Manufacturers
XP POWER ECE
Description
XP Power ECE 5/10 WATT Series; 85-264 VAC (120-370 VDC) derate load from 100% at 90 VAC to 90% at 85, 47-63Hz VAC AC/DC Power Supplies
Part Number
ECE
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
PRODUCTS - E
Features
- Encapsulated PCB Mount
- No External Components Required
- Peak Load Capability
- Single Outputs from 3.3 to 48 V
- Ultra Compact Size
Datasheet
Extracted Text
5/10 Watts xppower.com ECE Series • Ultra Compact Size • Single Outputs from 3.3 to 48 V • Encapsulated PCB Mount • <0.3 W No Load Input Power • Peak Load Capability • No External Components Required • 3 Year Warranty GREEN•POWER Specification Input General Input Voltage • 85-264 VAC (120-370 VDC) derate load Efficiency • See tables from 100% at 90 VAC to 90% at 85 VAC Isolation • 4000 VAC Input to Output Input Frequency • 47-63 Hz Switching Frequency • 130 kHz typical 3 Input Current • ECE05: 0.1 A rms at 230 VAC Power Density • ECE05: 8.3 W/In 3 ECE10: 0.2 A rms at 230 VAC ECE10: 11.1 W/In Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, MTBF • >450 kHrs to MIL-HDBK-217F at 25 °C, GB cold start at 25 °C Power Factor • EN61000-3-2 Class A Environmental Earth Leakage Current • Class II construction no earth Operating Temperature • -25 °C to +70 °C, derate linearly from No Load Input Power • <0.3 W 100% at +50 °C to 50% at +70 °C Input Protection • Internal T1 A/250 VAC fuse Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Output Storage Temperature • -40 °C to +85 °C Operating Altitude • 3048 m, 10,000 ft Output Voltage • See tables Vibration • 2 g, 10 Hz to 500 Hz, 10 mins/cycle, Initial Set Accuracy • ±1% 60 mins each cycle Minimum Load • No minimum load required Start Up Delay • 2 s max EMC & Safety Start Up Rise Time • 16 ms max Emissions • EN55022, level B conducted & radiated Hold Up Time • 8 ms/40 ms tyapical at full load and 115/230 VAC Harmonic Currents • EN61000-3-2, EN61000-3-3 Line Regulation • ±0.5% max ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Load Regulation • ±1% max Radiated Immunity • EN61000-4-3, 10 V/m 80% mod Transient Response • 4% max deviation, recovery to within Perf Criteria A 1% in 500 μs for a 25% load change EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Ripple & Noise • 3.3-5 V versions: 60 mV pk-pk, all other Surge • EN61000-4-5, installation Class 3, models 1% pk-pk max 20 MHz bandwidth Perf Criteria A Overvoltage Protection • 115-140% Vnom, auto recovery Conducted Immunity • EN61000-4-6, 10 Vrms Perf Criteria A Overload Protection • 135-180% Magnetic Fields • EN61000-4-8, 10 A/m Perf Criteria A Short Circuit Protection • Trip and restart (hiccup mode) Dips & Interruptions • EN61000-4-11, 30% for 10 ms, Temperature • 0.05%/°C 60% for 100 ms, 100% for 5000 ms Coefficient Perf Criteria A, B, B Safety Approvals • EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL ACDC ACDC ECE5/10 Models and Ratings Output Current (3) (2) Output Power Output Voltage Efficiency Model Number (1) Nominal Peak 5.0 W 3.3 VDC 1.51 A 1.96 A 73% ECE05US03†^ 5.0 W 5.0 VDC 1.00 A 1.30 A 77% ECE05US05†^ 5.0 W 9.0 VDC 0.55 A 0.71 A 83% ECE05US09†^ 5.0 W 12.0 VDC 0.41 A 0.53 A 82% ECE05US12†^ 5.0 W 15.0 VDC 0.33 A 0.43 A 83% ECE05US15†^ 5.0 W 24.0 VDC 0.21 A 0.27 A 82% ECE05US24†^ 5.0 W 48.0 VDC 0.10 A 0.13 A 86% ECE05US48†^ 10.0 W 3.3 VDC 2.60 A 3.38 A 73% ECE10US03†^ 10.0 W 5.0 VDC 2.00 A 2.60 A 77% ECE10US05†^ 10.0 W 9.0 VDC 1.11 A 1.44 A 80% ECE10US09†^ 10.0 W 12.0 VDC 0.83 A 1.08 A 84% ECE10US12†^ 10.0 W 15.0 VDC 0.66 A 0.86 A 84% ECE10US15†^ 10.0 W 24.0 VDC 0.41 A 0.53 A 85% ECE10US24†^ 10.0 W 48.0 VDC 0.21 A 0.27 A 86% ECE10US48†^ Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output 3. Average of efficiencies measured at 25%, 50%, 75% & 100% load with power not to exceed nominal power. 230 VAC input. 2. Add suffix-P to model number to denote open frame version. Available for † Available from Farnell & element14. ^ Available from Newark. OEM quantities. Mechanical Details ECE05 ECE10 1.00 (25.4) 0.75 (19.0) 0.6 (15.24) 0.10 (2.5) 1.00 (25.4) 0.60 (15.24) 0.81 (20.7) 2 1 0.10 0.2 (2.7) (5.8) 3 Bottom 1.5 View (38.1) 0.02 1.00 (25.4) (ø0.5) 1.3 0.85 (33.0) 4 0.15 (21.5) (3.9) 0.47 0.2 2 (12.0) (5.08) 1 3 4 5 ø0.04 (ø1.0) 0.12 (3.1) 0.07 (1.8) 0.10 (2.5) See note. 4 0.1 0.6 (15.2) (2.54) ECE05P ECE10P 0.94 (23.9) 1.4 (35.5) 0.07 (1.95) 0.81 (20.76) 1.3 (33.0) 0.06 0.06 (1.65) (1.65) 5 1 23 2 0.15 0.50 (3.9) (12.7) 0.94 0.85 4 0.93 (23.9) (21.5) (23.7) 0.45 0.75 0.84 (11.4) 4 (19.0) (21.5) 0.05 (1.2) 3 1 0.45 0.46 0.05 (11.4) (11.9) (1.5) max max max 0.06 Pin Function 0.04 (1.75) (1.0) max 1 ACN Pin Function 2 ACL 1 ACN 0.03 3 NC 2 ACL (0.8) 4 -Vout 3 -Vout 0.17 (4.4) 5 +Vout ø0.07 (ø1.8) 4 +Vout See note. 4 See note. 4 ø0.04 (ø1.0) Notes 1. All dimensions in inches (mm). 3. Tolerances: x.xx = ± 0.02 (x.x = ± 0.5), x.xxx = ± 0.01 (x.xx = ± 0.25) 2. Weight: ECE05: 0.035 lbs (16 g) ECE10: 0.053 lbs (24 g) 4. ECE05: The solder pads for pins 1 & 2 should have a maximum diameter of ECE05-P: 0.022 lbs (10 g) ECE10-P: 0.031 lbs (14 g) 1.3mm to ensure that the creepage requirements of IEC60950 are met. 15-Aug-12
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ECE have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods