Highlights ZT 5503 ¨ 850 MHz Pentium III processor— System Master Low Power (BGA2) ¨ 512 Mbytes to 1 Gbyte ECC SDRAM ® ¨ Intel 440 GX chipset ¨ 64-bit, 33 MHz CompactPCI interface PENTIUM III PROCESSOR ¨ Onboard Flash memory ¨ EIDE hard drive and PMC site ® This CompactPCI System Master is designed for telecommunications and Internet applications requiring completely integrated multiprocessing solutions for increased performance and system reliability. Optionally, it can operate in a peripheral slot in ¨ Standard PC/AT peripherals drone mode, whereby it does not communicate on the CompactPCI bus. This option permits use of the ZT 5503 as a stand-alone computer in a peripheral slot. ® The high performance of the ZT 5503 comes from the Pentium III processor and the ¨ Dual onboard Fast Ethernet CompactPCI bus. Support for major operating systems and real-time software speeds application development. A generous set of onboard embedded features and the 6U Eurocard mechanical form factor address the system integration and reliability ¨ Dual Universal Serial Bus (USB) requirements of OEM system builders. ® ¨ Optional CompactFlash support Key Design Elements Multiprocessing Support ¨ Supports 5V CompactPCI signaling environment The ZT 5503 functions as a 6U system processor in a CompactPCI multiprocessing system (compactnet). The ZT 5503 interfaces to the CompactPCI backplane through a transparent, PCI-to-PCI (P2P) bridge, allowing it to communicate directly with all peripheral CPU boards in the system via the CompactPCI bus. ® ¨ Compliant with PICMG 2.0 R3.0 (CompactPCI) and 2.1 R2.0 (Hot- Swap) specifications ® ® ¨ Support for Windows 2000, Linux ® and VxWorks Pentium III Processor The 850 MHz Pentium III processor—Low Power provides excellent Regulatory Compliance computing power for the embedded system designer, incorporating a 100 MHz processor side bus and 256 Kbytes of L2 cache. The ZT 5503 may NEBs Compliant be configured with a companion rear-panel transition board (ZT 4804 or ZT 4806) specifically designed to support the available I/O signals. CE Certification The ZT 5503 meets intent of Directive 89/336/EEC for Electromagnetic Compatibility & Low-Voltage Directive Drone Mode 73/23/EEC for Product Safety. Compliance was demonstrated The ZT 5503 is designed to optionally operate in a peripheral slot. In this to the following specifications as listed in the Official Journal mode, it receives power but does not communicate on the CompactPCI of the European Communities: bus. Onboard logic qualifies its location when inserted into a peripheral slot, thereby isolating the board from the CompactPCI bus. Safety ¨ UL/cUL 60950 Safety for Information Technology Equipment ¨ EN/IEC 60950 Safety for Information Technology Standard Features Equipment ¨ CB Report Scheme CB certificate and Report Memory Emissions Test Regulations All RAM options for the ZT 5503 are Error-Correcting Code (ECC) SDRAM ¨ FCC Part 15, Subpart B for improved reliability and data integrity, and the board supports memory ¨ EN 55022 options from 512 Mbytes to 1 Gbyte. The Pentium III processor contains ¨ CISPR 22 integrated L1 and L2 cache memory. ¨ Bellcore GR-1089 EN 50081-1 Emissions Flash Memory and CompactFlash ¨ GR-1089-CORE Sections 2 and 3 The ZT 5503 includes 4 Mbytes of onboard Flash memory. The flash ¨ EN 55022 Class A Radiated memory supports the system BIOS, which is field-upgradeable, and the ¨ EN 55022 Power Line Conducted Emissions additional flash memory may store a bootable operating system image. ¨ EN 61000-3-2 Power Line Harmonic Emissions Additional Flash memory capacity may be added with a CompactFlash ¨ EN 61000-3-3 Power line Fluctuation and Flicker carrier mezzanine card, provided as an accessory and available in lieu of a hard drive. This rugged, solid-state storage solution provides complete EN 50024 Immunity software compatibility with operating systems and applications, which support ¨ GR-1089-CORE Sections 2 and 3 standard IDE devices. ¨ EN 61000 4-2 Electro-static Discharge (ESD) ¨ EN 61000 4-3 Radiated Susceptibility ¨ EN 61000 4-4 Electrical Fast Transient Burst Ethernet ¨ EN 61000 4-5 Power Line Surge Two Ethernet ports deliver high networking performance via onboard 10/100 ¨ EN 61000 4-6 Frequency Magnetic Fields Mbps Ethernet LAN interfaces. Either 10 or 100 Mbit Ethernet protocols ¨ EN 61000 4-11 Voltage Dips, Variations, & Short are available through auto-configuring RJ-45 front-panel connectors. Link Interruptions and activity status LEDs provide Ethernet operation, and two additional Ethernet ports are located on the rear panel. Hard Drive and PMC Site A 20 Gbyte EIDE hard drive is mounted on the ZT 5503 in the standard product configuration. Space remains on the baseboard, and connectors are provided for a single PMC card. Watchdog Timer An onboard, two-stage watchdog timer is provided for system integrity. Once enabled, failure to strobe the watchdog timer within a programmable time period (1s, 8s, 64s, 256s) generates a non-maskable interrupt (NMI or processor "INIT"), followed by a hardware reset. Video An onboard SVGA-compatible graphics controller, CHPS 69000, is included with video connectors provided on the front plate. Software and Support Specifications The ZT 5503 is compliant with the following specifications: The ZT 5503 comes standard with an embedded BIOS loaded in ¨ CompactPCI Core Specification, PICMG 2.0, R3.0 onboard Flash. The BIOS is user-configurable to boot an operating ¨ CompactPCI Hot-Swap Specification, PICMG 2.1, R2.0 system residing in local flash memory, from a fixed or floppy drive, or over a network. The ZT 5503 is PC-compatible and will run Power Req. (Typical) Supply Voltage, Vcc (+5VDC +5%, -3%) operating systems developed for the PC. Enhanced support is also Supply Current, Vcc=5.0VDC (4A) provided for Windows 2000, Linux and VxWorks, including additional Supply Voltage, V3.3V (+3.3VDC +5%, -3%) drivers for select peripherals and flash drives. Supply Current, V3.3V=3.3VDC (6A) Supply Voltage, V12.0V (+12VDC +/-10%) Supply Current, V12V=12.0B (20mA) Warranty Mechanical One year Measures 9.2” x 6.3 (233.35mm x 160mm) Width: 0.8" (1 slot - 4HP) Connector: IEC-1076-4-101 (J1-J5) Environmental Operating Temperature (requires 200 LFM airflow): 0 to 50 C Storage Temperature: (with hard disk) -40 to +65 C (without hard disk) -40 to +85 C Non-Condensing Relative Humidity: less than 95% at 40 C Peripherals and I/O Interfaces I/O Interface Front Panel Rear Panel Compat. COM 1 RJ-45 J3 16550 COM 2 N/A J3 16550 LPT 1 N/A N/A IEEE 1284 VGA 15-pin D-shell N/A with AGP Keyboard N/A J3 PS/2-style Mouse N/A J3 PS/2-style Floppy N/A J3 PC/AT EIDE 2.5” J3 ultra DMA/33 Ethernet (2x) RJ-45 J3 Intel 82559 USB 0 4-pin USB N/A USB Type A USB 1 4-pin USB J3 USB Type A Custom configuration options may be available. Contact Sales Support for more information. Ordering Information The ZT 5503 System Master Processor Board may be ordered with the following options: Processor Configurations ¨ ZT 5503C-1A: 850 MHz Pentium III processor—Low Power, 512 Mbytes ECC SDRAM, EIDE 20 Gbyte HD and SVGA ¨ ZT 5503C-1B: 850 MHz Pentium III processor—Low Power,1 Note: To provide proper cooling to the ZT 5503, each unused slot in Gbyte ECC SDRAM, EIDE 20 Gbyte HD and SVGA the chassis should be populated with an air management blade. All rear slots should be populated with a rear filler panel. See the list below Accessories for orderable components: ¨ ZT 4804: Rear-Panel Transition Board ¨ ZT 4806: Rear-Panel Transition Board ¨ 19635:IDE CompactFlash Carrier ¨ To cover a single rear panel slot, use a filler panel that is 6U x 4HP (horizontal pitch=0.2") (Performance Technologies PN 18299). Product Information and Sales Support ¨ To cover six rear panel slots, use a filler plate that is 6U x 24HP ¨ 805-783-6004 (Performance Technologies PN 20434). ¨ ztsupport@pt.com ¨ To fill a front slot, use an air management blade that is 6U X 4HP (Performance Technologies PN 20456). ¨ To fill a power supply bay, use an air management blade that is 205 Indigo Creek Drive ¨ Rochester, New York 14626 3U X 8HP (Performance Technologies PN 20455). Tel: 585-256-0200 ¨ Fax: 585-256-0791 ¨ www.pt.com ¨ To fill an SM slot, use a filler panel that is 3U X 4HP (Performance Technologies PN 18309). 05/21/03 Specifications subject to change without notice. All brands or names mentioned herein are trademarks of their respective holders.