HVR250P120CR3F - WICKMANN

Description

FUSE RESETTABLE 120MA 60V RADIAL

Part Number

HVR250P120CR3F

Price

Request Quote

Manufacturer

WICKMANN

Lead Time

Request Quote

Category

PRODUCTS - H

Datasheet

9639946_1.pdf

87 KiB

Download

Extracted Text

® POLYFUSE RESETTABLE FUSES High Voltage SpeciŢ cations No. HVR250 Packaging PTC Device, 60 V / 250 V A: bulk Standard st F: tape and ammo UL 1434 1 Edition CSA C22.2 No. 0 CSA TIL No. CA-3A Materials Approvals Insulating Material: Yellow Epoxy Polymer, cULus Recognition UL 94 V-0 TÜV Round Pins: Copper alloy, tin plated Max. Device Surface Temperature in Tripped State Features 125 °C This product line is designed to provide protec- Operating / Storage Temperature tion against induced AC power current, direct Devices are not intended for power contact and the natural lightning strike. -40 ºC to +85 ºC (consider de-rating) continuous use at 250 V! The HVR250 product line is widely used in the Humidity Ageing Ţ eld of telecommunications and network- +85 °C, 85 % R.H., 1000 hours, ± 5 % typical Dimensions (mm) ing, ISDN and XSDN equipment. It also helps resistance change equipment manufacturers pass ITU K20, K21 and Soldering Characteristics telcordia requirements. Solderability per MIL-STD-202, Method 208E WebLinks Thermal Shock MIL-STD-202F, Method 107G Further info see: www.wickmanngroup.com +125 °C to -40 °C 10 times, ±10 % typical resistance change Further application info see fuseology: Solvent Resistance www.wickmanngroup.com/download/fuseology.pdf MIL-STD-202, Method 215F, no change Marking center-to-center “P”, voltage, amperage rating, lot number Figure 1 Figure 2 Dimensions (mm) Model Fig. A B C D E Physical Characteristics packaging quantity Max Max typ Min Max Lead Material bag ammo HVR250P080C 1 5,8 10,9 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1500 HVR250P080U 1 5,0 9,0 3,8 4,7 5,1 0.65 dia Sn/Cu 500 1500 HVR250P080CF 1 5,8 10,9 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1500 HVR250P110U 1 5,3 9,4 3,8 4,7 5,1 0.65 dia Sn/Cu 500 1500 HVR250P120C 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120U 2 6,0 10,0 3,8 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-RA 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-RC 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-RF 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-R1 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-R2 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120C-R3 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P120CT 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P145C 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P145U 2 6,0 12,5 3,8 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P145C-RA 2 6,8 10,0 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P145C-RB 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P145CT 2 6,8 12,5 5,5 4,7 5,1 0.65 dia Sn/Cu 500 1200 HVR250P180C 2 12,5 12,9 5,5 4,7 5,1 0.65 dia Sn/Cu 200 1000 HVR250P180U 2 10,4 12,6 3,8 4,7 5,1 0.65 dia Sn/Cu 200 1000 HVR250P180CF 1 12,0 13,2 5,5 4,7 5,1 0.65 dia Sn/Cu 200 1000 Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). Model I I V I max. time to trip P Resistance Approvals hold Trip max. ac max. d max. (A) V /V * (A) (s @ A) (W) R (Ω) R (Ω) R (Ω) int op min. max. I max. HVR250P080C 0.080 0.16 250/60 3 3.00 @ 0.35** 1.00 14.0 22.0 33 • • HVR250P080U 0.080 0.16 250/60 3 3.00 @ 0.35** 1.00 15.0 22.0 33 • • HVR250P080CFT 0.080 0.16 250/60 3 3.00 @ 0.35** 1.00 14.0 22.0 33 p • HVR250P110U 0.110 0.22 250/60 3 0.75 @ 1.00 1.00 5.0 9.0 16 p p HVR250P120C 0.120 0.24 250/60 3 1.50 @ 1.00 1.00 4.0 8.0 16 • • HVR250P120U 0.120 0.24 250/60 3 1.00 @ 1.00 1.00 6.0 10.0 16 • • HVR250P120C-RA 0.120 0.24 250/60 3 0.90 @ 1.00 1.00 7.0 9.0 16 • • HVR250P120C-RC 0.120 0.24 250/60 3 0.85 @ 1.00 1.00 5.4 7.5 14 • • HVR250P120C-RF 0.120 0.24 250/60 3 0.70 @ 1.00 1.00 6.0 10.5 16 • • HVR250P120C-R1 0.120 0.24 250/60 3 0.80 @ 1.00 1.00 6.0 9.0 16 • • HVR250P120C-R2 0.120 0.24 250/60 3 0.70 @ 1.00 1.00 8.0 10.5 16 • • HVR250P120C-R3 0.120 0.24 250/60 3 1.00 @ 1.00 1.00 8.0 10.0 16 • • HVR250P120CT 0.120 0.24 250/60 3 0.70 @ 1.00 1.00 7.0 12.0 16 • • HVR250P145C 0.145 0.29 250/60 3 2.50 @ 1.00 1.00 3.0 6.0 14 • • HVR250P145U 0.145 0.29 250/60 3 2.00 @ 1.00 1.00 3.5 6.5 14 • • HVR250P145C-RA 0.145 0.29 250/60 3 2.50 @ 1.00 1.00 3.0 5.5 12 • • HVR250P145C-RB 0.145 0.29 250/60 3 2.00 @ 1.00 1.00 4.5 6.0 14 • • HVR250P145CT 0.145 0.29 250/60 3 2.00 @ 1.00 1.00 5.4 7.5 14 • • HVR250P180C 0.180 0.65 250/60 3 21.00 @ 1.00 1.80 0.8 2.0 4 • • HVR250P180U 0.180 0.65 250/60 10 15.00 @ 1.00 1.80 0.8 2.0 4 • • HVR250P180CF 0.180 0.65 250/60 3 21.00 @ 1.00 1.80 0.8 2.2 4 p • * V :Interrupt Voltage V : Operating Voltage(Vcd) int op ** typcial value NOTE: P = Power dissipated from device when in the tripped state at 20 °C still air. d I = Hold current: maximum current device will pass without tripping in 20 °C still air. R = Minimum resistance of device in initial (un-soldered) state. hold min I = Trip current: minimum current at which the device will trip in 20 °C still air. R = Maximum resistance of device at 20 °C measured one hour after tripping for 20 s. trip 1max I = Maximum fault current device can withstand without damage at rated voltage (V ) Caution:Operation beyond the speciŢ ed rating may result in damage and possible arcing and ţ ame. max max Order Qty. Order- Model Packaging SpeciŢ cations are subject to change without notice. Information Number WebSite Europe Tel: +49 2302 662-107 Americas Tel: +1 404 699-7820 Asia Tel: +852 26 14-1108 China Tel: +86 21 6432-5146 www.wickmanngroup.com E-mail: sales@wickmann.com E-mail: service@wickmannusa.com E-mail: sales@wickmann.com.hk E-mail: sales@wickmann.cn 040621 cURus TÜV ® POLYFUSE RESETTABLE FUSES No. HVR250 Average time-cur rent curve A : HVR250P180C / HVR250P180F B : HVR250P145C C : HVR250P120C D : HVR250P080F Agency SpeciŢ cation Product Lightning Power Cross HVR250P080F ITU K.20/21/45 - 1.5 kV 10/700 µs ITU K.20/21/45 - 230 V ac, 10 Ω HVR250P120C ITU K.20/21/45 - 4 kV 10/700 µs ITU K.20/21/45 - 600 V ac, 600 Ω HVR250P145C HVR250P180C ITU K.20/21/45 - 1.5 kV 10/700 µs ITU K.20/21/45 - 230 V ac, 10 Ω select a speciŢ c part number for HVR250P180F ITU K.20/21/45 - 4 kV 10/700 µs ITU K.20/21/45 - 600 V ac, 600 Ω each application based on the Telcordia GR-974 - 1.0 kV 10/1000 µs Telcordia GR-974 - 283 V ac, 10 A agency request Part-numbering system HVR P F: Tape and ammo packaging Resistance Bin Range (05:0.5 Ohm, 10: 1.0 Ohm) Rx: Resistance Range (x:A-Z or 1-9) T: Pre-tripped device F: Lead free device C: Coated device / U: Uncoated device Current Rating Polyfuse Voltage Rating High Voltage Radial Device Thermal Derating Chart Model Ambient Operation Temperature - I (A) hold -40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C HVR250P080C/U 0.12 0.11 0.09 0.08 0.06 0.05 0.05 0.04 0.03 HVR250P080CF 0.12 0.11 0.09 0.08 0.06 0.05 0.05 0.04 0.03 HVR250P110U 0.17 0.15 0.13 0.11 0.09 0.08 0.07 0.05 0.04 HVR250P120C/U 0.18 0.16 0.14 0.12 0.10 0.09 0.08 0.06 0.05 HVR250P145C/U 0.26 0.20 0.17 0.145 0.12 0.11 0.09 0.08 0.06 HVR250P180C/U 0.27 0.23 0.21 0.18 0.15 0.13 0.19 0.11 0.083 HVR250P180CF 0.28 0.23 0.21 0.18 0.16 0.13 0.10 0.11 0.083 WebSite Europe Tel: +49 2302 662-107 Americas Tel: +1 404 699-7820 Asia Tel: +852 26 14-1108 China Tel: +86 21 6432-5146 040621 www.wickmanngroup.com E-mail: sales@wickmann.com E-mail: service@wickmannusa.com E-mail: sales@wickmann.com.hk E-mail: sales@wickmann.cn

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products