TM wAVETRONIX Click! 304 RS-232 to RS-485 Converter The Click!™ 304 converts half-duplex RS-232 communication to RS-485 communication and vice versa. It also auto-detects baud rates and features LEDs that light up when data is successfully transmitted or received. Features ■ ■ Converts data between RS-232 and Can be configured using Click! Super- RS-485 visor software ■ ■ Mounts to a DIN rail for quick and Uses less than 1 W of power at 24 easy installation volts ■ ■ Autobauds to serial port devices Push-button on the front of the device ■ Meets NEMA TS2 1998 environmen- can reset to factory defaults or start tal specifications autobaud process ■ ■ Conformal coated Activity-indicating LEDs show when ■ Remote upgradeable the device has power and when it is ■ Pluggable screw terminals can be transmitting and receiving data removed for prewiring and are red- keyed to minimize incorrect wiring WX-500-0110 1 Click! 304 Technical Specifications Ordering Information Physical ■ Weight: 0.2 lbs. (0.1 kg) Part Number — WX-CLK-304 ■ Physical dimensions: 4.5 in. × 4 in. × 0.9 in. (11.4 cm x 10.2 cm x 2.3 cm) ■ Ambient operating temp: -29°F to 165°F (-34°C to 74°C) ■ Humidity: up to 95% RH Wavetronix 78 East 1700 South Mounting Provo, UT 84606 ■ DIN rail–mountable Phone: 801-764-0277 ■ Hot-swappable Fax: 801-764-0208 Power Email: sales@wavetronix.com ■ Power supply voltage: 10 to 30 VDC Website: www.wavetronix.com ■ Power consumption: 0.25 W Connections ■ Device has the following connection points: Pocket PC & PC Configuration Software ■ à Power: 5-position connector for connecting from the T-bus Comes with Click! Supervisor, configuration software with the à RS-232: One pluggable screw terminal and a DB-9 following features: connector à Runs on both a Pocket PC and a Windows desktop or à RS-485: 5-position connector for connecting from the laptop PC (Windows 2000 and newer) T-bus as well as one pluggable screw terminal and an RJ- à Configures serial communication settings including the 11 jack serial baud rates à Can remotely and directly upgrade the device firmware to Communication add new features to the device ■ Converts RS-232 to RS-485 and vice versa à Allows users to save a configuration to a file, and to open existing files and save to a device, allowing a common Baud Rates configuration to be easily programmed into many devices ■ Supports the following baud rates: à Has customizable drivers that are stored as XML files that à 1200 bps describe the graphical user interface for that driver à 2400 bps à 4800 bps Remote Upgradeability ■ à 9600 bps Flash memory can be remotely upgraded to add functionality à 19200 bps to the firmware when new features have been developed to à 38400 bps improve the performance of the installation à 57600 bps à 115200 bps NEMA TS2-1998 Testing ■ Complies with the applicable standards stated in the NEMA Configuration Features TS2-1998 Standard ■ ■ Push-button on faceplate does the following: Test results available for each of the following tests: à Resets device to factory defaults à Shock pulses of 10g, 11 ms half sine wave à Autobauds device to match the baud rate of the attached à Vibration of .5 Grms up to 30 Hz serial device à 300 V positive/negative pulses applied at one pulse per ■ LEDs: second at minimum and maximum DC supply voltage à Red LED illuminates when device has power à Stored at -49ºF (-45ºC) for 24 hours à Green LED (TD) illuminates when data is transmitted à Stored at 185ºF (85ºC) for 24 hours à Yellow LED (RD) illuminates when data is received à Operation at -29.2ºF (-34ºC) and 10.8 VDC à Operation at -29.2ºF (-34ºC) and 26.5 VDC à Operation at 165.2ºF (74ºC) and 26.5 VDC à Operation at 165.2ºF (74ºC) and 10.8 VDC 2 www.wavetronix.com TM wAVETRONIX Click! 304 Testing ■ Passes manufacturer’s test before shipping Extended Support ■ Extended support options are available from Wavetronix; contact a Wavetronix representative for more information Warranty ■ One-year warranty against material and workmanship defect 3 Click! 304 Click! 304 Bid Specification 1.0 General. This item shall govern the purchase and instal- munication to half-duplex RS-232 communication, and lation of a serial converter module (SCM) equivalent to the vice versa. Wavetronix Click!™ 304. The SCM shall be used to convert 8.0 Baud Rates. The SCM shall support baud rates of 1200 bps, half-duplex RS-232 communication to 2-wire half-duplex 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps RS-485 communication and vice versa. Test results and other and 115200 bps. documentation demonstrating performance and capabilities shall be provided. 9.0 Configuration Features. The SCM shall have a push-but- ton on the faceplate of the unit that: 2.0 Product Description. The SCM shall be a converter module for use with radar vehicle sensing devices (RVSD) ● Resets to SCM factory defaults equivalent to the Wavetronix SmartSensor™. The SCM shall ● Autobauds the SCM to match the baud rate of the attached be capable of converting half-duplex RS-232 communication serial device and 2-wire half-duplex RS-485 communication and vise versa. The front of the SCM shall include a red power LED, as well All serial ports shall pass data on one port to all other ports. as TX and RX LEDs that shall illuminate when corresponding data is successfully transmitted or received. 3.0 Physical. The SCM shall not exceed 0.2 lbs. (0.1 kg) in weight. 10.0 Configuration Software. The SCM shall be provided with configuration software that: The SCM shall not exceed 4.5 in. × 4 in. × 0.9 in. (11.4 cm x 10.2 cm x 2.3 cm) in its physical dimensions. ● Runs on both a Pocket PC and a Windows desktop or laptop PC (Windows 2000 and newer) The SCM shall operate in the temperature range of -29°F to ● Configures serial communication settings including the se- 165°F (-34°C to 74°C). rial baud rates ● Can remotely and directly upgrade the SCM firmware to 4.0 Mounting. The SCM shall mount to a DIN rail with hot- add new features to the SCM swappable power and communication buses for quick installa- ● Allows users to save a configuration to a file, and to open tion and replacement. existing files and save to a device, allowing a common con- figuration to be easily programmed into many devices 5.0 Power. The SCM shall operate using 0.25 W of average ● Has customizable drivers that are stored as XML files that power at 10 VDC to 30 VDC. describe the graphical user interface for that driver 6.0 Connections. The SCM shall include the following connec- 11.0 Remote Upgradeability. The SCM shall have flash mem- tions for power and communication: ory that can be remotely upgraded to add functionality to the 6.1 Power. The SCM shall include a 5-position connector, firmware when new features have been developed to improve with two contact points reserved for connecting power the performance of the installation. through the bus. 12.0 NEMA TS2-1998 Testing. The SCM shall comply with 6.2 RS-232. The SCM shall feature a DB-9 connector and a the applicable standards stated in the NEMA TS2-1998 pluggable screw terminal for RS-232 communication. Standard. Test results shall be made available for each of the following tests: 6.3 RS-485. The SCM shall feature an RJ-11 jack and a ● Shock pulses of 10g, 11 ms half sine wave pluggable screw terminal for RS-485 communication. ● Vibration of 0.5 Grms up to 30 Hz The 5-position connector shall have three contact points ● 300 V positive/negative pulses applied at one pulse per reserved for connecting RS-485 through the bus. second at minimum and maximum DC supply voltage ● Cold temperature storage at -49°F (-45°C) for 24 hours 7.0 Communication. The SCM shall have the following com- ● High temperature storage at 185°F (85°C) for 24 hours munication capabilities: ● Low temp, low DC supply voltage at -29.2°F (-34°C) and 10.8 7.1 Serial Protocol Conversion. The SCM shall allow VDC communications with any serial device that has a serial ● Low temp, high DC supply voltage at -29.2°F (-34°C) and 26.5 connection by converting 2-wire half-duplex RS-485 com- VDC 4 www.wavetronix.com TM wAVETRONIX Click! 304 ● High temp, high DC supply voltage at 165.2°F (74°C) and 26.5 VDC ● High temp, low DC supply voltage at 165.2°F (74°C) and 10.8 VDC 13.0 Testing. Before shipping, each SCM shall have passed a manufacturer’s test. 14.0 Extended Support. Extended support options shall be available. Contact the manufacturer representative for more information. 15.0 Warranty. The SCM shall be warranted to be free from material and workmanship defects for a period of one year from date of shipment. 5