Manufacturers
WAGO 750-303
Description
WAGO's 750-303 PROFIBUS DP/FMS with FIELDCOUPLER, number of I/O modules are 64, the
maximum input process image of 128 bytes, maximum output process image of 128 bytes
plus up version 05xx, and maximum of 64 bytes. Configuration via PC or PLC, power
supply 24VDC (-25% to +30%), maximum input current (24V): 500mA, efficiency of
the power supply is 87%, internal current consumption (5V): 350mA, and the total
current for I/O modules (5V) is 1650mA.
Part Number
750-303
Price
Request Quote
Manufacturer
WAGO
Lead Time
Request Quote
Category
PRODUCTS - 7
Datasheet
Extracted Text
4 4 3 3 2 2 1 1 750-303 PROFIBUS DP/FMS Fieldbus Coupler 1 12 Mbaud; digital and analog signals 102 Status PROFIBUS 01 02 voltage supply A RUN C -Power jumper contacts B -System BF D DIA Data Contacts 24V 0V Supply Fieldbus 24 V connection 0 V D-Sub I/O RUN + + I/O ERR Supply via power jumper contacts 24 V ADDRESS — — x1 0 Address 0 V x10 0 Address Configuration Power jumper contacts interface This buscoupler connects the WAGO-I/O-SYSTEM as a slave to the PROFIBUS The local process image is divided into two data zones containing the data fieldbus. received and the data to be sent. The process data can be sent via the PROFI- The buscoupler automatically configures, creating a local process image which BUS fieldbus to the PLC, PC or NC for further processing, and received from the may include analog, digital or specialty modules. Analog and specialty field via PROFIBUS. module data is sent via words and/or bytes, digital data is sent bit by bit. The data of the analog modules is stored in the process image which is created PROFIBUS stores the process image in the corresponding Master control (PLC, automatically according to the order in which the modules are connected to the PC or NC). buscoupler. The bits of the digital modules are sent byte by byte and added to the analog data. If the amount of digital information exceeds 8 bits, the buscoupler automatically starts with a new byte. When implementing new installations with PROFIBUS DP, please consider 750-333 Fieldbus Coupler with extended functions (page 104). Notice: GSD files required Pack. Description Item No. System Data Unit PROFIBUS DP/FMS 12 MBd 750-303 1 No. of couplers connected to Master 96 with repeater Max. no. of I/O points approx. 6000 (depends on master) Transmission medium Cu cable acc. to EN 50170 Max. length of fieldbus segment 100 m ... 1200 m (depends on baud rate/ cable) Baud rate 9.6 Kbaud ... 12 Mbaud Transmission time typ. 1 ms (10 couplers; 32 digital I/Os per coupler at 12 Mbaud) max. 3.3 ms Buscoupler connection 1 x D-Sub 9; socket Pack. Accessories Item No. Unit GSD files Download: www.wago.com Miniature WSB Quick marking system plain 248-501 5 with marking see pages 352 ... 353 Standards and Approvals Also see "Approvals Overview" in Section 1 Standard EN 50170 Certification PNO Conformity marking 1 Shipbuilding ABS, BV, DNV, GL, KR, LR, NKK, PRS, RINA r UL 508 r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4 4 EN 60079-0, -15 I M2 / II 3 GD Ex nA nL IIC T4 EN 61241-0, -1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 - D-32385 Minden Phone: +49(0)571/887-0 E-Mail: info@wago.com Subject to design changes 16.05.2012 Hansastr. 27 - D-32423 Minden Fax: +49(0)571/887-169 www.wago.com 9 9 8 8 W 750- 303 7 7 6 6 5 5 1 103 I/O modules 24 V 1 5 24 V 5 V ELECTRONICS 24 V /0 V 10 nF 1.2 5 V 0 V 2 6 24 V 24 V FIELDBUS INTERFACE 3 7 0 V 0 V 10 nF 4 8 750-303 Technical Data General Specifications Number of I/O modules 64 Operating temperature 0 °C ... +55 °C ® Fieldbus Wire connection CAGE CLAMP Max. input process image 128 bytes Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14 Max. output process image 128 bytes Stripped lengths 8 ... 9 mm / 0.33 in up version 05xx, max. 64 bytes Dimensions (mm) W x H x L 51 x 65 x 100 Configuration via PC or PLC Height from upper-edge of DIN 35 rail Power supply 24 V DC (-25 % ... +30 %) Weight 190 g Max. input current (24 V) 500 mA Storage temperature -25 °C ... +85 °C Efficiency of the power supply 87 % Relative air humidity (no condensation) 95 % Internal current consumption (5 V) 350 mA Vibration resistance acc. to IEC 60068-2-6 Total current for I/O modules (5 V) 1650 mA Shock resistance acc. to IEC 60068-2-27 Isolation 500 V system/supply Degree of protection IP20 Voltage via power jumper contacts 24 V DC (-25 % ... +30 %) EMC: 1 - immunity to interference acc. to EN 61000-6-2 (2005) Current via power jumper contacts (max.) 10 A DC EMC: 1 - emission of interference acc. to EN 61000-6-4 (2007) EMC: marine applications - immunity to interference acc. to Germanischer Lloyd (2003) EMC: marine applications - emission of interference acc. to Germanischer Lloyd (2003) FIELDBUS INTERFACE ELECTRONICS
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 750-303 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods