Manufacturers
XP POWER ECS100US28
Description
XP Power ECS100US28 Power Supply-28.0 VDC Output Voltage and 3.6 A Max Output Current
Part Number
ECS100US28
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
PRODUCTS - E
Features
- 80/100 W - Convection/Forced-cooled Ratings
- Class I & Class II Construction
- Green Mode,
- Industry Standard 2” x 4” Package
- IT & Medical Safety Approvals
- Low Leakage Current
Datasheet
Extracted Text
100 Watts xppower.com ECS100 Series • IT & Medical Safety Approvals • Green Mode, <0.5 W Standby Power • 80/100 W - Convection/Forced-cooled Ratings • Class I & Class II Construction • Industry Standard 2” x 4” Package • Low Leakage Current Specification Input General Input Voltage • 80-264 VAC (120-370 VDC), derate output Efficiency • 88% typical power <90 VAC, see derating curve Isolation • 4000 VAC Input to Output, 1500 VAC Input Input Frequency • 47-400 Hz (See note 1) to Ground, 500 VDC Output to Ground Input Current • 1.5 A typical at 115 VAC, full load Sw itching Frequency • 65 KHz typical 0.9 A typical at 230 VAC, full load Power Density • 10 W/in3 Inrush Current • 40 A max at 230 VAC, cold start 25 ºC MTBF • 834 kHrs to MIL-HDBK-217F at 25 ºC, GB 1245 kHrs to Telecordia SR-332 Power Factor • EN61000-3-2, class A at 25 ºC, GB <0.5 W No Load Input Power • Earth Leakage Current • 230 µA at 264 VAC/60 Hz max. Environmental Input Protection • Internal T5 A/250 V fuse in line and neutral Operating Temperature • -20 ˚C to +70 ˚C derate linearly from +50 ˚C at 2.5%/˚C to 50% load at +70 ˚C. Output Cooling • Convection & fan cooled ratings (see tables) Output Voltage • 12-48 VDC (see tables) Operating Humidity • 95% RH, non-condensing Output Voltage Trim • ±10% Storage Temperature • -40 ˚C to +85 ˚C Initial Set Accuracy • ±1% Operating Altitude • 3000 m Minimum Load • No minimum load required Shock • 30 g pk, half sine, 6 axes Start Up Delay • 1stypical V ibration • 2grms,5Hzto500Hz,3axes Start Up Rise Time • 50 ms Hold Up Time • 16/75 ms min at 115/230 VAC E MC & Safety Drift • ±0.2% after 20 min warm up Low Voltage PSU EMC • EN61204-3, high severity level as below Line Regulation • ±0.5% max Emissions • EN55022 level B conducted Load Regulation • ±1% EN55022 level A radiated 5% typical Over/Undershoot • Harmonic Currents • EN61000-3-2, class A Transient Response • 4% max. deviation, recovery to within Voltage Flicker • EN61000-3-3 1% in 500 µs for a 50-75-50% load Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A change EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Ripple & Noise • 1% pk-pk V1, 20 MHz bandwidth EN61000-4-5, installation class 3 Surge • Overvoltage Protection • 115-140% Vnom, recycle input to reset Perf Criteria A Overload Protection • 110-150% C onducted Immunity • EN61000-4-6, level 3 Perf Criteria A Continuous trip and restart (Hiccup mode) Short Circuit Protection • EN61000-4-11, 30% 10 ms, 60% 100 ms, Dips & Interruptions • Temperature • 0.05%/˚C 100%5000 ms, Perf Criteria A, B, B, Coefficient EN60601-1-2, 30% 500 ms, 60% 100 ms, 100%10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation. Safety Approvals • IEC60950-1 CB report, CSA 22.2 No. 60950-1, UL60950-1, TUV EN60950-1 IEC60601-1 CB report, CSA 22.2 No. 60601-1, UL60601-1, TUV 60601-1 Notes Equipment Protection • Class I and Class II 1. Safety approvals cover frequency 47-63 Hz. Class ECS100 Models and Ratings Output Power Output Voltage V1 Max Output Current Model Number(1) Forced Cooled (10 CFM) Convection Cooled 100 W 80 W 12.0 VDC 8.3 A ECS100US12 100 W 80 W 15.0 VDC 6.7 A ECS100US15 100 W 80 W 24.0 VDC 4.2 A ECS100US24 100 W 80 W 28.0 VDC 3.6 A ECS100US28 100 W 80 W 48.0 VDC 2.1 A ECS100US48 Notes 1. For covered versions, add suffix ‘-C’ to model number or order part no. ECM40/60 COVER KIT for standalone cover. Not suitable for use in class II installations, derate output by 20% with cover. Mechanical Details 4.00(101.6) 1.25 (31.8) 0.125(3.18) 3.750 (95.25) C4 2.00(50.8) 1.750 (44.45) Voltage Adj. J1 C5 T1 J2 1.00(25.4) 1.01 (25.7) Q1 0.25 Faston 0 .20 (5.1) 0.14 (3.5) 0 .125 (3.1 8) Ground Tab SMD Component Height 4Xø.156(3.96)MountingHoles 0.20 (5.1) ø.312 (7.92) Clearance top and bottom 4.49 (114.0) 2.52 Input Connector Output Connector (64.0) Input Connector J1 Molex PN 09-65-2038 0.25 (0.6) Ground Faston Terminal Pin 1 Line Pin 2 Neutral 0.25” Faston Earth 0.807 Output Connector J2 1.54 (20.50) (39.0) 2xM3x0.5THD Molex PN 09-65-2048 0.16 (4.0) Pin 1 +V1 Max Screw Penetration Pin 2 +V1 Pin 3 RTN 4.055 (103.00) 0.22 Pin 4 RTN (5.5) 4.055 (103.00) 0.22 J1 mates with Molex Housing (5.5) PN 09-50-1031, J2 mates with 0.79 Molex Housing PN 09-50-1041 (20.0) and both with Molex Series 5194 Crimp Terminals 0.984 (25.00) Notes 1. All dimensions in inches (mm). 4xM3x0.5THD Tolerance .xx = ±0.02 (0.50); 0.16 (4.0) Max Screw Penetration .xxx = ±0.01 (0.25) 2. Weight: 0.386 lbs (175 g) Derating Curve 100 100 90 90 Force-cooled >10 CFM 80 80 Convection-cooled 70 70 60 60 Convection-cooled with cover 50 50 40 40 30 80 85 90 264 -20 +40 +50 +60 +70 Input Voltage (VAC) Ambient Temperature (ºC) 04-June-09
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ECS100US28 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods