PCM80PS24 - XP POWER - Elite.Parts

Description

XP Power PCM80PS24 Power Supply. Desktop Adapter | 80 Watt | 24V DC Single Output | 90-264 VAC Input | 47-63 Hz

Part Number

PCM80PS24

Price

Request Quote

Manufacturer

XP POWER

Lead Time

Request Quote

Category

POWER PRODUCTS

Features

4000 VAC Isloation
Both Line and Neutral Fused
CCC Approved (PCM80)
Low Leakage Current
Nonstandard Connectors Available
Single, Dual and Triple Outputs
Worldwide Medical Approvals

Datasheet

XP Power-PCM80PS24-Power Supply-datasheet1-1741709399.pdf

151 KiB

Download

Extracted Text

xppower.com 50/80/120 Watts PCM Series • 4000 VAC Isloation • Low Leakage Current • Single, Dual and Triple Outputs • Worldwide Medical Approvals • CCC Approved (PCM80) • Both Line and Neutral Fused • Nonstandard Connectors Available Specification Input General Efficiency • Single output models: 80% typical Input Voltage • 90-264 VAC Multi output models: 75% typical Input Frequency • 47-63 Hz 230 VAC 100% load Input Current • PCM50: 1.35 A max Isolation • 4000 VAC Input to Output PCM80: 1.30 A max 1500 VAC Input to Ground PCM120: 1.60 A max 500 VAC Output to Ground Inrush Current • 30 A at 115 VAC or Switching Frequency • PCM50: 64 kHz typical 60 A at 230 VAC at 25 ˚C cold start PCM80: 55 kHz typical Power Factor • PCM50: 0.55 typical PCM120: 120 kHz typical (PWM), PCM80/120: 0.94 min 70 kHz (PFC) Earth Leakage Current • 180 μA max at 132 VAC/60Hz MTBF • 100 kHrs at full load and 25 ˚C ambient 300 μA max at 264 VAC/50Hz per MIL-HDBK-217F Output Environmental Output Voltage • See tables Operating Temperature • PCM50: 0 ˚C to +70 ˚C, derate from 100% Minimum Load • No minimum load required for single load at 50 ˚C to 50% load at +70 ˚C output models. See tables for multi PCM80: 0 ˚C to +70 ˚C, derate from 100% output models load at 40 ˚C to 50% load at +70 ˚C Start Up Delay • 2 s max PCM120: 0 ˚C to +60 ˚C, derate from 100% load at +40 ˚C to 50% load at +60 ˚C Hold Up Time • 10 ms min at low line Storage Temperature • PCM50/80: -40 ˚C to +80 ˚C Line Regulation • ±1% max at full load PCM120: -20 ˚C to +85 ˚C Load Regulation • ±5% max Transient Response • 5% max. deviation, 500 μs recovery time EMC & Safety for a 50% load change Ripple & Noise • 2% pk-pk, 20MHz BW Emissions • EN55022, level B conducted & radiated Overvoltage Protection • 112-132% Harmonic Currents • EN61000-3-2, class A Overcurrent Protection • 110-200% with auto recovery Voltage Flicker • EN61000-3-3 on all outputs ESD Immunity • IEC61000-4-2, level 3 Temperature • ±0.05% /˚C Perf Criteria A Coefficient Radiated Immunity • IEC61000-4-3 10 V/m, level 3 Perf Criteria A EFT/Burst • IEC61000-4-4, level 3, Perf Criteria A Surge • IEC61000-4-5, level 3, Perf Criteria A Conducted Immunity • IEC61000-4-6 10 V/m, level 3 Perf Criteria A Power Frequency • IEC61000-4-8 10 A/m, Perf Criteria A Magnetic Fields Dips & Interruptions • IEC61000-4-11, 30% 500 ms, 60% 100 ms, 100 % 5000 ms Perf Criteria A, B, B Safety Approvals • PCM80/120: UL60601-1, CSA C22.2 No. 601.1 per cUL PCM50: ANSI/AMMI ES60601-1 EN60601-1, CCC (PCM80) ACDC ACDC PCM50 Models and Ratings Maximum (1) Output Voltage Output Current Regulation Model Number Output Power 40 W 3.3 V 8.00 A 5% PCM50US3V3 40 W 5.0 V 8.00 A 5% PCM50US05 42 W 7.0 V 6.00 A 5% PCM50US07 45 W 9.0 V 5.00 A 4% PCM50US09 45 W 12.0 V 3.75 A 3% PCM50US12 45 W 15.0 V 3.00 A 3% PCM50US15 50 W 18.0 V 2.77 A 3% PCM50US18 50 W 24.0 V 2.08 A 2% PCM50US24 50 W 28.0 V 1.78 A 2% PCM50US28 50 W 36.0 V 1.38 A 2% PCM50US36 50 W 48.0 V 1.04 A 2% PCM50US48 Output 1 Output 2 Output 3 Output Model (1) (4, 5) (1) (1) Power Number Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. 26.5 W +3.3 V 1.0 A 5.0 A 7% +5.0 V 0.4 A 2.0 A 5% PCM50UD00 42.0 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% PCM50UD01 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% PCM50UD03 42.0 W +5.0 V 0.5 A 5.0 A 5% +15.0 V 0.2 A 1.5 A 6% PCM50UD04 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% PCM50UD05 42.0 W +5.0 V 0.5 A 5.0 A 5% -24.0 V 0.1 A 1.0 A 5% PCM50UD06 42.0 W +12.0 V 0.5 A 3.0 A 5% -12.0 V 0.2 A 1.0 A 5% PCM50UD07 42.0 W +15.0 V 0.5 A 2.0 A 5% -15.0 V 0.2 A 1.0 A 5% PCM50UD08 42.0 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT02 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -5.0 V 0.0 A 0.8 A 5% PCM50UT03 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT04 42.0 W +5.0 V 0.5 A 5.0 A 5% +15.0 V 0.2 A 2.0 A 6% -15.0 V 0.0 A 0.8 A 5% PCM50UT05 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT06 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -24.0 V 0.0 A 0.5 A 5% PCM50UT07 Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. Mechanical Details All dimensions are in inches (mm) Weight: 0.88-1.21 lb (400-550 g) approx. Tolerance: 0.04 (1.0) maximum PIN CONNECTIONS Pin Single Dual Triple 1 Common Common Common 5.75 (146.0) 2 Common Common Common 3 Output Output 1 Output 1 4 Common Common Output 3 5 Output Output 2 Output 2 Notes: 1. Cable length is 48.0” (1.22m) approx. 2. For mating connector, use standard 5 pin din 180˚ socket. 3. Optional output connectors available, contact AC INPUT POWER LED IEC 320 INLET sales office. 4. Multi output models include a ferrite bead on the output connector. 3 5 2 4 1 DC OUTPUT 5 PIN PLUG 2.99 (76.0) 1.69 (43.0) PCM80 Models and Ratings Output Output 1 Output 2 Output 3 Model (1) (4, 5) (1) (1) Power Number Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. 50.0 W 3.3 V 0.0 A 15.1 A 7% PCM80PS3V3 65.0 W 5.0 V 0.0 A 13.0 A 5% PCM80PS05 70.0 W 7.0 V 0.0 A 10.0 A 5% PCM80PS07 75.0 W 9.0 V 0.0 A 8.3 A 5% PCM80PS09 75.0 W 10.0 V 0.0 A 7.5 A 5% PCM80PS10 80.0 W 12.0 V 0.0 A 6.7 A 5% PCM80PS12 80.0 W 13.5 V 0.0 A 5.9 A 5% PCM80PS13V5 80.0 W 15.0 V 0.0 A 5.3 A 5% PCM80PS15 80.0 W 16.0 V 0.0 A 5.0 A 5% PCM80PS16 80.0 W 17.5 V 0.0 A 4.6 A 5% PCM80PS17V5 80.0 W 18.0 V 0.0 A 4.4 A 5% PCM80PS18 80.0 W 24.0 V 0.0 A 3.3 A 5% PCM80PS24 80.0 W 27.0 V 0.0 A 3.0 A 5% PCM80PS27 80.0 W 30.0 V 0.0 A 2.7 A 5% PCM80PS30 80.0 W 36.0 V 0.0 A 2.2 A 3% PCM80PS36 80.0 W 48.0 V 0.0 A 1.7 A 3% PCM80PS48 38.0 W 3.3 V 0.5 A 7.0 A 5% 5.0 V 0.3 A 3.0 A 5% PCM80PD00 53.0 W 3.3 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.5 A 5% PCM80PD01 60.0 W 5.0 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.5 A 5% PCM80PD02 60.0 W 5.0 V 0.5 A 7.0 A 5% 15.0 V 0.2 A 2.0 A 5% PCM80PD03 60.0 W 5.0 V 0.5 A 7.0 A 5% 24.0 V 0.2 A 2.0 A 5% PCM80PD04 60.0 W 5.0 V 0.5 A 7.0 A 5% -24.0 V 0.2 A 2.0 A 5% PCM80PD05 65.0 W 12.0 V 0.5 A 5.0 A 5% -12.0 V 0.1 A 0.8 A 5% PCM80PD06 65.0 W 15.0 V 0.5 A 4.0 A 5% -15.0 V 0.1 A 0.8 A 5% PCM80PD07 65.0 W 24.0 V 0.5 A 2.1 A 5% -24.0 V 0.1 A 0.8 A 5% PCM80PD08 51.0 W 3.3 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.0 A 5% -5.0 V 0.1 A 0.8 A 5% PCM80PT01 60.0 W 5.0 V 0.5 A 6.0 A 5% 12.0 V 0.2 A 2.5 A 5% -5.0 V 0.1 A 0.5 A 5% PCM80PT03 60.0 W 5.0 V 0.5 A 6.0 A 5% 12.0 V 0.2 A 2.1 A 5% -12.0 V 0.1 A 0.5 A 5% PCM80PT04 65.0 W 5.0 V 0.5 A 6.0 A 5% 15.0 V 0.2 A 2.1 A 5% -15.0 V 0.1 A 0.5 A 5% PCM80PT05 60.0 W 5.0 V 0.5 A 6.0 A 5% 24.0 V 0.1 A 1.2 A 5% -12.0 V 0.1 A 0.5 A 5% PCM80PT06 65.0 W 5.0 V 0.5 A 7.0 A 5% 24.0 V 0.2 A 2.0 A 5% -24.0 V 0.1 A 0.5 A 5% PCM80PT07 Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. Mechanical Details All dimensions are in inches (mm) Weight: 1.76-1.98 lb (800-900 g) approx. Tolerance: 0.04 (1.0) maximum PIN CONNECTIONS Pin Single Dual Triple 6.63 (168.4) 1 Common Common Common 2 Common Output 2 Output 3 3 Output 1 Output 1 Output 1 4 Common Output 2 Output 2 5 Output 1 Output 1 Output 2 6 Common Common Common 7 Output 1 Output 1 Output 1 8 Output 1 Common Output 3 Shell Ground Ground Ground Notes: 1. Cable length is 48.0” (1.22m) approx. 2. Optional output connectors available, contact sales office. 3. Multi output models include a ferrite bead on AC INPUT POWER LED the output connector. IEC 320 INLET 8 6 7 1 3 4 5 2 DC OUTPUT 8 PIN DIN PLUG ACDC 3.07 (78.0) 1.97 (50.0) ACDC PCM120 Models and Ratings Maximum (1) Output Voltage Output Current Peak Current Model Number Output Power 108 W 12.0 V 9.00 A 15.00 A PCM120PS12 113 W 15.0 V 7.50 A 10.00 A PCM120PS15 120 W 18.0 V 6.50 A 9.00 A PCM120PS18 120 W 24.0 V 5.00 A 7.00 A PCM120PS24 120 W 48.0 V 2.50 A 4.00 A PCM120PS48 Notes 1. Peak current is 5 seconds maximum duration with a 10% duty cycle. Mechanical Details All dimensions are in inches (mm) Weight: 1.90 lb (860 g) approx. Tolerance: 0.04 (1.0) maximum 7.08 (180.0) POWER LED PIN CONNECTIONS Pin All models AC INPUT 1 Return IEC 320 INLET 2 Return 3 Output +V 4 Return 5 Output +V 8 6 7 6 Return 7 Output +V 1 3 8 Output +V 4 5 Shell Ground 2 Notes: DC OUTPUT 1. Cable length is 72.0” (1.83m) approx. 8 PIN PLUG 2. Optional output connectors available, contact sales office. Derating Curve 100 50 0 10 20 30 40 50 60 Ambient Temperature (˚C) 28-Feb-12 3.74 (95.0) Load (%) 1.85 (47.0)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products