✄ VMIACC-BT10 DIN Rail Transition Module for Euro-DIN C 64-Pin, C 96-Pin, and C/2 32-Pin Connectors ✪✄✰✮✄✯❊❘�✄✬❙◗❚❊❘ • DIN rail mount (15 or 35 mm) • Interconnects VMIC’s I/O boards with field wiring • Provides easy-to-use lift clamp terminal blocks • High-density design reduces cabinet space • Accepts 24 to 12 AWG • Fits standard DIN rails • Interfaces with most VMIC I/O boards via mass-terminated cables • IEC 664/IEC 664 A/DIN VDE; DIN VDE 0160 (in parts) compliant INTRODUCTION — The VMIACC-BT10 DIN rail transition module provides a high-density, Euro-DIN C connector to three-level terminal transition in an easy-to-use DIN rail mount form factor. As shown in Figure 1, the VMIACC-BT10 simplifies field wiring interfaces by providing convenient lift clamp-style terminals while preserving the space efficiency of a pin-and-socket I/O board interface. I/O boards and transition modules can be interconnected by either cost-effective mass-terminated flat Depth: 2.73 in. (mounted) cables, or by specialty cables as the application demands. The following VMIC I/O boards are directly compatible with Screw: M3 these modules. Maximum Wire Diameter: Solid wired from 0.2 to COMPATIBLE I/O BOARDS 4 mm (12 to 22 AWG). Fine stranded wire from 0.2 to VMIVME-1101 VMIVME-2200 VMIVME-3128 2 2.5 mm (12 to 24 AWG). VMIVME-1110 VMIVME-2210 VMIVME-3413 VMIVME-1111 VMIVME-2510B VMIVME-3417A TERMINAL BLOCK MATERIALS VMIVME-1128 VMIVME-2511 VMIVME-3418 VMIVME-1129 VMIVME-2528 VMIVME-3419 Clamp: Steel, galvanized, and chromated VMIVME-1130 VMIVME-2131 VMIVME-3451 VMIVME-1150 VMIVME-2532A VMIVME-3456 Wire Protection: CuZn, brass, prenickeled, and VMIVME-1160A VMIVME-2533 VMIVME-3457 5 µ tin-plated VMIVME-1182 VMIVME-2536 VMIVME-3459 VMIVME-2120 VMIVME-2540 VMIVME-4140 Screw: Steel, galvanized, and chromated VMIVME-2127 VMIVME-3113A VMIVME-2128 VMIVME-3118 TRADEMARKS VMIVME-2131 VMIVME-3122 VMIVME-2170A VMIVME-3126A The VMIC logo is a registered trademark of VMIC. Other registered trademarks are the property of their COMPATIBLE I/O CABLES respective owners. Number of Connector Cable Pins Type 64 pin IDC VMIVME-000-64-xxx 96 pin IDC VMIVME-000-96-xxx C/2 32 pin IDC VMIVME-000-32-xxx Ordering Options ELECTRICAL DATA June 10, 2002 800-800563-000 B ABC – D E F VMIACC-BT10 – – The ampacity of the transition panel is limited by the A = Male or Female DIN connectors of 1 A per terminal. 0 = Female 1 = Male Maximum Current: 1 A per terminal BC = Number of Pins 32 = Euro-DIN C/2 32-Pin Connector 64 = Euro-DIN C 64-Pin Connector Maximum Voltage: 125 VAC 96 = Euro-DIN C 96-Pin Connector For Ordering Information, Call: PHYSICAL CHARACTERISTICS 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 E-mail: info@vmic.com Web Address: www.vmic.com Copyright © February 1999 by VMIC Width: 6.65 in. (C 96), 5.321 in. (C 64 and C/2 32) Specifications subject to change without notice. Height: 3.03 in. VMIC • 12090 South Memorial Parkway • Huntsville, Alabama 35803-3308 1 ✄ VMIACC-BT10 ✪✄✰✮✄✯❊❘�✄✬❙◗❚❊❘ C 64 and C/2 32: 5.32 in. (135 mm) C 96: 6.65 in. (68.91 mm) 3.03 in. (77 mm) 2.73 in. (69.5 mm) 2.83 in. (72 mm) Mounted on Rail Figure 1. VMIACC-BT10 DIN Rail Transition Module 2 For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859