750-347 CANopen ECO Fieldbus Coupler MCS 1 10 Kbaud ... 1 Mbaud; digital and analog signals 130 Status indication CANopen -Fieldbus STOP -Fieldbus note DIP switch for node ID RUN and baud rate TX Data contacts OVERFL RX I/O 01 02 03 04 Marking area Fieldbus connection 231 Series (MCS) Supply Configuration interface 24 V 0 V The ECO fieldbus coupler is designed for applications with a reduced scale I/ The data of the analog modules is stored in the PDOs according to the order in O requirement. Using digital only process data or small amounts of analogs, which the modules are connected to the buscoupler. The bits of the digital mo- while retaining all of the choice that’s offered by the Series 750 I/O. dules are sent byte by byte and also mapped in the PDOs. If the amount of di- The coupler has an integrated supply terminal for the system voltage. The field gital information exceeds 8 bits, the buscoupler automatically starts with a new power jumper contacts are supplied via a separate supply module. byte. The CANopen bus coupler is capable of supporting all I/O modules and au- All entries of the object dictionary can be mapped - as the user likes - in the 5 tomatically configures, creating a local process image. Rx PDOs and 5 Tx PDOs. The local process image is divided into two data zones containing the data re- The complete input and output process image can be transmitted using SDOs. ceived and the data to be sent. The process data can be sent via the CANopen “Spacer modules“ can be set via software. fieldbus to the PLC, PC or NC for further processing, and received from the field via CANopen. Note: EDS files required Pack. Description Item No. System Data Unit CANopen ECO MCS 750-347 1 No. of couplers connected to Master 110 Transmission medium Shielded Cu cable 3 x 0.25 mm² Max. length of bus line 30 m ... 1000 m (depends on baud rate/ cable) Baud rate 10 Kbaud ... 1 Mbaud Buscoupler connection 5-pole male connector, 231 Series (MCS), female connector 231-305/ 010-000 (included) Pack. Accessories Item No. Unit EDS files Download: www.wago.com Miniature WSB Quick marking system plain 248-501 5 with marking see pages 352 ... 353 Approvals Also see "Approvals Overview" in Section 1 Conformity marking 1 Shipbuilding ABS, DNV, GL, KR r UL 508 r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4 4 IEC 60079-0, -15 BR-Ex nA II T4 4 EN 60079-0, -15 I M2 / II 3 GD Ex nA nL IIC T4 EN 61241-0, -1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Phone: +49(0)571/887-0 E-Mail: info@wago.com Subject to design changes 16.05.2012 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com ON 1 2 3 4 5 6 7 8 W 750- 347 1 131 I/O modules 1/2 24 V 24 V 5 V ELECTRONICS 10 nF 1.2 5 V 3/4 0 V FIELDBUS INTERFACE 1) 2) 10 nF 24 V 0 V 1) 1 MΩ 2) 10 nF /500 V 1 2 3 4 750-347 Technical Data General Specifications Number of I/O modules 64 Operating temperature 0 °C ... +55 °C ® Fieldbus Wire connection CAGE CLAMP Max. input process image 32 bytes Cross sections 0.08 mm² ... 1.5 mm² / AWG 28 ... 16 Max. output process image 32 bytes Stripped lengths 5 ... 6 mm / 0.22 in Configuration via PC or PLC Dimensions (mm) W x H x L 50 x 65 x 97 No. of PDOs 5 Tx / 5 Rx Height from upper-edge of DIN 35 rail No. of SDOs 1 server SDO Weight 135 g Communication profile DS-301 V4.1 Storage temperature -25 °C ... +85 °C Device profile DS-401 V2.0 Relative air humidity (no condensation) 95 % Programmable error response Vibration resistance acc. to IEC 60068-2-6 COB ID distribution SDO, standard Shock resistance acc. to IEC 60068-2-27 Node ID distribution DIP switches Degree of protection IP20 Other CANopen features NMT slave EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005) Minimum boot-up EMC: 1 - emission of interference acc. to EN 61000-6-4 (2007) Variable PDO mapping EMC: marine applications Emergency message - immunity to interference acc. to Germanischer Lloyd (2003) Life guarding EMC: marine applications Power supply 24 V DC (-15 % ... +20 %) - emission of interference acc. to Germanischer Lloyd (2003) Input current typ. at rated load (24 V) 260 mA Efficiency of the power supply (typ.) at nominal load (24 V) 80 % Internal current consumption (5 V) 350 mA Total current for I/O modules (5 V) 650 mA FIELDBUS INTERFACE ELECTRONICS