VMICPCI-5661 CompactPCI 1 Gigabit Fibre Channel Adapter •Supports 200 Mbyte/s full-duplex communications in all Fibre Channel topologies (100 Mbyte/s simultaneous TX/RX) •Available in two host bus speed versions: — 66 MHz, 64-bit CompactPCI® host bus interface — 33 MHz, 64-bit CompactPCI host bus interface •Compliant with PCI Local Bus speciŢcation revision 2.1 •Support for F-PORT and FL-PORT fabric login •Compliant with ANSI SCSI standards for class 2 and class 3 services: — August 28, 1998 — August 12, 1997 — •Supports Fibre Channel protocol SCSI (FCP-SCSI) and Fibre Channel IP protocols concurrently •Supports TCP and UDP IP services •Supports SCSI initiator/target and target modes (drivers for SCSI initiator Software Support: only) Solaris x86 (SCSI initiator), and many others. See the •On-board, enhanced RISC processor Fibre Channel products area of www.vmicnet.com for •On-board gigabit serial transceivers the complete listing and latest information regarding •Supports PCI dual-address and cache commands software driver support.•No host intervention required to execute complete SCSI and IP operations •Supports multi-ID aliasing TECHNICAL SPECIFICATIONS •Fully backward compatible with 32-bit PCI •Optional copper or Ţber-optic interface Fibre Channel Transfer Rate: 100 Mbyte/s, •Based on QLogic ISP 2200a series chip 200 Mbyte/s (full duplex) INTRODUCTION — The VMICPCI-5661 is a Host Bus Transfer Rate: 64-bit bus master DMA single-board, highly integrated Fibre Channel host bus maximum burst data transfers up to 264 Mbyte/s adapter (HBA) targeted at storage area networks (SANs), (PCI - 64/33 MHz) or 528 Mbyte/s (PCI - 64/66 MHz) network applications, and computer clustering. The HBA Host Bus Signaling: Supports 5 or 3 V signalingconnects the CompactPCI bus to a Fibre Channel loop, fabric, or to a point-to-point network. The VMICPCI-5661 On-Board RAM: 128 Kbyte static RAM maximizes Fibre Channel throughput while minimizing transfer latency and host processor overhead. PHYSICAL/ENVIRONMENTAL PRODUCT OVERVIEW — Temperature Range: 0 to 50 ˚C, operating host bus adapter speciŢcally designed for storage area -40 to 70 ˚C, storage Relative Humidity: 20 to 80 percent, noncondensing enterprise-wide and workgroup conŢgurations which consolidate hard disk arrays and tape library functions at a Power Requirements: Network Connections: suited for telecom, signal processing, and distributed Twinax with HSSDC connector (maximum distance - 30 m) It incorporates a highly integrated, state-of-the-art ASIC Fiber optic (multimode) with SC-type connectors (maximum distance - 500 m) Fiber optic (single-mode) with SC-type connectors dedicated frame buffers optimize PCI bus utilization and (maximum distance - 10 km) enable continuous streaming of data during transfer operations. Simultaneous SCSI I/O commands are completely executed without host system intervention; no more than one system interrupt is generated per complete SCSI I/O. The highly integrated design promotes high VMIC 1 • 12090 South Memorial Parkway • Huntsville, Alabama 35803-3308 reliability, low power consumption, and low cost. commands and data to be processed simultaneously, and the receive buffers. Three independent DMA channels enable a Fibre Channel protocol engine, and dedicated transmit and that contains a 64-bit PCI host interface, an RISC processor, computing applications due to its high network bandwidth. central location. Additionally, the VMICPCI-5661 is well 1 A (maximum) 5 VDC network (SAN) applications. Typical applications include The VMICPCI-5661 is a Linux, Windows NT®, VxWorks, rev. 2.1, September 22, 1997 Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) working draft, Fibre Channel Fabric Loop Attachment (FC-FLA) working draft, rev. 2.7, Fibre Channel Arbitrated Loop (FC-AL-2) working draft, rev. 6.4, VMICPCI-5661 TRADEMARKS Ordering Options May 31, 2000 800-655661-000 B A B C – D E F VMICPCI-5661 – – A = Host Bus Clock Speed CompactPCI is a registered trademark of PCI Industrial 0 = 33 MHz CompactPCI bus 1 = 66 MHz CompactPCI bus B = Front Panel Option are the property of their respective owners.0 = 3U Front Panel 1 = 6U Front Panel C = Transmission Mode 0 = Multimode Fiber-Optic (SC-Type Connectors) 1 = Twinax (HSSDC) 2 = Single-Mode Fiber-Optic (SC-Type Connectors) Connector Data SC to ST Adapter SC Connector AMP 503638-1 (or equivalent)AMP 503948-1 (or equivalent) Cable Specifications Fiber-Optic Cable - Multimode; (62.5 Micron core); Single-Mode (9 Micron core). Fiber-Optic Cable Assemblies A B C – D E F VMICBL-000-F4 – 0 – ABC = Cable Lengths 000 = .5 ft (0.15 m)011 = 350 ft (106.68 m) 001 = 1 ft (.31 m)012 = 500 ft (152.15 m) 002 = 5 ft (1.52 m)013 = 574 ft (175 m) 003 = 10 ft (3.04 m)014 = 656 ft (200 m) 004 = 25 ft (7.62 m)015 = 820 ft (250 m) 005 = 50 ft (15.24 m)016 = 1,000 ft (304.30 m) 006 = 80 ft (24.40 m)017 = 1,148 ft (350 m) 007 = 100 ft (30.49 m)018 = 1,312 ft (400 m) 008 = 150 ft (45.72 m)019 = 1,500 ft (456.45 m) 009 = 200 ft (60.98 m)020 = 1,640 ft (500 m) 010 = 250 ft (76.20 m) Twinax Cable Assemblies A B C – D E F VMICBL-001-33 – 0 – A = 0 (Option reserved for future use) BC = Cable Lengths 00 = Not Used 06 = 10 m 01 = 0.5 m07 = 15 m 02 = 1 m08 = 20 m 03 = 3 m09 = 25 m 04 = 5 m10 = 30 m 05 = 7 m HSSDC-to-HSSDC Cable A B C – D E F Assemblies VMICBL-001-36 – – 003 = 3 m, 30 AWG, without Equalizers 310 = 10 m, 22 AWG, with Equalizers 325 = 25 m, 22 AWG, with Equalizers (All other options not shown above are reserved for future use.) Twinax Adapters HSSDC-to-DB9 Adapter P/N VMICBL-001-34-000 DB9-to-DB9 Splitter Cable P/N VMICBL-001-35-001 See attached topology/cable configuration guide for application of these adapters. For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 E-mail: info@vmic.com Web Address: www.vmic.com Copyright © January 1999 by VMIC Specifications subject to change without notice. 2 For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 Computer Manufacturers’ Group. Other registered trademarks Windows NT is a registered trademark of Microsoft Corporation. The VMIC logo is a registered trademark of VMIC. VMICPCI-5661 Figure 1. Fibre Channel Topology/Cable ConŢguration Guide VMIC 3 • 12090 South Memorial Parkway • Huntsville, Alabama 35803-3308