ECS100 - XP POWER - Elite.Parts

Description

XP Power ECS100 Series Power Supply. Input Voltage: 80-264 VAC | Input Frequency: 47-400 Hz | Output Voltage: 12-48 VDC | Operating Temperature: -20 to 70 C | Operating Altitude: 3000 m

Part Number

ECS100

Price

Request Quote

Manufacturer

XP POWER

Lead Time

Request Quote

Category

PRODUCTS - E

Specifications

Conducted Immunity

EN61000-4-6, level 3 Perf Criteria A

Cooling

Convection & fan cooled ratings (see tables)

Dips & Interruptions

EN61000-4-11, 30% 10 ms, 60% 100 ms, 100%5000 ms, Perf Criteria A, B, B, EN60601-1-2, 30% 500 ms, 60% 100 ms, 100%10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation

Drift

±0.2% after 20 min warm up

Earth Leakage Current

230 µA at 264 VAC/60 Hz max.

Efficiency

88% typical

EFT/Burst

EN61000-4-4, level 3 Perf Criteria A

Emissions

EN55022 level B conducted EN55022 level A radiated

Equipment Protection Class

Class I and Class II

Harmonic Currents

EN61000-3-2, class A

Hold Up Time

16/75 ms min at 115/230 VAC

Initial Set Accuracy

±1%

Input Current

1.5 A typical at 115 VAC, full load, 0.9 A typical at 230 VAC, full load

Input Frequency

47-400 Hz (See note 1)

Input Protection

Internal T5 A/250 V fuse in line and neutral

Input Voltage

80-264 VAC (120-370 VDC), derate output power

Inrush Current

40 A max at 230 VAC, cold start 25 ºC

Isolation

4000 VAC Input to Output, 1500 VAC Input to Ground, 500 VDC Output to Ground

Line Regulation

±0.5% max

Load Regulation

±1%

Low Voltage PSU EMC

EN61204-3, high severity level as below

Minimum Load

No minimum load required

MTBF

834 kHrs to MIL-HDBK-217F at 25 ºC, GB 1245 kHrs to Telecordia SR-332 at 25 ºC, GB

Operating Altitude

3000 m

Operating Humidity

95% RH, non-condensing

Operating Temperature

-20 °C to +70 °C derate linearly from +50 °C at 2.5%/°C to 50% load at +70 °C.

Output Voltage

12-48 VDC (see tables)

Output Voltage Trim

±10%

Over/Undershoot

5% typical

Overload Protection

110-150%

Overvoltage Protection

115-140% Vnom, recycle input to reset

Power Density

10 W/in3

Power Factor

EN61000-3-2, class A

Radiated Immunity

EN61000-4-3, level 3 Perf Criteria A

Ripple & Noise

1% pk-pk V1, 20 MHz bandwidth

Safety Approvals

IEC60950-1 CB report, CSA 22.2 No. 60950-1, UL60950-1, TUV EN60950-1 IEC60601-1 CB report, CSA 22.2 No. 60601-1, UL60601-1, TUV 60601-1

Shock

30 g pk, half sine, 6 axes

Short Circuit Protection

Continuous trip and restart (Hiccup mode)

Start Up Delay

1stypical

Start Up Rise Time

50 ms

Storage Temperature

-40 °C to +85 °C

Surge

EN61000-4-5, installation class 3 Perf Criteria A

Switching Frequency

65 KHz typical

Temperature Coefficient

0.05%/°C

Transient Response

4% max. deviation, recovery to within 1% in 500 µs for a 50-75-50% load change

Vibration

2grms,5Hzto500Hz,3axes

Voltage Flicker

EN61000-3-3

Features

80/100 W - Convection/Forced-cooled Ratings
Class I & Class II Construction
Green Mode,
Industry Standard 2” x 4” Package
IT & Medical Safety Approvals
Low Leakage Current

Datasheet

XP-Power=ECS100 Series-Power Supply-datasheet1-1800807730.pdf

399 KiB

Download

Extracted Text

100 Watts xppower.com ECS100 Series • IT & Medical Safety Approvals • Green Mode, <0.5 W Standby Power • 80/100 W - Convection/Forced-cooled Ratings • Class I & Class II Construction • Industry Standard 2” x 4” Package • Low Leakage Current Specification Input General Input Voltage • 80-264 VAC (120-370 VDC), derate output Efficiency • 88% typical power <90 VAC, see derating curve Isolation • 4000 VAC Input to Output, 1500 VAC Input Input Frequency • 47-400 Hz (See note 1) to Ground, 500 VDC Output to Ground Input Current • 1.5 A typical at 115 VAC, full load Sw itching Frequency • 65 KHz typical 0.9 A typical at 230 VAC, full load Power Density • 10 W/in3 Inrush Current • 40 A max at 230 VAC, cold start 25 ºC MTBF • 834 kHrs to MIL-HDBK-217F at 25 ºC, GB 1245 kHrs to Telecordia SR-332 Power Factor • EN61000-3-2, class A at 25 ºC, GB <0.5 W No Load Input Power • Earth Leakage Current • 230 µA at 264 VAC/60 Hz max. Environmental Input Protection • Internal T5 A/250 V fuse in line and neutral Operating Temperature • -20 ˚C to +70 ˚C derate linearly from +50 ˚C at 2.5%/˚C to 50% load at +70 ˚C. Output Cooling • Convection & fan cooled ratings (see tables) Output Voltage • 12-48 VDC (see tables) Operating Humidity • 95% RH, non-condensing Output Voltage Trim • ±10% Storage Temperature • -40 ˚C to +85 ˚C Initial Set Accuracy • ±1% Operating Altitude • 3000 m Minimum Load • No minimum load required Shock • 30 g pk, half sine, 6 axes Start Up Delay • 1stypical V ibration • 2grms,5Hzto500Hz,3axes Start Up Rise Time • 50 ms Hold Up Time • 16/75 ms min at 115/230 VAC E MC & Safety Drift • ±0.2% after 20 min warm up Low Voltage PSU EMC • EN61204-3, high severity level as below Line Regulation • ±0.5% max Emissions • EN55022 level B conducted Load Regulation • ±1% EN55022 level A radiated 5% typical Over/Undershoot • Harmonic Currents • EN61000-3-2, class A Transient Response • 4% max. deviation, recovery to within Voltage Flicker • EN61000-3-3 1% in 500 µs for a 50-75-50% load Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A change EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Ripple & Noise • 1% pk-pk V1, 20 MHz bandwidth EN61000-4-5, installation class 3 Surge • Overvoltage Protection • 115-140% Vnom, recycle input to reset Perf Criteria A Overload Protection • 110-150% C onducted Immunity • EN61000-4-6, level 3 Perf Criteria A Continuous trip and restart (Hiccup mode) Short Circuit Protection • EN61000-4-11, 30% 10 ms, 60% 100 ms, Dips & Interruptions • Temperature • 0.05%/˚C 100%5000 ms, Perf Criteria A, B, B, Coefficient EN60601-1-2, 30% 500 ms, 60% 100 ms, 100%10 ms, 100% 5000 ms, Perf Criteria A, A, A, B - 230 VAC. Consult longform datasheet for 115 V operation. Safety Approvals • IEC60950-1 CB report, CSA 22.2 No. 60950-1, UL60950-1, TUV EN60950-1 IEC60601-1 CB report, CSA 22.2 No. 60601-1, UL60601-1, TUV 60601-1 Notes Equipment Protection • Class I and Class II 1. Safety approvals cover frequency 47-63 Hz. Class ECS100 Models and Ratings Output Power Output Voltage V1 Max Output Current Model Number(1) Forced Cooled (10 CFM) Convection Cooled 100 W 80 W 12.0 VDC 8.3 A ECS100US12 100 W 80 W 15.0 VDC 6.7 A ECS100US15 100 W 80 W 24.0 VDC 4.2 A ECS100US24 100 W 80 W 28.0 VDC 3.6 A ECS100US28 100 W 80 W 48.0 VDC 2.1 A ECS100US48 Notes 1. For covered versions, add suffix ‘-C’ to model number or order part no. ECM40/60 COVER KIT for standalone cover. Not suitable for use in class II installations, derate output by 20% with cover. Mechanical Details 4.00(101.6) 1.25 (31.8) 0.125(3.18) 3.750 (95.25) C4 2.00(50.8) 1.750 (44.45) Voltage Adj. J1 C5 T1 J2 1.00(25.4) 1.01 (25.7) Q1 0.25 Faston 0 .20 (5.1) 0.14 (3.5) 0 .125 (3.1 8) Ground Tab SMD Component Height 4Xø.156(3.96)MountingHoles 0.20 (5.1) ø.312 (7.92) Clearance top and bottom 4.49 (114.0) 2.52 Input Connector Output Connector (64.0) Input Connector J1 Molex PN 09-65-2038 0.25 (0.6) Ground Faston Terminal Pin 1 Line Pin 2 Neutral 0.25” Faston Earth 0.807 Output Connector J2 1.54 (20.50) (39.0) 2xM3x0.5THD Molex PN 09-65-2048 0.16 (4.0) Pin 1 +V1 Max Screw Penetration Pin 2 +V1 Pin 3 RTN 4.055 (103.00) 0.22 Pin 4 RTN (5.5) 4.055 (103.00) 0.22 J1 mates with Molex Housing (5.5) PN 09-50-1031, J2 mates with 0.79 Molex Housing PN 09-50-1041 (20.0) and both with Molex Series 5194 Crimp Terminals 0.984 (25.00) Notes 1. All dimensions in inches (mm). 4xM3x0.5THD Tolerance .xx = ±0.02 (0.50); 0.16 (4.0) Max Screw Penetration .xxx = ±0.01 (0.25) 2. Weight: 0.386 lbs (175 g) Derating Curve 100 100 90 90 Force-cooled >10 CFM 80 80 Convection-cooled 70 70 60 60 Convection-cooled with cover 50 50 40 40 30 80 85 90 264 -20 +40 +50 +60 +70 Input Voltage (VAC) Ambient Temperature (ºC) 04-June-09

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products