ACTIS COMPUTER VSBC-6848
Specifications
CPU
Motorola PowerQUICC II MPC8246
Ethernet
Two Fast Ethernet Ports.
Processor
Motorola MPC8248
Features
- 1 MByte dual-port SRAM
- 16 MByte FLASH
- 2 x Fast Ethernet ports
- 2 x HDLC Controllers
- 2 x Serial-ATA interfaces
- 32-bit VMEbus interface
- 8-bit user GPIOs
- One CompactFlash slot
- One USB master port
- PowerQUICC II MPC8248 @ 400 MHz
- Real-Time Clock
- SDRAM SO-DIMM module
- Security engine
- Supplied with ECMON boot loader and debugger
- Two 32-bit @ 33 MHz PMC slots
- VxWorks and Linux RTOS support
Datasheet
Extracted Text
VSBC – 6848 VME POWERPC SINGLE BOARD COMPUTER Features ® • PowerQUICC II MPC8248 @ 400 MHz • Security engine • 32-bit VMEbus interface • SDRAM SO-DIMM module • 16 MByte FLASH • 1 MByte dual-port SRAM • 2 x Fast Ethernet ports • 2 x HDLC Controllers • One USB master port Network and serial communication links VSBC-6848 VME PowerQUICC II • 8-bit user GPIOs The VBSC-6848 offers a variety of on-board Single Board Computer are based on the communication I/Os: • Two 32-bit @ 33 MHz MPC8248 processor. This processor is rated • Two Fast Ethernet ports (10BASE-T / at 760 DMIPS @ 400 MHz. PMC slots 100BASE-TX) • One USB master interface One of the key features of this device is the • Real-Time Clock • One RS-232 console is available for user availability of a Quad Integrated general purpose operations Communications Controller (QUICC). It • One CompactFlash slot • Two RS422/485 HDLC serial ports provides a dedicated module containing a RISC CPU and DMA channels for efficiently • 2 x Serial-ATA interfaces Flexible I/O handling a wide range of standard or The board also contains two 32-bit, 33 MHz proprietary communications protocols. • Supplied with ECMON boot PMC (PCI Mezzanine Card) sites. These slots loader and debugger can be used for system I/O, supporting VME interface industry-standard PMC cards as interfaces to a The VSBC-6848 board includes a 32-bit VME • VxWorks and Linux wide variety of devices interface (rev C) : RTOS support • Master : A32/A24/A16/D32/D16/D8, RMW Software • Requester : RWD, ROR, FAIR, Developers can take advantage of the programmable request level VSBC-6848 power and performance when • Slave : A24/A16/D32/D16/D8, RMW running major real-time operating systems • Arbiter : SGL, PRI, RRS. prog. timeout (RTOS) or when deploying applications based • Handler : D8(O), IH(1-7) on the low-cost, open-source Linux ™ operating • Interrupter : D8(O), ROAK, I(1-7) system. RTOS supported by the VSBC-6848 ® • Bus Timer : BTO(16 to 112) include VxWorks and others on request. • Mailbox functionality Include ECMON boot loader and debugger • 1 MByte dual-port SRAM software. • DMA channel Storage interface The VSBC-6848 supports one removable CompactFLASH slot for true IDE media card, and two S-ATA HDD interfaces. www.actis-computer.com VME VSBC-6848 8-bit Dual-port Flash #0 Flash #1 EEPROM RTC GPIOs 1 MByte 8 MByte 1 MByte SRAM I2C Front RS-232 Panel Compact Interface RJ-45 Flash 2 x Front 10/100 Front 10/100 Front 10/100 60x bus FPGA Panel Ethernet Panel Ethernet Panel Ethernet RJ-45 PHY RJ-45 PHY RJ-45 PHY SO-DIMM SDRAM PowerQUICC II Front MPC8248 dual Internal PCI Panel USB S-ATA connectors USB PMC 2 x slot B RS-232 RS-232 RS-232 RS-422 RS-485 Internal RS-485 RS-485 RS-485 Interface Interface PMC Interface Interface I/Os connection VME P2 VME P1 slot A * VSBC-6848 only Features Storage JTAG port ® • Motorola PowerQUICC II • CompactFlash for true IDE • JTAG interface support for MPC8248 (HIP7 0.13 μm) card software debugging and testing purposes • 760 DMIPS @ 400 MHz • Two S-ATA HDD interfaces • • Security engine IEEE1386.1 slot Peripherals • SO-DIMM SDRAM module • Two 32-bit PMC slots • Real-time clock • 16 MByte FLASH • Up to 33 MHz • I2C memory for VPD information • 1 MByte dual-port SRAM • 8-bit user GPIOs • 256 kbit serial EEPROM for Environmental user application Operating VME interface - Commercial : 0 to +55 °C • Master : A32/A24/A16/D32/D16/D8 Communication Non-operating : -40°C to 85 °C • Requester : RWD, ROR, FAIR, • Two Fast Ethernet ports on Airflow requirement 10 CFM programmable request level the front panel Relative Humidity 0 to 90 % • Slave : A24/A16/D32/D16/D8 • One RS-232 console port on (non-cond.) • Arbiter : SGL, PRI, RRS Altitude 0 to 10’000 ft the front panel • Handler : IH(1-7) • Two high-speed serial port Environmental supporting RS-422/485 mode • Interrupter: I(1-7) Dimensions 6.3 in x 9.2 in • One USB master interface • Bus Timer : BTO() Power typ. 6 W • Mailbox functionality Vibration 0.5G RMS • One DMA channel 20-2000 Hz random Shock 20 G, 11 ms, ½ sine Distributed by: ACTIS Computer SA ACTIS Computer Inc 19 ch. Du Champ-des-Filles 6202 South Maple Ave, Suite 120 CH - 1228 Plan-Les-Ouates, Switzerland Tempe, Arizona 85283,USA Tel: +41 (22) 706 1830 Tel: (480) 838 1799 Fax: +41 (22) 794 4391 Fax: (480) 838 4477 For ordering information, please visit our web site at www.actis-computer.com .................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... ® PowerQUICC is a registered trademark of Motorola Corp. Other products mentioned may be trademarks or registered trademarks of their respective holders. ACTIS Computer believes this information is accurate as of its publication date and is not responsible for any inadvertent errors. The information contained herein is subject to change without notice. Copyright © 2003 ACTIS Computer. Edition 1.7 VME BUS
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the VSBC-6848 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods