- 2 x S-ATA hard disk drive
- 3 x Fast Ethernet ports
- 4 x multi-protocol serial ports
- CompactFlash
- One 32-bit PMC slot
- PowerQUICC II MPC8270
- RTC & 32 kByte SRAM battery backed up
- VMEbus interface 32bits
Datasheet
Extracted Text
VSBC – 6872/450 VME SINGLE BOARD COMPUTER WITH POWERQUICC II Features ® • PowerQUICC II MPC8270 • VMEbus interface 32bits • 128 MByte SDRAM • 16 MByte FLASH • 1 MByte SRAM • 3 x Fast Ethernet ports • 4 x multi-protocol serial ports • One 32-bit PMC slot Network and serial communication links VSBC-6872 VME PowerQUICC II • RTC & 32 kByte SRAM The VBSC-6872 offers a variety of on-board Single Board Computer is based on the battery backed up I/O: MPC8270 processor. This processor is rated • Three integrated Fast Ethernet ports at 855 DMIPS @ 450 MHz and includes a • CompactFlash (10BASE-T / 100BASE-TX). very efficient SDRAM controller. • One RS-232 console is available for user • 2 x S-ATA hard disk drive general purpose operations. One of the key features of this device is the 2 availability of a Quad Integrated • One RS-232, one SPI bus, and one I C serial links are available on an internal Communications Controller (QUICC). It connector. provides a dedicated module containing a RISC CPU and DMA channels for efficiently • Four RS-232 or RS422/485/V.35 serial ports handling a wide range of standard or available on the front panel. proprietary communications protocols. Flexible I/O VME interface The board also contains one 32-bit, 33/66MHz 3 The VSBC-6872 board includes a 32-bit VME PMC (PCI Mezzanine Card) site. This site can interface (rev C) : be used for system I/O, supporting industry- • Master : A32/A24/A16/D32/D16/D8, RMW standard PMC cards as interfaces to a wide variety of devices • Requester : RWD, ROR, FAIR, programmable request level Software • Slave : A24/A16/D32/D16/D8, RMW Developers can take advantage of the • Arbiter : SGL, PRI, RRS.prog. timeout VSBC-6872's power and performance when • Handler : D8(O), IH(1-7) running major real-time operating systems • Interrupter : D8(O), ROAK, I(1-7) (RTOS) or when deploying applications based • Bus Timer : BTO(16 to 112) on the low-cost, open-source Linux ™ operating • Mailbox functionality system. RTOS supported by the VSBC-6872 • 1 MByte - SRAM shared ® include VxWorks and others on request. 1 • DMA channel Note 1 : The VME DMA channel is a functionality Storage features developed by Actis Computer. It allows data transfer The VSBC-6872 board provides two media between the shared SRAM and an address on the storage possibilities : VME bus. 2 Note 2 : Not available in industrial temperature. • A dual S-ATA hard disk drive. Note 3 : Dependant on the MPC8270 settings • A CompactFlash extension. www.actis-computer.com VME VSBC-6872/450 Shared SRAM RTC / SRAM Flash Flash EEPROM 32KB battery backed up 8 MB Bank 0 8 MB Bank 1 1MB 32 bits Compact Flash Front RS-232 Panel Interface RJ-45 60x bus FPGA 3 x PowerQUICC II Front 10/100 Front 10/100 Front 10/100 SDRAM Panel Ethernet Panel Ethernet MPC8270 Panel Ethernet 128MB/64-bit RJ-45 PHY RJ-45 PHY RJ-45 PHY 450 MHZ Internal 4 x PCI S-ATA connectors Front RS-232 RS-232 RS-232 RS-232 Panel RS-485 RS-485 RS-485 RS-485 SCSI Interface PMC Interface Connection on the VME Interface Interface VME P2 VME P1 backplane slot A Features Peripherals IEEE1386.1 slot ® • Motorola PowerQUICC II • Real-time clock & 32 kByte • One 32-bit PMC slot 3 MPC8270 SRAM battery backed up • Up to 66 MHz compatible • 855 DMIPS @ 450 MHz • I2C memory • Up to 256 MByte SDRAM Environmental JTAG port Operating • Up to 32 MByte FLASH One internal connector for direct - Commercial : 0 to +70 °C • Up to 2MByte shared SRAM access to the processor with third - Industrial : -25°C to +85°C party tool. Non-operating : -40°C to 85 °C Communication Airflow requirement 10 CFM • Three Fast Ethernet ports on VME interface Relative Humidity 0 to 90 % the front panel (non-cond.) • Master : A32/A24/A16/D32/D16/D8 • One RS-232 console port on Altitude 0 to 10’000 ft • Requester : RWD, ROR, FAIR, the front panel programmable request level • One RS-232 auxiliary serial Environmental • Slave : A24/A16/D32/D16/D8 port on an internal connector. Dimensions 6.3 in x 9.2 in • Arbiter : SGL, PRI, RRS • Four high-speed serial port Power TBD • Handler : IH(1-7) supporting RS-232/422/485 Vibration 0.5G RMS mode on the front panel. • Interrupter: I(1-7) 20-2000 Hz random • Bus Timer : BTO() Shock 20 G, 11 ms, ½ sine Storage • Mailbox functionality 1 • CompactFlash • One DMA channel • Dual S-ATA hard disk interface (S-ATA 1.0) Distributed by: ACTIS Computer SA ACTIS Computer Inc 19 ch. Du Champ-des-Filles 6202 South Maple Ave, Suite 120 CH - 1228 Plan-Les-Ouates, Switzerland Tempe, Arizona 85283,USA Tel: +41 (22) 706 1830 Tel: (480) 838 1799 Fax: +41 (22) 794 4391 Fax: (480) 838 4477 For ordering information, please visit our web site at www.actis-computer.com .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ® PowerQUICC is a registered trademark of Motorola Corp. Other products mentioned may be trademarks or registered trademarks of their respective holders. ACTIS Computer believes this information is accurate as of its publication date and is not responsible for any inadvertent errors. The information contained herein is subject to change without notice. Copyright © 2003 ACTIS Computer. Edition 1.8 VME BUS
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the VSBC-6872 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods