WAGO 750-815
Specifications
Approvals
ATEX
Baud rate
1.2 (1200) kBaud ... 115.2 (115.2) kBaud
Buscoupler connection
1 x D-SUB 9; socket
Color
light gray
Configuration
automatic and via switches
Conformity marking
CE
Connection method
CAGE CLAMP® CONNECTION
Cross section [AWG]
28 - 14 AWG
Cross section [mm²]
0.08 - 2.5 mm²
Current via power jumper contacts (max)
10
Data memory
32 kByte
Degree of protection
IP 20
Depth
100 mm
3.937 in
Efficiency of the power supply
87 %
EMC marine applications - noise proof
gem. Germanischer Lloyd (2003)
EMC marine applications - noise transmission
gem. Germanischer Lloyd (2003)
Height
2.56 in
65 mm
IEC 61131-3
AWL. KOP. PUP. ST. AS
Input current (max)
500 mA
Input variables
512 Byte
Internal current consumption
350 mA
Isolation
500 V system / supply
Manuals
available as download on the Internet under 'www.wago.com/Service/Download' or on the CD 'ELECTRONICC Tools and Docs' (Item No.: 0888-0412/0001-0101)
Max. length of fieldbus segment
1200 m (depends on the baud rate / on the cable)
Max. no. of I/O modules
64
Max. no. Of I/O points
ca. 6000 (depends on Master)
Max. no. of nodes
99 with repeater
Mounting
TS 35
Operating temperature
0 °C ... + 55 °C
Output variables
512 Byte
Product group
15 (I/O System)
Program memory
32 kByte
Programming
WAGO-I/O-PRO 32
Relative air humidity
95 %
Shock resistance
acc. IEC 60068-2-27
Storage temperature
-25 °C ... +85 °C
Strip length
0.33 in
Strip length from
8 mm
Strip length to
9 mm
Total current for the I/O modules
1650 mA
Transmission medium
shielded Cu-cable 2 (4) x 0.25 mm²
Vibration resistance
acc. IEC 60068-2-6
Voltage supply
DC 24 V (-25% / + 30%)
Voltage via power jumper contacts (max)
DC 24 V (-25% / + 30%)
Weight
205 g
Width
2.008 in
51 mm
Features
- Complex applications can be divided into multiple tasks
- Peripheral equipment can be controlled directly, resulting in faster system response times
- Programmable response in the event of a fieldbus failure
- Signal pre-processing reduces fieldbus transmissions
- Simple, self-sufficient control
- The use of decentralized control can better support a PLC or PC
Datasheet
Wago-750-815-ds1-1713401657.pdf
565 KiB
Extracted Text
4 4 3 3 2 2 1 1 750-812, 750-814, 750-815, 750-816 MODBUS Programmable Fieldbus Controller 1 RS 232/485; 150 (1200) baud ... 19.2 (115.2) Kbaud; digital and analog signals 98 Status 01 02 Modbus voltage supply A ON C -Power jumper contacts B -System TxD D RxD Data contacts 24V 0V CRC Supply Fieldbus 24 V connection 0 V D-Sub I/O RUN + + I/O ERR Supply via power jumper contacts 24 V ADDRESS — — x1 0 Address 0 V x10 0 Address Configuration and programming Power jumper contacts interface The programmable fieldbus controller for MODBUS is an expansion of the Characteristics and use: WAGO-I/O-SYSTEM. • The use of decentralized control can better support a PLC or PC • Complex applications can be divided into multiple tasks This controller combines the WAGO fieldbus coupler for MODBUS with the • Programmable response in the event of a fieldbus failure functionality of a PLC. Programming of the application is performed in • Signal pre-processing reduces fieldbus transmissions accordance with IEC 61131-3. The programmer can access all fieldbus and • Peripheral equipment can be controlled directly, resulting in faster system re- I/O data. sponse times • Simple, self-sufficient control Pack. Item No. Description System Data Unit Contr. MODBUS / RS 485 / 150 ... 19200 Bd 750-812 1 No. of controllers connected to Master 99 with repeater Contr. MODBUS / RS 232 / 150 ... 19200 Bd 750-814 1 Max. no. of I/O points approx. 6000 (depends on master) Contr. MODBUS / RS 485 / 1.2 ... 115.2 kBd 750-815 1 Transmission medium Shielded Cu cable 2 (4) x 0.25 mm² Contr. MODBUS / RS 232 / 1.2 ... 115.2 kBd 750-816 1 Max. length of fieldbus segment 1200 m (depends on baud rate/cable) Contr. MODBUS / RS 485 / 150 ... 19200 Bd/T 750-812/025-000 1 Baud rate 150 (1200) baud ... 19.2 (115.2) Kbaud Operating temperature -20 °C ... +60 °C Buscoupler connection 1 x D-Sub 9; socket Contr. MODBUS / RS 485 / 1.2 ... 115.2 kBd/T 750-815/025-000 1 Programming WAGO-I/O-PRO 32 Operating temperature -20 °C ... +60 °C IEC 61131-3 IL, LD, FBD, ST, FC Pack. Item No. Accessories Unit Miniature WSB Quick marking system plain 248-501 5 with marking see pages 304 ... 305 (Approvals for product variations Approvals upon request) Conformity marking 1 r UL 508 4 r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4 4 EN 60079-15 I M2 / II 3 GD Ex nA nL IIC T4 BR-Ex nA II T4 Shipbuilding see "Approvals Overview" in section 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Phone: +49(0)571/887-0 E-Mail: info@wago.com Subject to design changes 18.02.2010 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com 9 9 8 8 W 750-812 7 7 6 6 5 5 1 99 1 I/O modules 24 V 1 5 24 V 5 V ELECTRONICS 24 V /0 V 10 nF 5 V 0 V 2 6 24 V 24 V FIELDBUS INTERFACE 3 7 0 V 0 V 10 nF 4 8 750-812 Technical Data General Specifications Number of I/O modules 64 Operating temperature 0 °C ... +55 °C ® Fieldbus Wire connection CAGE CLAMP Max. input process image 1024 bytes Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14 Max. output process image 1024 bytes Stripped lengths 8 ... 9 mm / 0.33 in Max. input variables 512 bytes Dimensions (mm) W x H x L 51 x 65 x 100 Max. output variables 512 bytes Height from upper-edge of DIN 35 rail Configuration automatic and via switches Weight 205 g Program memory 32 Kbytes Storage temperature -25 °C ... +85 °C Data memory 32 Kbytes Relative air humidity (no condensation) 95 % Non-volatile memory (retain) 8 Kbytes Vibration resistance acc. to IEC 60068-2-6 Cycle time < 3 ms for 1,000 statements / 256 dig. Shock resistance acc. to IEC 60068-2-27 I/Os Degree of protection IP20 Voltage supply 24 V DC (-25 % ... +30 %) EMC 1-Immunity to interference acc. to EN 61000-6-2 (2005) Max. input current (24 V) 500 mA EMC 1-Emission of interference acc. to EN 61000-6-4 (2007) Efficiency of the power supply 87 % EMC marine applications - Immunity to Internal current consumption (5 V) 350 mA interference acc. to Germanischer Lloyd (2003) Total current for I/O modules (5 V) 1650 mA EMC marine applications - Emission of Isolation 500 V system/supply interference acc. to Germanischer Lloyd (2003) Voltage via power jumper contacts 24 V DC (-25 % ... +30 %) Current via power jumper contacts (max.) 10 A DC FIELDBUS INTERFACE ELECTRONICS
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 750-815 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods