Optical Spectrum Analyzer AQ-6315A/-6315B The Next Standard This equipment is available in two specification depending The AQ-6515A/-6315B optical spectrum analyzer on the presence of the optical function brings advanced capabilities to a wide range of applications, from light source evaluation to MODEL OPTICAL OUTPUT FUNCTION measurement of loss wavelength characteristics in optical devices. Featuring significant upgrades AQ-6315A NO from the basic performance and functions of the AQ-6315B YES prior AQ-6312A/-6312B models, they incorporate a totally new monochrometer design. In spite of the compact case, they support single-pass/double- pass monochrometer mode select. In the double-pass monochrometer mode dynamic range is improved far beyond what it has even been before. In the single-pass monochrometer mode it supports the same wide range of applications as the prior models. The AQ-6315A/-6315B, bringing the full selection of advanced Ando spectrum analyzer technology to your work…. a new standard for the industry. MAJOR FEATURES Diverse analysis functions Analysis functions for WDM and other optical devices (LD, LED, FBG, etc.). High wavelength accuracy Provides ±0.05 nm wavelength accuracy in the 1550 nm band, with ±0.02 nm wavelength linearity, makes it especially useful for WDM devices, such as high-precision loss wavelength characteristic evaluation. Monochromator select mode The monochro mode can be set to single-pass or double-pass to match your measurement application needs. High sensitivity over a wide band Covers from 350nm to 1750nm and noise level has been suppressed to allow the AQ-6315A/-6315B to measure light at down to –90Bm Low polarization dependency Polarization dependency has been slashed to ±0.05dB, enabling accurate measurement of optical amplifier gain and other critical measurements. High-level accuracy Accurate to within ±0.3dB. High-power measurement: Max.+20dBm (100mW) Even high power output from an optical amplifier can be measured directly without an optical attenuator High wavelength resolution Achieves wavelength resolution of 0.05nm. Optical output is provided (AQ6315B only) Can be used as an optical bandpass filter. Three individual trace memories Pulsed light can be measured 9.4-inch color LCD Manual-Free Operation 1-9.4-inch color liquid crystal display Displays all information such as measurement waveforms, measurement conditions and measured data. 2-Function keys and window menus Used to select and execute various measurement conditions, corresponding to main functions switches. 3-Main function select switch All measurement settings 4-Data entry selection Used to input data, such as rotary knob, step key and ten-key pad. 5-Optical input connector 6-3.5-inch floppy disk drive Supports both 1.2MB and 1.44MB disks. Data can be saved on both text file and graphic file (BMP, TIFF) formats. 7-Intensity Adjust the display intensity. 8-Power switch 9-Help key Used to verify the actions of various function keys. 10-Used to output data to the internal printer and external plotter. 11-Internal printer Used to quickly output screen had copies. Application WDM device characteristics evaluation This system calculates key data such as peak wavelength, frequency separation, peak level and SNR for each channel for up to 99 channels, based on the WDM transmission optical spectrum. SNR is the difference between level and noise level for each channel peak. Optical fiber amplifier (EDFA) characteristic evaluation The ASE interpolation method is used to measure gain and NF, key parameters for optical fiber evaluation. When used with the AQ8423A/8423B optical amplifier analyzer, the system can accurately measure gain and NF with the pulse method, which is optimum for evaluation of WDM transmission optical fiber amplifiers. Example of measurement in combination with optical amplifier analyzer Application Parameter evaluation for LED, FP-LD and FB-LD. One-touch evaluation of key parameters for LED, FP-LD and DFB-LD such as side mode suppression ratio for DBF-LD. Color analysis color analysis for color PDP, color LCD, color CRT, and visible LED and LD. The spectral diagram can also be displayed Pulse light measurement Wide-region optical device evaluation Offers three pulse light measurement functions The level axis can be set to dBm/nm (power density: (LPF, peak hold, external trigger). Select the Power per nm) to display true wide-region light appropriate mode for your repeating frequency. source level, independent of resolution. Application Fiber grating characteristics evaluation When used in combination with the AQ2141 expansion frame and the AQ4310 (155) ASE unit. It is possible to evaluate performance such as notch width for fiber grating transmission spectrums. Optical filter loss evaluation When used in combination with the AQ4303B white light source and the AQ9314B parallel beam mount, it is possible to evaluate transmission characteristics of optical filters. (% Display) Optical fiber loss wavelength characteristics When used in combination with the AQ4303B white light source, it is possible to evaluate optical fiber loss-wavelength characteristics. Also the arithmetic function can convert optical fiber loss wavelength characteristics into loss per unit length for display. ANDO ELECTRIC CO.,LTD. 19-7, KAMATA 4-chome, Ota-ku, Tokyo, 144 japan Phone: (03)3733-1151 Fax (03)3739-7310 ANDO CORPORATION HEADQUARTERS: 2021 N. Capital Avenue, San Jose, CA 95132, U.S.A. Phone: (408)941-0100 Fax: (408)941-0103 EAST OFFICE: 7617 Standish Place, Rockville, MD 20855, U.S.A. Phone: (301)294-3365 Fax: (301)294-3359 ANDO EUROPE B.V. HEADQUARTERS: “Vijverdam”, Dalsteindreef 57, 1112XC Diemen, The Netherlands Phone: 020-6981441 Fax: 020-6998938 NIEDERLASSUNG DEUTSCHLAND: Dachauer StraBe 340,1. OG, D-80993 Muchen, Germany Phone: 089-1438150 Fax: 089-14381555 ANDO ELECTRIC SINGAPORE PTE.LTD. 19 Kim Keat Road #05-03, Jumbo Industrial Building, Singapore 328804 Phone: 251-1391 Fax: 251-1987 ANDO ELECTRIC INCORPORATION 5F-2, No 81, Nan-ta Road, Hsin-chu City, Taiwan Phone: (35)614131 Fax: (35)614130 Specifications Single-pass monochromator mode Double-pass monochromator mode Applicable fiber SM to 800mm diameter fiber SM, GI (50/62.5mm) Measurement wavelength range 350 to 1750nm Wavelength span 0 to 1500nm Wavelength accuracy ±0.5nm (25 ± 5°C, 10/125 SM fiber) ±0.05nm (1510 to 1570nm, 10/125 SM fiber) Wavelength linearity ±0.02nm (1510 to 1570nm, 10/125 SM fiber)[1] Wavelength reproducibility ±0.005nm (1 minute) Wavelength resolution 0.05 to 10nm -90 to +20dBm (1000 to 1600nm) -85 to +20dBm (1200 to 1600nm) Measurement level range [2] -85 to +20dBm (600 to 1000nm) -80 to 20dBm (600 to 1200nm) -75 to +20dBm (350 to 1750nm) -65 to +20dBm (350 to 1750nm) Level accuracy [3] ±0.3dB (at 633/1310/1550nm) Polarization dependency [4] ±0.1dB (at 1310/1550nm) ±0.05dB (at 1310/1550nm) Linearity [5] ±0.05dB (0 to -40dBm), ±0.2dN (0 to –60dBm) Level scale 0.1 to 10dB/div. And linear Dynamic range (stray light level) [6] 40dB (± 1nm, 633/1152/1523nm 70dB (± 1nm, 633/1152/1523nm) 35dB (± 0.5nm, 633/1152/1523nm) 60dB (± 0.5nm, 633/1152/1523nm) Sweep time [7] 0.5 s. or less (span 500nm or less) 2.5 s. or less (full span) Measurement Automatic measurement, marker-to-marker sweep measurement, averaging, pulsed light measurement function. Power meter function Display 3D display, split (dual) display Individual 3 trace Max./min. hold, data calculation (addition, subtraction, division), normalize, Functions memories Dominant, curve-fit display, power density display function, dBm/km, % level scale Data analysis Peak/bottom searches, specral width search, SMSR search. Marker to marker power measurement function, optical amplifier NF measurement function, color analysis function, WDM analysis function, notch width measurement function Other Program function (200 steps´20 programs), wavelength calibration function, calendar/date function, help function, user key define function, label function Resolution setting range: 0.05 to 10nm Optical output [8] Insertion loss: 20dB or less (1310/1550nm) Optical fiber: GI 50/125mm Memory FDD Traces, analysis data and programs on 3.5-inch FD (1.2/1.44Mbyte) Internal memory Traces and measurement conditions (32 traces), 20 programs Data Output Printer High-speed built-in printer Plotter Direct output to XY plotter GP-IB 2 ports Interfaces Other Sweep trigger input (TTL), sample trigger input (TTL), sample trigger output (TTL) Sample enable input (TTL), 270Hz output (TTL), analog output (0-5V), Video output (VGA compatable) Display 9.4-inch color LCD, resolution 640´480 dots Optical input connector FC (standard) SC, D4, W/E, ST, DIN, etc. Power requirements AC100V to 120V, 200V to 240V, 48 to 83Hz, approx. 200VA Operating temperatures: 5°C to 40°C Environment Storage temperatures: -10°C to 50°C Humidity: 80% or less (no condensation) Dimensions and mass Approx. 425 (W) ´222 (H) ´ 450 (W) mm, approx. 30kg Accessories Power cord: 1ea, 3.5-incn FD: 2ea, recording paper: 2ea, instruction manual: 1ea Note that device adapters, quartz cells for liquid measurement, parallel beam mounts, and white light sources are optional. Please consult with your vendor separately. *These specifications are for products delivered later than October 1997 NOTE: [1] After power-on and more than two hours of warm-up, within 24 hours from wavelength calibration with 1523nm HE-NE laser. [2] At 25 ± 5°C. Resolution 0.5nm or more. [3] 10/125 SM fiber, 25 ± 5°C, input level -30dBm or more [4] 10/125 SM fiber, 25 ± 5°C, resolution 0.5nm or more [5] 25 ± 5°C, sensitivity HIGH 3. [6] 10/125 SM fiber, 25 ± 5°C, resolution 0.05nm, excluding high-order and low0order harmonics [7] Single-trace display, sampling points: 501, sensitivity NORMAL HOLD. Average time: 1, no changes of diffraction order within sweep range except the full span [8] AQ6315B only Specifications are subject to change without notice.