Manufacturers
XP POWER JTA1024S05
Description
10W DC/DC Converter
Part Number
JTA1024S05
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
DC-DC CONVERTERS
Datasheet
Extracted Text
10-20 Watts xppower.com JTA Series • Compact Size • Ultra Wide 4:1 Input • -40 ˚C to +70 ˚C Operation - No Derating • Single & Dual Outputs • Overvoltage & Overcurrent Protection • UL Safety Approvals • Remote On/Off Specification Input General Input Voltage Range • 9-36 VDC Efficiency • See table 18-75 VDC Isolation • 1500 VDC Input to Output Input Current • JTA10: 1.45 A max at 9 VDC input MTBF • 1,000 kHrs min per MIL-HDBK-217F JTA15: 2.20 A max at 9 VDC input JTA20: 2.90 A max at 9 VDC input Environmental Operating Temperature • -40 ºC to +100 ºC, derate from 100% load Output at +70 ºC to 0% load at +100 ºC Output Voltage • See table Cooling • Convection-cooled Output Voltage Trim • ±10% minimum for 15 and 20 W Operating Humidity • 5-95% RH, non-condensing models only Storage Temperature • -55 ºC to +105 ºC Voltage Balance • ±1% max. dual models, 100% load Minimum Load • No minimum load required for single EMC & Safety output models, 10% required for dual Emissions • EN55022, output models level A conducted (below -25 ºC) Line Regulation • ±1% maximum level B conducted (-25 ºC to +100 ºC) Load Regulation • Single output models: ±1% maximum See note 1. Dual output models: ±2% maximum EN55022, level A radiated for a 10-100% load change ESD Immunity • EN61000-4-2, level 2 Setpoint Accuracy • ±2% Perf Criteria A Ripple & Noise • Single output models: 50 mV pk-pk Radiated Immunity • EN61000-4-3 3 V/rms, Dual output models: 75 mV pk-pk Perf Criteria A at 20MHz BW Conducted Immunity • EN61000-4-6 3 V/m, Transient Response • 4% max. deviation, revcovery to within Perf Criteria A 1% in <500 μs after a 25% load change Safety Approvals • UL60950 Temperature • 0.02% /ºC Coefficient Overvoltage Protection • See table Overcurrent Protection • Continuous with auto recovery Remote On/Off • On = Logic High or Open Off = Logic Low or <1.8 V (15-20 W models only) DC-DC DC-DC JTA10 Models and Ratings Output 1 Output 2 Input Maximum Overvoltage Model Efficiency Voltage Power Protection Number V1nom Imax V2nom Imax 6.6 W 3.9 V 3.3 V 2.00 A 77% JTA1024S3V3 10.0 W 6.8 V 5.0 V 2.00 A 79% JTA1024S05 10.0 W 15.0 V 12.0 V 0.83 A 81% JTA1024S12 24 V 10.0 W 18.0 V 15.0 V 0.67 A 81% JTA1024S15 (9-36) 10.0 W 6.8 V 5.0 V 1.00 A -5.0 V 1.00 A 80% JTA1024D01 10.0 W 15.0 V 12.0 V 0.42 A -12.0 V 0.42 A 80% JTA1024D02 10.0 W 18.0 V 15.0 V 0.33 A -15.0 V 0.33 A 80% JTA1024D03 6.6 W 3.9 V 3.3 V 2.00 A 78% JTA1048S3V3 10.0 W 6.8 V 5.0 V 2.00 A 80% JTA1048S05 10.0 W 15.0 V 12.0 V 0.83 A 82% JTA1048S12 48 V 10.0 W 18.0 V 15.0 V 0.67 A 82% JTA1048S15 (18-75) 10.0 W 6.8 V 5.0 V 1.00 A -5.0 V 1.00 A 81% JTA1048D01 10.0 W 15.0 V 12.0 V 0.42 A -12.0 V 0.42 A 83% JTA1048D02 10.0 W 18.0 V 15.0 V 0.33 A -15.0 V 0.33 A 83% JTA1048D03 Notes 1. For EN55022 Level B performance below -25 ºC, a 100 μF (24 VDC input), 22 μF (48 VDC input) electrolytic capacitor is required across the input of the converter. Mechanical Details 1.00 (25.4) 0.41 0.50 (10.2) (12.7) 0.20 0.22 (5.1) (5.6) 0.60 PIN CONNECTIONS ( 15.2) Pin Single Output Dual Output 1 +Input +Input 2 -Input -Input 21 3 +Output +Output 4 No pin Common 2.00 0.80 5 -Output -Output (50.8) (20.3) 0.04 DIA 54 3 (1.0) All dimensions are in inches (mm) Weight: 0.06 lb (28 g) approx. Packaging Style: Copper case with non-conducting base 0.30 0.45 (7.6) (11.4) 0.10 (2.5) Application Notes Derating Curve 12 W 10 W 8 W 6 W 4 W 2 W 0 W -40 0 10 20 30 40 50 60 70 80 90 100 Ambient Temp ( ˚C) 17.5 W 15 W 1 LOAD (W) JTA15 Models and Ratings Output 1 Output 2 Input Maximum Overvoltage Model Efficiency Voltage Power Protection Number V1nom Imax V2nom Imax 10.0 W 3.9 V 3.3 V 3.000 A 76% JTA1524S3V3 15.0 W 6.8 V 5.0 V 3.000 A 80% JTA1524S05 15.0 W 15.0 V 12.0 V 1.250 A 82% JTA1524S12 24 V 15.0 W 18.0 V 15.0 V 1.000 A 82% JTA1524S15 (9-36) 15.0 W 6.8 V 5.0 V 1.500 A -5.0 V 1.500 A 80% JTA1524D01 15.0 W 15.0 V 12.0 V 0.625 A -12.0 V 0.625 A 82% JTA1524D02 15.0 W 18.0 V 15.0 V 0.500 A -15.0 V 0.500 A 82% JTA1524D03 10.0 W 3.9 V 3.3 V 3.000 A 76% JTA1548S3V3 15.0 W 6.8 V 5.0 V 3.000 A 80% JTA1548S05 15.0 W 15.0 V 12.0 V 1.250 A 82% JTA1548S12 48 V 15.0 W 18.0 V 15.0 V 1.000 A 82% JTA1548S15 (18-75) 15.0 W 6.8 V 5.0 V 1.500 A -5.0 V 1.500 A 80% JTA1548D01 15.0 W 15.0 V 12.0 V 0.625 A -12.0 V 0.625 A 82% JTA1548D02 15.0 W 18.0 V 15.0 V 0.500 A -15.0 V 0.500 A 82% JTA1548D03 Notes 1. For EN55022 Level B performance below -25 ºC, a 220 μF (24 VDC input), 47 μF (48 VDC input) electrolytic capacitor is required across the input of the converter. Mechanical Details 1.60 (40.6) 0.70 0.50 (12.7) (17.8) 0.10 0.30 0.22 (2.5) (7.6) (5.6) 8 7 6 5 0.04 DIA PIN CONNECTIONS (1.0) Pin Single Output Dual Output 1 On/Off control On/Off control 2.00 3 -Vin -Vin (50.8) 4 +Vin +Vin 1.80 5 Trim Trim (45.7) 6 -Vout -Vout 12 W 7 +Vout Common 8 No pin +Vout 10 W 8 W 4 3 1 All dimensions are in inches (mm) 6 W Weight: 0.11 lb (50 g) approx. 4 W 0.70 0.20 Packaging Style: Copper case with non-conducting base 0.45 (17.8) (5.1) (11.4) 2 W 0.60 (15.2) 0 W -40 0 10 20 30 40 50 60 70 80 90 100 Ambient Temp ( ˚C) Application Notes Derating Curve Output Trim 17.5 W OUTPUT TRIM Model Number R Trim Down (kΩ) R Trim Up (kΩ) 15 W 3.3 V (6.18 - (12.1 x ΔVo)) / ΔVo (3.484 - (7.511 x ΔVo)) / ΔVo 5 V (5.788 - (10.57 x ΔVo)) / ΔVo (5.788 - (8.25 x ΔVo)) / ΔVo 12.5 W 12 V (86.496 - (60.1 x ΔVo)) / ΔVo (19.763 - (14.366 x ΔVo)) / ΔVo 15 V (150 - (87 x ΔVo)) / ΔVo (25.585 - (14.516 x ΔVo)) / ΔVo 10 W ±5 V (430 - (120 x ΔVo)) / ΔVo (42.141 - (13.793 x ΔVo)) / ΔVo 7.5 W ±12 V (743 - (177 x ΔVo)) / ΔVo (56.644 - (17.647 x ΔVo)) / ΔVo ±15 V (68.296 - (48.1 x ΔVo)) / ΔVo (20.657 - (19.5 x ΔVo)) / ΔVo 5 W Note: 1.ΔVo is the change in the trimmed output voltage from the nominal output voltage. 2.5 W Example: JTA1524S05 trimmed to 5.3 V 0 W ΔVo = 5.0 - 5.3 = 0.3 VDC -40 0 10 20 30 40 50 60 70 80 90 100 The equation is (5.788 - (8.25 x ΔVo)) / ΔVo Ambient Temp ( ˚C) The value of resistor = (5.788 - (8.25 x 0.3)) / 0.3 = 11.04 KΩ Connect the resistor between TRIM pin and -Vo pin. 24 W 20 W A B 16 W 1 DC-DC LOAD (W) (W) LOAD (W) DC-DC JTA20 Models and Ratings Output 1 Output 2 Input Maximum Overvoltage Model Efficiency Voltage Power Protection Number V1nom Imax V2nom Imax 13.2 W 3.9 V 3.3 V 4.00 A 78% JTA2024S3V3 20.0 W 6.8 V 5.0 V 4.00 A 81% JTA2024S05 20.0 W 15.0 V 12.0 V 1.67 A 83% JTA2024S12 24 V 20.0 W 18.0 V 15.0 V 1.33 A 83% JTA2024S15 (9-36) 20.0 W 6.8 V 5.0 V 2.00 A -5.0 V 2.00 A 83% JTA2024D01 20.0 W 15.0 V 12.0 V 0.83 A -12.0 V 0.83 A 83% JTA2024D02 20.0 W 18.0 V 15.0 V 0.67 A -15.0 V 0.67 A 83% JTA2024D03 13.2 W 3.9 V 3.3 V 4.00 A 78% JTA2048S3V3 20.0 W 6.8 V 5.0 V 4.00 A 82% JTA2048S05 20.0 W 15.0 V 12.0 V 1.67 A 84% JTA2048S12 48 V 20.0 W 18.0 V 15.0 V 1.33 A 84% JTA2048S15 (18-75) 20.0 W 6.8 V 5.0 V 2.00 A -5.0 V 2.00 A 84% JTA2048D01 20.0 W 15.0 V 12.0 V 0.83 A -12.0 V 0.83 A 84% JTA2048D02 20.0 W 18.0 V 15.0 V 0.67 A -15.0 V 0.67 A 84% JTA2048D03 Notes 1. For EN55022 Level B performance below -25 ºC, a 220 μF (24 VDC input), 47 μF (48 VDC input) electrolytic capacitor is required across the input of the converter. 12 W Mechanical Details 10 W 1.60 (40.6) 8 W 0.70 0.50 6 W (12.7) (17.8) 0.10 0.30 4 W 0.22 (2.5) (7.6) (5.6) 2 W 0 W 8 7 6 5 0.04 DIA -40 0 10 20 30 40 50 60 70 80 90 100 (1.0) PIN CONNECTIONS Ambient Temp ( ˚C) Pin Single Output Dual Output 1 On/Off control On/Off control 2.00 3 -Vin -Vin (50.8) 4 +Vin +Vin 1.80 17.5 W 5 Trim Trim (45.7) 6 -Vout -Vout 15 W 7 +Vout Common 8 No pin +Vout 12.5 W 10 W 4 3 1 All dimensions are in inches (mm) 7.5 W Weight: 0.11 lb (50 g) approx. 0.70 0.20 0.45 5 W Packaging Style: Copper case with non-conducting base (17.8) (5.1) (11.4) 2.5 W 0.60 (15.2) 0 W -40 0 10 20 30 40 50 60 70 80 90 100 Application Notes Ambient Temp ( ˚C) Derating Curve Output Trim 24 W OUTPUT TRIM Model Number R Trim Down (kΩ) R Trim Up (kΩ) 20 W 3.3 V (6.18 - (12.1 x ΔVo)) / ΔVo (3.484 - (7.511 x ΔVo)) / ΔVo A B 5 V (5.788 - (10.57 x ΔVo)) / ΔVo (5.788 - (8.25 x ΔVo)) / ΔVo 16 W 12 V (86.496 - (60.1 x ΔVo)) / ΔVo (19.763 - (14.366 x ΔVo)) / ΔVo 12 W 15 V (150 - (87 x ΔVo)) / ΔVo (25.585 - (14.516 x ΔVo)) / ΔVo ±5 V (430 - (120 x ΔVo)) / ΔVo (42.141 - (13.793 x ΔVo)) / ΔVo 8 W ±12 V (743 - (177 x ΔVo)) / ΔVo (56.644 - (17.647 x ΔVo)) / ΔVo ±15 V (68.296 - (48.1 x ΔVo)) / ΔVo (20.657 - (19.5 x ΔVo)) / ΔVo 4 W Note: 0 W 1.ΔVo is the change in the trimmed output voltage from the nominal output voltage. -40 0 10 20 30 40 50 60 70 80 90 100 Example: JTA1524S05 trimmed to 5.3 V Ambient Temp ( ˚C) ΔVo = 5.0 - 5.3 = 0.3 VDC Curve A: Convection cooling The equation is (5.788 - (8.25 x ΔVo)) / ΔVo 100% load at +65 ˚C to 0% load at +100 ˚C The value of resistor = (5.788 - (8.25 x 0.3)) / 0.3 = 11.04 KΩ Curve B: 150 LFM airflow Connect the resistor between TRIM pin and -Vo pin. 100% load at +70 ˚C to 0% load at +100 ˚C 10-Apr-06 LOAD (W) LOAD (W) LOAD (W)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the JTA1024S05 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods