○○○○○○○○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○○○○○○○○○ 1506 Heavy-Duty Industrial PC DS-140411(G) without Integrated Display F E A T U R E S � AGP graphics with base 4 MB system RAM � Automatically shares up to 32 MB with system RAM ® ® � Intel Pentium III options up to 1.26GHz � Up to 512 MB DRAM (256 MB standard) � 10/100 BaseT Ethernet port � Parallel, RS-232 and RS-232 or RS485, PS/2 keyboard and mouse ports � USB ports (1.1 compliant) � Four available expansion slots: � Three ¾-length (1 PCI, 1 ISA, and 1 either ISA or PCI) � One ½-length PCI � DOC 2000 socket � Floppy drive and CD-ROM drive (with optional CD-R/W/DVD-Read, and DVD-R/ W upgrade options) � Easily removable 40 GB hard drive � Secondary IDE Drive options (choice of one): � Dual hard drives Xycom Automation's newest generation of industrial PCs are de- � Externally accessible CompactFlash™ options up to 512MB signed and tested for the tough environments required for plant � UL Listed for hazardous locations: Class floor use. Our standard PC configurations meet the strict specifi- I Division 2, Groups A, B, C, D (not cations required for use in hazardous locations and Europe's CE available with CDW or DVD drive options); Temp. Code T5 mark. Based on CPU boards designed specifically for industrial ® ® � Pre-loaded with MS-DOS , Windows NT, automation, these systems provide the capabilities required by ® Windows 2000 (with multi-language ® demanding applications. With an installed base of over 200,000 support for 2000 only), or Windows XP systems, our industrial PC products are successfully applied in � 100-240 V AC power supply � 2-year warranty included manufacturing and process environments world-wide. ○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○ Optional 1.26GHz with 512K cache, available. Superior Video both running at 133 MHz bus is an Performance Meets High Standards available option. The on-board AGP graphics controller To survive on the plant floor, the 1506 defaults to 4 MB system RAM which Fits Your Needs meets FCC, UL, cUL, and European allows full color resolution up to 1280 x The 1506 can be configured many CE mark requirements for industrial 1024 resolution. In addition, the 1506 different ways. With four available automation equipment. Xycom will automatically share up to 32 MB expansion slots – three ¾-length (1 Automation leads the industry in system RAM to allow full 32-bit color PCI, 1 ISA, and 1 ISA or PCI), and reliability, service, and support with an depth and fast 3D rendering and one ½-length PCI, many cost effec- optional five year warranty available. graphics performance. tive, industry standard options are easily integrated. The optional dual Higher Performance hard drive, drives, solid state drive, or With up to 1.26 GHz Pentium III externally accessible CompactFlash processors available, the 1506 can provide the storage solution you drive the most demanding applications. require. Additionally the CD-ROM can The 1506 ships standard with a 1 GHz be upgraded to CD-R/W/DVD-Read, Socket 370 Pentium III with 256K or DVD-R/W, so that even more cache running at 133 MHz bus. storage and/or backup options are Page 1 SERVICEABILITY With the cover removed expansion cards are easily installed in the 1506 without cumbersome cables to contend with. MOUNTING OPTIONS Shelf Mounting Wall Mounting EASILY REPLACEABLE HARD DRIVE The 1506 has incorporated an easy access hard drive mount. Simply remove 2 screws and extract the hard drive. Remove the metal bracket and retention spring, attach it to the new hard drive and install your replacement. SECONDARY DRIVE OPTIONS The 1506 has several options for the secondary IDE port on the CPU. The hard drive can be replaced with a dual hard drive unit. If solid state storage media is desired than an externally accessible Type I or Type II CompactFlash™ option is available. Internal Solid State drives are also available. Dual 2.5" Hard Drives Externally Accessible CompactFlash™ Page 2 PRODUCT MOUNTING AND DIMENSIONS 1506 Unit Dimensions Shelf Mounting (E) 6.91” (175.5 mm) Model 1506 ® ® Processors Intel Celeron, Pentium III ® ® ® Preloaded OS MS-DOS , Windows NT , Windows 2000, XP Expansion One ISA, two PCI, one shared (ISA or PCI) (E) (D) (A) Wall Mounting (F) 10.72” (272.3 mm) (B) (C) (F) Model 1506 Height (A) 9.24” (234.7 mm) Width (B) 11.39” (289.3 mm) Width (C) 12.78” (324.6 mm) Depth (D) 5.48” (139.2 mm) Weight 13 lbs (7.2 kg) PRODUCT SPECIFICATIONS AND RATINGS Environmental Operating Nonoperating Thermal 0°C to 50°C -20°C to 60°C Humidity 20% to 80% RH, noncondensing 20% to 80% RH, noncondensing a Shock 15g peak acceleration, 11 msec duration 30g peak acceleration, 11 msec duration Vibration .006” peak to peak displacement .015” peak to peak displacement a 5-2000 Hz 1.0g maximum acceleration 2.5g maximum acceleration b Altitude Sea level to 10,000 ft. Sea level to 40,000 ft. a These values are with solid state hard drives and not rotating media drives. b Consistent with internal component specifications. Electrical Power Supply 150 watt AC c AC Power 100-120/200 - 240 V AC, switchable, 50/60 Hz, 2.5 Amp (maximum), 84 W nominal Available 38 watts maximum +5@8A Expansion Slot +3.3@5A Power +12@1.75A d -12@200mA d -5@200mA c Nominal Power is measured for a base configuration only. Any additional expansion and/or devices will increase the input power required. d -5V and -12V cannot exceed 2 watts. Page 3 PRODUCT SPECIFICATIONS AND RATINGS (CONT'D) Compliance Safety Agency Approvals: Regulatory Compliance: � UL 508 Listed FCC a,b � UL 1604 Listed � 47 CFR, Part 15, Class A � EN 55022: Class A � CSA-C22.2, #142 Listed � EN 61000-6-2 a,b � CSA-C22.2, #213 Listed � EN61000-3-2, CLass A a � EN61000-3-3 Class I Division 2, Groups A, B, C, D; Class II, Division 2, Groups F and G; Temp. Code: T5 b � IEC 60950-1 DCW & DVD Drives are not supported for hazardous locations. ORDERING INFORMATION To create an order number, follow the conventions defined by the example order numbers and product configurations. Example Order Number Order Number Description ® 1506-1000-256-CDF-2K 1506 Industrial “Node” PC, Socket 370 Intel Pentium III 1 GHz CPU (256K Cache, 133 MHz bus), 256 MB DRAM, 40 GB minimum Hard Drive, Rear Access CD-ROM and Floppy, Windows 2000, On-board 10/100 BaseT Ethernet and USB, three 3/4-length expansion slots (1 PCI, 1 ISA, and 1 ISA or PCI) and one 1/2-length PCI expansion slot. 1506 - Important Notice for XP CPU configurations: Certain 1000 Pentium III 1.0 GHz, 256k Cache, 133 MHz Bus Microsoft® software product(s) 1260 Pentium III 1.26 GHz, 512k Cache, 133 MHz Bus included with this computer DRAM may use technological measures -256 256 MB DRAM for copy protection. IN SUCH -512 512 MB DRAM EVENT, YOU WILL NOT BE Internal Hard Drive ABLE TO USE THE PRODUCT IF Blank Internal 3.5” 40 GB minimum EIDE hard drive YOU DO NOT FULLY COMPLY -80G 80 GB internal EIDE hard drive a WITH THE PRODUCT -ND No internal hard drive ACTIVATION PROCEDURES. -DHD Dual 2.5” 20 GB minimum hard drives b -4GSS 4 GB solid state hard drive Product activation procedures and Microsoft's privacy policy Rotating Media Devices will be detailed during initial -F Rear Access Floppy only -CDF Rear Access Floppy and CD-ROM launch of the product, or upon cfg -CDWDVDF Rear Access Floppy, CD-R/W with DVD read-only certain reinstallations of the cfg -DVDWF Rear Access Floppy and Read/Write DVD-ROM Drive software product(s) or reconfigurations of this b computer, or may be completed Externally Accessible IDE blank Nothing Installed by Internet or telephone (toll -CF Externally Accessible Type I/II CompactFlash site charges may apply). -128CF Externally Accessible Type I/II CompactFlash site w/128 MB -256CF Externally Accessible Type I/II CompactFlash site w/256 MB -512CF Externally Accessible Type I/II CompactFlash site w/512 MB Operating System Blank MS-DOS cg -NT Windows NT Warranty Information c -2K Windows 2000 (multi-language) c The 1506 series carries -XP Pre-activated Windows XP a two-year parts & a b 128CF, 256CF, or 512CF (with DOS) option must be chosen when selecting the -ND option Not recommended when applications c labor warranty. are storing data When ordering -CDWF, -DVDF, -DVDWF options with MS-DOS, drivers will not be loaded and devices will not function d e properly (requires Windows). Externally accessible options are not available when choosing -DHD option. Windows operating f systems are only available when Internal Hard Drive or -DHD options are chosen. Hazardous locations approvals do not apply when g configured with a DVD or DVD-R/W drive option. CDW, DVD, and DVDW options are not available with Windows NT. Xycom Automation Customer Support Hotline: 734-429-4971 734-944-0482 Fax: 734-429-1010 http://www.xycom.com © 2006 Xycom Automation. Specifications may change without notice. Xycom Automation is a trademark of Xycom Automation. Other brand or product names are the property of their respective owners. Page 4