PRODUCT DATA SHEET ™ SLI (SHB Express ) SYSTEM HOST BOARD ® ® Dual-Core Intel Xeon LV Processor Dual Channel DDR2-400 Memory Interface Dual USB Interfaces (Rev. 2.0) Dual Ultra ATA/100 Interfaces Up to 8GB Dual Serial ATA/150 Interfaces Dual USB Ports (Rev. 2.0) UXGA Interface Dual Full-Speed 10/100/1000Base-T Ethernet Interfaces ™ ™ Power & Backplane I/O Connector C PCI Express Connector B PCI Express Connector A TM TM Trenton's SLI system host board (SHB) features a dual- PCI EXPRESS INTERFACES: PCI EXPRESS CONFIGURATION AND BUS SPEEDS: core processor with advanced power management High-speed serial links that make up PCI Express(PCIe) interfaces PCI Express - Edge Connectors A & B - Two x8 links, one x4 link ® ® capability. The SLI's Dual-Core Intel Xeon LV processor typically have data rates twice that of PCI interfaces. A basic PCIe link - Five reference clocks delivers superior processing capability and system consists of at least one pair of differentially driven transmit and receive PCI Express - (on-board only) - One x4 link performance using about half as much power as compared signal lines. PCI Express link bandwidth is increased linearly by adding PCI-X (on-board only) - 64-bit/66MHz to previous generations of low voltage Intel Xeon signal pairs to form multiple lanes or wider lane widths. The most PCI (on-board only) - 32-bit/33MHz ® processors. The SLI is a server-class PICMG 1.3 SHB common PCIe links used today are configured to have lane widths of Hub Link 1.5 - 266MB/s x1, x4, x8 or x16. Trenton's SLI system host board provides two x8 System or FSB - 667MHz that supports one x4 and two x8 PCI Express links to a PCI Express links, one x4 PCI Express link and five PCIe reference PICMG 1.3 backplane. An additional x4 PCIe link to a SERIAL ATA/150 PORTS (DUAL): clocks on edge connectors A and B. Trenton's optional IOB31 module backplane is available using Trenton's IOB31 expansion used with the SLI provides an additional x4 PCIe link to the backplane. module. These links support PCI Express, PCI and PCI-X The primary and secondary Serial ATA (SATA) ports on the SLI boards The PCI Express links are used on PICMG 1.3 backplanes to support comply with the SATA 1.0 specification and support two independent option cards on a PICMG 1.3 server-class backplane. PCI Express option cards and bridge chips that provide PCI/PCI-X SATA storage devices such as hard disks and CD-RW devices. SATA option card support. During system initialization the SLI automatically technology provides lower-pin counts, reduced signaling voltages, PROCESSOR: negotiates with the PCI Express cards connected to the PCIe links in simplified cabling, CRC error detection and hot-plug device support. ® ® order to set up communication between the devices. The net result is Dual-Core Intel Xeon LV Processor at 1.66GHz to 2.0GHz* SATA produces higher performance interfacing by providing data transfer that the SLI system host board supports communication to x1, x4, x8, Processor Package: Micro-FCPGA (478-pin) rates up to 150MB per second on each port. x16 PCI Express boards as well as PCI/PCI-X cards via PCI Express-to- *Higher speeds as available PCI/PCI-X bridge chip technology on the backplane. DUAL ETHERNET INTERFACES -10/100/1000BASE-T: ® ® The Dual-Core Intel Xeon LV processor on the SLI supports a 667MHz The SLI uses an internal PCI-X bus to connect the I/O Controller hub ® DDR2-400 MEMORY: system bus as well as the Intel Chip Multi-Processing (CMP) based ® to the Ethernet controller chip. This design feature provides high-speed architecture. Intel CMP makes dual-core functionality possible. This The DDR2-400 interface is a dual channel interface originating at the dual Gigabit Ethernet on LAN ports 1 and 2. The SHB also supports new architecture along with the processors' advanced power manage- Memory Controller hub with each channel terminating at two DIMM 10Mb/s or 100Mb/s Ethernet networks. RJ-45 connectors on the I/O ment optimizes the CPUs millions of instructions per second per watt module sockets, for a total of four memory sockets. The SLI uses ECC bracket provide the mechanical interface to the Ethernet networks. (MIPS/Watt) specification which in turn maximizes the SLI's system registered Pc2-3200 DIMMs and supports a maximum memory capacity performance without generating excessive heat. Other processor of 8GB and a minimum memory interface bandwidth of 3.2GB/s per features include: channel. The total effective memory interface bandwidth increases to 6.4GB/s when at least one PC2-3200 DIMM is used in each memory • Dual Core, 2MB L2 Cache channel. • 31W Thermal Design Power • Enhanced Intel SpeedStep Technology (EIST) STANDARDS: CHIPSET: ™ • PCI Express Base Specification 1.0a ™ ® • SHB Express System Host Board PCI Express Specification - Increased system performance is made possible by the Intel E7520 ® PCI Industrial Computer Manufacturers Group (PICMG ) 1.3 chipset's ability to support a 667MHz system bus. The chipset config- uration on Trenton's SLI board supports two registered DDR2-400 memory channels. Data bottlenecks are reduced by the three PCI ™ Express interfaces that provide high bandwidth (4GB/s)connections between the ports on the Memory Controller Hub (MCH) and external Dependable, always. I/O devices or option cards. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com PRODUCT DATA SHEET DIMM Module Sockets Dual-Core MCH ® DDR-B 1B & 2B Intel Channel B ® Xeon DDR2-400 Memory Controller Hub LV Processor 3200MB ® Bandwidth* Intel mPGA479M Socket E7520 DIMM Module Sockets 667MHz Front Side Bus DDR-A 1A & 2A Channel A HubLink 1.5 DDR2-400 PCI Express x8 *Single Channel operations. SMBus Memory bandwidth typically doubles PCI Express x8 Edge Connectors in dual channel operations. A and B PCI Express x4 Controlled Impedance Connector HubLink 1.5 PCI Express x1 Video PCI 32-bit/33MHz Controller Ultra XGA IOB30 LPC Bus PCI LPC ATI Monitor Optional M1 FWH I/O FirmwareHub ® Board Intel LAN 1 82802 Ethernet PCI-X PCI-X 64-bit/66MHz Controller 10/100/1000 SMBus SMBus Base-T Intel To Edge 82546EB LAN 2 IDE Connector A Serial ATA E6300ESB Primary Primary I/O IDE Controller Serial ATA Optional Secondary Secondary Hub Backplane Routing Edge Connector C I/O NLT USB 0 USB 2 USB Ports Bracket USB 1 USB 3 Headers Intel FW80001ESB ULTRA XGA INTERFACE: SLI APPLICATION CONSIDERATIONS: ADDITIONAL SLI FEATURES: ® ™ ™ The SLI is equipped with the third generation ATI RAGE MOBILITY Power Requirements: System Hardware Monitor: MI video controller. The M1 enables 2D/3D video acceleration and • The functions monitored are: Typical Values - CPU Idle State: provides 8MB of integrated video memory. In 2D mode the video - Voltage: +3.3V, +/-12V, +5V and VCORE CPU +5V +12V +3.3V controller supports pixel resolutions up to 1600 x 1200, and in 3D - Fan speed 1.66GHz 3.00A 1.30A 3.00A mode the maximum resolution provided is 1280 x 1024. The - Temperature 2.0GHz 3.00A 1.65A 3.00A maximum color depth supported at these extremes is 16.7 million I/O Features: Typical Values - 100% CPU Stress State: colors. Software drivers are available for popular operating systems. • Two EIDE Ultra ATA/100 interfaces CPU +5V +12V +3.3V • Optional IOB30 I/O plug-in expansion board includes: 1.66GHz 3.00A 2.20A 3.25A QUAD UNIVERSAL SERIAL BUS INTERFACES (USB 2.0): - Enhanced bi-directional parallel interface 2.0GHz 3.00A 2.60A 3.25A - PS/2 mouse and keyboard interface (mini DIN connector) Two USB 2.0 interface ports are located on the I/O bracket of the SLI. -12V @ < 100mA - Floppy drive interface Two additional USB 2.0 headers are available on the SHB. Ask Tolerance for all voltages is +/- 5% and must be applied by the - Two high-speed serial ports Trenton about optional USB routing to the backplane via SLI edge PICMG 1.3 backplane to edge connector C. Watchdog Timer: connector C. Temperature/Environment: • The programmable watchdog timer is supported directly by the Operating Temperature: 0˚ to 60˚ C. BIOS (FLASH): I/O Controller Hub. Two operating modes, free-running and Airflow Requirement: 350LFM continuous airflow when one-shot, are available with this two-stage watchdog timer. ® The SLI uses AMIBIOS8 ; the flash BIOS resides in the SHB's using the passive heat sink Stage one can generate IRQ, SMI or SCI. Stage two generates Firmware Hub (FWH). AMIBIOS8 contains features such as: Storage Temperature: -40˚ to 70˚ C. a programmable watchdog timer reset with a total range of • Support for flash devices for BIOS upgrading Humidity: 5% to 90% non-condensing 1ms to 10 minutes. Mechanical: • Integrated support for USB mass storage devices such as ORDERING INFORMATION: PASSIVE COOLING SOLUTION: The SLI has a board stack-up height USB, CD-ROM, CD-RW, etc. of .76" (1.93cm) with the SHB's passive heat sink cooling solution. • Boot from network, USB mass storage devices, IDE or ATAPI Model Name: SLI Airflow of at least 350LFM must always be present across the SHB's • Serial port console redirection to support headless operation Model # CPU Speed Embedded CPU passive heat sink. (requires optional IOB30, part number 6391-000) 6521-104-xM 1.66GHz Yes ACTIVE COOLING SOLUTION: The SLI's optional active cooling solution • SATA/ATA/ATAPI support includes 48-bit LBA addressing to 6521-106-xM 2.0GHz Yes has a cooling fan mounted on the passive heat sink resulting in a support SATA/ATA/IDE hard drive capacities over 137GB (xM = Memory) board stack-up height of 2.3" (5.84cm). Order the SLI with active The stated bus speed, memory and communication interface speeds are component AGENCY APPROVALS: cooling when 350LFM or more of continuous airflow is not available maximums; actual system performance may vary. for the processor. Designed for UL60950, CAN/CSA C22.2 No. 60950-00, Intel, Intel CMP, Intel EIST and Intel Xeon are trademarks or registered trademarks of The overall SLI dimensions are 13.330" (33.86cm) L x 4.976" EN55022:1998 Class B, EN61000-4-2:1995, EN61000-4-3:1997, Intel Corporation. All other product names are trademarks of their respective owners. (12.64cm) H. The relative PICMG 1.3 SHB height off the backplane EN61000-4-4:1995, EN61000-4-5:1995, EN61000-4-6:1996, Copyright ©2006 by TRENTON Technology Inc. All rights reserved is the same as a PICMG 1.0 SBC due to the shorter PCI Express EN61000-4-11:1994 backplane connectors. Dependable, always. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com 8416521 04266 1.0