Manufacturers
XP POWER ICH5024WS15
Description
XP Power ICH5024WS15 Power Supply - XP Power ICH5024WS15
Part Number
ICH5024WS15
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
DC-DC CONVERTERS
Specifications
Current Limit
110-140% nominal output
Initial Set Accuracy
±1% max
Input
9-36 VDC
Output Voltage Trim
±10%
Remote On/Off
See note 1 and 2
Features
- 2:1 & 4:1 Input Ranges
- Continuous Short Circuit Protection
- Efficiency to 85%
- Five-Sided Metal Case
- Isolated Output
- Regulated Outputs
- Single & Dual Output Versions
Datasheet
Extracted Text
50-200 Watts xppower.com ICH Series • Isolated Output • Efficiency to 85% • Single & Dual Output Versions • 2:1 & 4:1 Input Ranges • Regulated Outputs • Continuous Short Circuit Protection • Five-Sided Metal Case Specification Input General Input Voltage Range • See tables Efficiency • See tables Input Current (no load) • See tables Isolation Voltage • 1500 VDC Input to Output 1500 VDC Input to Case Input Reverse Voltage • None 1500 VDC Output to Case Protection 7 Isolation Resistance •10 Ω min Input Filter • Pi type Switching Frequency • ICH50/ICH7548W/IFH200: 300 kHz typical Undervoltage Lockout • 12 Vin, power up 8.8 V, down 8.0 V ICH7512/ICH7524: 400 kHz typical 24 Vin, power up 17.0 V, down 16.0 V ICH100/ICH150: 500 kHz typical 48 Vin, power up 34.0 V, down 32.5 V Environmental Output Operating Case • -40 ºC to +100 ºC Output Voltage Trim • ±10% Temperature Initial Set Accuracy • ±1% max Storage Temperature • ICH100/150/200: -40 ºC to +105 ºC Line Regulation • ±0.2% max measured from high line ICH50/75: -55 ºC to +105 ºC to low line Load Regulation • ±0.2% max measured from 0-100% load EMC & Safety Transient Response • <500 µs, 25% step load change Emissions • EN55022, level A conducted Ripple & Noise • 2.5, 3.3 & 5 V models: 100 mV pk-pk ESD Immunity • EN61000-4-2, level 2 12 & 15 V models: 150 mV pk-pk Perf Criteria B 24, 28 & 48 V models: 1% max pk-pk Radiated Immunity • EN61000-4-3, 3 V/m (20 MHz bandwidth) Perf Criteria B Overvoltage Protection • 115-140% Conducted Immunity • EN61000-4-6, 3 V rms Short Circuit Protection • Continuous Perf Criteria B Temperature • ±0.03% /ºC Safety Approvals • UL1950 (W versions only) Coefficient Current Limit • 110-140% nominal output Remote On/Off • See note 1 and 2 Thermal Shutdown • Case temperature 100 ˚C DC-DC DC-DC ICH Series Models and Ratings Input Current Input Output Output Model Efficiency (2) Voltage Voltage Current No Load Full Load Number 3.3 V 10.00 A 50 mA 3525 mA 78% ICH5024WS3V3 5.0 V 10.00 A 50 mA 5145 mA 81% ICH5024WS05 9-36 VDC 12.0 V 4.16 A 50 mA 4950 mA 84% ICH5024WS12 15.0 V 3.33 A 50 mA 4950 mA 84% ICH5024WS15 24.0 V 2.08 A 50 mA 4950 mA 84% ICH5024WS24 3.3 V 10.00 A 50 mA 1785 mA 77% ICH5048WS3V3 5.0 V 10.00 A 50 mA 2570 mA 81% ICH5048WS05 18-75 VDC 12.0 V 4.16 A 50 mA 2510 mA 83% ICH5048WS12 15.0 V 3.33 A 50 mA 2510 mA 83% ICH5048WS15 24.0 V 2.08 A 50 mA 2510 mA 83% ICH5048WS24 2.5 V 15.00 A 50 mA 4110 mA 76% ICH7512S2V5 3.3 V 15.00 A 50 mA 5290 mA 78% ICH7512S3V3 5.0 V 15.00 A 50 mA 7715 mA 81% ICH7512S05 9-18 VDC 12.0 V 6.25 A 50 mA 7440 mA 84% ICH7512S12 15.0 V 5.00 A 50 mA 7440 mA 84% ICH7512S15 24.0 V 3.13 A 50 mA 7440 mA 84% ICH7512S24 3.3 V 15.00 A 50 mA 2610 mA 78% ICH7548WS3V3 5.0 V 15.00 A 50 mA 1905 mA 82% ICH7548WS05 18-75 VDC 12.0 V 6.25 A 50 mA 1860 mA 84% ICH7548WS12 15.0 V 5.00 A 50 mA 1860 mA 84% ICH7548WS15 24.0 V 3.12 A 50 mA 1860 mA 84% ICH7548WS24 Output 1 Output 2 Input Current Input Model Efficiency (2) Voltage Number Voltage Current Voltage Current No Load Full Load 5.0 V 15.0 A 2.5 V 15.0 A 50 mA 3.765 A 83% ICH7524D052V5 18-36 VDC 5.0 V 15.0 A 3.3 V 15.0 A 50 mA 3.765 A 83% ICH7524D053V3 5.0 V 15.0 A 2.5 V 15.0 A 30 mA 1.860 A 84% ICH7548D052V5 36-75 VDC 5.0 V 15.0 A 3.3 V 15.0 A 30 mA 1.860 A 84% ICH7548D053V3 Input Current Input Output Output Model Efficiency (2) Voltage Voltage Current Number No Load Full Load 2.5 V 20.00 A 50 mA 2705 mA 77% ICH10024S2V5 3.3 V 20.00 A 50 mA 3480 mA 79% ICH10024S3V3 5.0 V 20.00 A 50 mA 5020 mA 83% ICH10024S05 18-36 VDC 12.0 V 8.30 A 50 mA 4880 mA 85% ICH10024S12 15.0 V 6.70 A 50 mA 4925 mA 85% ICH10024S15 24.0 V 4.17 A 50 mA 4905 mA 85% ICH10024S24 2.5 V 20.00 A 50 mA 1335 mA 78% ICH10048S2V5 3.3 V 20.00 A 50 mA 1720 mA 80% ICH10048S3V3 5.0 V 20.00 A 50 mA 2480 mA 84% ICH10048S05 36-75 VDC 12.0 V 8.30 A 50 mA 2442 mA 85% ICH10048S12 15.0 V 6.70 A 50 mA 2463 mA 85% ICH10048S15 24.0 V 4.17 A 50 mA 2463 mA 85% ICH10048S24 2.5 V 30.00 A 25 mA 2.60 A 74% ICH15048S2V5 3.3 V 30.00 A 25 mA 2.60 A 79% ICH15048S3V3 5.0 V 30.00 A 25 mA 3.70 A 83% ICH15048S05 36-75 VDC 12.0 V 12.50 A 25 mA 3.60 A 85% ICH15048S12 15.0 V 10.00 A 25 mA 3.60 A 85% ICH15048S15 24.0 V 6.25 A 25 mA 3.60 A 85% ICH15048S24 2.5 V 40.00 A 25 mA 2.1 A 74% IFH20048S2V5 3.3 V 40.00 A 25 mA 3.5 A 79% IFH20048S3V3 5.0 V 40.00 A 25 mA 5.0 A 83% IFH20048S05 12.0 V 17.00 A 25 mA 5.0 A 85% IFH20048S12 36-75 VDC 15.0 V 13.30 A 25 mA 5.0 A 85% IFH20048S15 24.0 V 8.33 A 25 mA 5.0 A 85% IFH20048S24 28.0 V 7.14 A 25 mA 5.0 A 85 % IFH20048S28 48.0 V 4.20 A 25 mA 5.0 A 85 % IFH20048S48 Notes 1. Logic compatibility open collector ref to -ve input, module On open circuit module Off <0.8 VDC. 2. Add suffix ‘N’ to the model number to receive the unit with negative logic Remote On/Off. 3. Ripple & noise is measured with a 10 µF tantalum capacitor and 0.1 µF ceramic capacitor across output. ICH Series Mechanical Details All dimensions are in inches (mm) Weight: 0.22 lbs (100 g) approx. Case Material: ICH50/75/100/150 - Aluminium IFH200 - Aluminium baseplate with plastic case ICH Series - Single Output Models Mounting Inserts 0.18 min. BOTTOM VIEW M3*0.5 Through 4pl. (4.6) ICH50 to ICH150 5 4 ø0.08 (2.03) 1.40 PIN CONNECTIONS 3 6 (35.6) 2.40 Pin Function 0.60 7 (61.0) (15.2) 1 +Vin 2.00 2 8 (50.8) 2 On/Off ø0.04 3 Case 1 9 (1.02) 4 -Vin 5 -Vout 6 -Sense 1.90 0.50 (48.3) 7 Trim (12.7) 2.28 SIDE VIEW 8 +Sense (57.9) 9 +Vout 0.28 BOTTOM VIEW (7.2) M3*0.5 Through 4pl. IFH200 4 5 *ø0.08 6 3 (2.03) 0.30 Pins 5 & 9 2.40 (7.6) 2.00 7 (61.0) (50.8) 0.30 (7.6) 0.70 2 8 (17.8) *ø0.04 (1.02) 1 9 Pins 1-4, 6-8 4.20 * Soder plate over copper alloy 0.53 (106.7) (13.5) 4.60 SIDE VIEW (116.8) ICH Series - Dual Output Models Mounting Inserts 0.18 min. BOTTOM VIEW (4.6) M3*0.5 Through 4pl. PIN CONNECTIONS Pin Function 1 +Vin 5 4 2 On/Off 6 1.40 3 Case 3 (35.6) 7 2.00 1.00 4 -Vin 0.60 2.40 (50.8) (25.4) (15.2) (61.0) 8 5 +V2 0.40 1.60 2 (10.2) (40.6) 6 -V2 9 ø0.04 (1.02) 7 V2 Trim 1 10 8 +V1 9 -V1 10 V1 Trim 1.90 0.50 (48.3) (12.7) 2.28 SIDE VIEW (57.9) DC-DC DC-DC ICH Series Derating Curves Power Dissipated vs Ambient Temperature And Air Flow - ICH50-150S THERMAL RESISTANCE vs AIR FLOW Natural Convection Air Flow Rate Typical Rca 20ft./min. (0.1 m/s) 45 Natural Convection 20 ft./min (0.1 m/s) 7.12 ˚C/W 100 ft./min. (0.5 m/s) 40 100 ft./min (0.5 m/s) 6.21 ˚C/W 200 ft./min. (1.0 m/s) 35 200 ft./min (1.0 m/s) 5.17 ˚C/W 300 ft./min. (1.5 m/s) 30 300 ft./min (1.5 m/s) 4.29 ˚C/W 25 400 ft./min (2.0 m/s) 3.64 ˚C/W 20 500 ft./min (2.5 m/s) 2.96 ˚C/W 15 10 600 ft./min (3.0 m/s) 2.53 ˚C/W 5 700 ft./min (3.5 m/s) 2.37 ˚C/W 0 800 ft./min (4.0 m/s) 2.19 ˚C/W 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (˚C) Temperature Rise = Pd x Rca Forced Convection Power Derating without Heatsink Where Pd = Pin - Pout or Pout (1-η) / η Power Dissipated vs Ambient Temperature And Air Flow - ICH200S Power Dissipated vs Ambient Temperature And Air Flow - ICH75D Natural Convection 20ft./min. (0.1 m/s) Natural Convection 25 20ft./min. (0.1 m/s) 45 100 ft./min. (0.5 m/s) 100 ft./min. (0.5 m/s) 40 20 200 ft./min. (1.0 m/s) 200 ft./min. (1.0 m/s) 35 15 300 ft./min. (1.5 m/s) 30 300 ft./min. (1.5 m/s) 10 25 20 5 15 10 0 5 40 60 70 80 90 0 10 20 30 50 100 0 Ambient Temperature (˚C) 0 10 20 30 40 50 60 70 80 90 100 Forced Convection Power Derating without Heatsink Ambient Temperature (C) Application Notes Remote On/Off Control External Output Trimming ON/OFF +SENSE +SENSE HIGH SIGNAL HERE TRIM UP DISABLE OUTPUT -Vin 10K ohms TRIM TRIM TRIMPOT TRIM DOWN -SENSE -SENSE LOGIC TABLE Logic State (Pin 2) Negative Logic Positive Logic Logic Low Switch Closed Module On Module Off Output may be trimmed by ±10% (±5% for dual output models) Logic High Switch Open Module Off Module On with a fixed resistor or an external trimpot as shown. Output Noise +Vo Ceramic 0.1 µF The output noise is measured with a 10 µF tantalum capacitor and 0.1 µF ceramic capacitor across output. Resistor Load To Solid tantalum 10 µF Scope -Vo 15-Nov-06 400 ft./min. (2.0 m/s) 500 ft./min. (2.5 m/s) 600 ft./min. (3.0 m/s) 700 ft./min. (3.5 m/s) 800 ft./min. (4.0 m/s) 400 ft./min. (2.0 m/s) 400 ft./min. (2.0 m/s) 500 ft./min. (2.5 m/s) 600 ft./min. (3.0 m/s) 700 ft./min. (3.5 m/s) 800 ft./min. (4.0 m/s) Power Dissipated Pd (W) Power Dissipated Pd (W) Power Dissipated Pd (W)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ICH5024WS15 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power THD12-1210; Input: 9-18 VDC; Output: 3.3V/3.5A; Power: 11.55 W
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods