PRODUCT DATA SHEET ™ XPT DUAL XEON SINGLE BOARD COMPUTER DDR200/266 Memory Up to 8GB +12V Connector Dual Ultra ATA/100 Interfaces Dual USB Ports Enhanced Bi-Directional Serial Ports (Rev 1.1) Parallel Interface Speaker Header UXGA Interface PS/2 Mouse and Keyboard Interface Dual Full-Speed 10/100/1000 Base-T Ethernet Interfaces ® ™ Memory Controller Hub PICMG Connector Dual Xeon Processors ISA Bus Chassis Plans’ heritage of delivering innova- E750I CHIPSET: EIDE ULTRA ATA/100 INTERFACES (DUAL): tive, applied computing solutions continues with The chipset supports a 400/533MHz system bus, DDR200/266 Dual high-performance PCI EIDE interfaces are capable of the XPT single board computer. The XPT takes memory with ECC and a high-speed Hub Link 2.0 interface. supporting up to two IDE disk drives each in a master/slave the level of processing power available in SBCs configuration. The interfaces support Ultra ATA/100 with DUAL ETHERNET INTERFACES — 10/100/1000BASE-T: ™ synchronous ATA mode transfers up to 100MB per second. to unheard of levels. Dual Xeon processors, ® The XPT has an internal PCI-X bus that connects to Intel's 82546EB the Intel E7501 chipset, a 533MHz system bus, BUS SPEEDS: Ethernet Controller chip. This board design feature provides high-speed dual Gigibit Ethernet ports, advanced video and ISA - 16-bit/8MHz dual Gigabit Ethernet on LAN ports 1 and 2. The XPT also supports I/O features make the XPT the ideal choice in existing 10Mb/s or 100Mb/s Ethernet networks over the same PCI - 32-bit/33MHz, 32-bit/66MHz applications that demand multi-processing func- internal PCI-X bus. RJ-45 connectors located on the I/O bracket - 64-bit/33MHz, 64-bit/66MHz ® tionality in a PICMG form factor. Like all provide the mechanical interface to the Ethernet networks. PCI-X - 64-bit/66MHz, 64-bit/100MHz, Chassis Plan’s products, the XPT is quality built - 64-bit/133MHz DUAL ULTRA 320 SCSI INTERFACES: in our U. S. manufacturing facility with fast, Hub Link 2.0 - 1GB/s The Ultra320 SCSI interfaces use a dual-channel Adaptec AIC-7902 dependable delivery schedules. System or FSB - 400/533MHz SCSI controller chip. The SCSI interfaces use the SBC’s internal PCI-X bus to maximize device data transfer speeds. The maximum PROCESSOR: BIOS (FLASH): data transfer speed is 320MB/s and up to 15 SCSI devices per ® ® ™ Dual Intel Xeon processors at 2.0GHz to 3.06GHz* The XPT uses the AMIBIOS8 . The flash BIOS resides in the 82802 interface are supported. The interfaces comply with the SPI-3 Processor Package: FC-mPGA2 package (604-pin) Firmware Hub (FWH). AMIBIOS8 contains important features such as: standard and are compatible with both single-ended and Low *Higher speeds as available Voltage Differential (LVD) SCSI I/O. Software drivers are available • Boot from USB mass storage devices, SCSI, IDE or ATAPI for most popular operating systems. The SBC is available without • Boot from network LAN (optional) The Xeon processors used on the XPT support a 533MHz system the SCSI interfaces. ™ • Serial port console redirection to support headless operation bus as well as Intel’s NetBurst Micro-architecture. Both features • PCI bus support includes 64-bit & PCI-X capability combine to provide robust performance and fast program execution. DDR200/266 MEMORY: Some of the processor features that enable such performance •ATA/ATAPI support includes 48-bit LBA addressing to support The DDR memory interface on the XPT consists of two channels, enhancements are: ATA/IDE hard drive capacities over 137GB each terminating at a pair of DIMM module sockets. The XPT • Integrated support for USB mass storage devices such as • Hyper-Pipelined technology supports auto detection of up to 8GB of memory. The system BIOS USB CD-ROM, CD-RW, etc. • Streaming SIMD Extensions 2 (SSE2) automatically detects memory type, size and speed. The four • Fast POST support • Advanced Dynamic Execution memory sockets on the SBC must be populated in pairs, beginning • 512K Advanced Transfer Cache (L2) with the sockets in Bank 1, and must contain ECC registered • 12K trace and data cache (L1) PC1600 or PC2100 DIMMS. All DIMMS must be the same speed (PC1600 or PC2100). The modules within a pair must be the Intel’s Hyper-Threading technology makes a single Xeon processor same size; however, if two pairs are used, each pair can contain appear as two logical processors. The XPT’s two physical processors a different size module. The maximum memory capacity of the will function as four logical processors in applications optimized for XPT is 8GB and the minimum interface bandwidth is 1600MB/s. Hyper-Threading. Your Custom Industrial Computer Solution CHASSIS PLANS • 8295 Aero Place, Suite 200, San Diego, CA 92123 • Sales: (858) 571-4330 • Fax: (858) 571-6146 Web: www.chassisplans.com PRODUCT DATA SHEET DIMM Module Sockets Bk 1 - A & B DDR-A MCH Xeon™ Xeon™ Channel 1 DDR200/266 Processor 1 Processor 2 1600MB or Memory Controller Hub Socket 604 Socket 604 2100MB Bandwidth DIMM Module Sockets Intel E7501 Bk 2 - A & B DDR-B Hub B Channel 2 Hub A DDR200/266 400/533MHz 64-bit/100MHz On-Board Hardware External SMBus PCI-X Bus Monitor Monitor Hub Link A Hub Link B P64H2 B Port Winbond PCI/PCI-X Dual W83783S SCSI CH 0 64-bit Hub Ultra320 A Intel SCSI FWH Hub Link LPC Bus 82870P2 Controller Firmware Hub SCSI CH 1 PCI Adaptec Intel 82802 AIC-7902 SMBus 32-bit/33MHz On-Board PCI Bus Super Mouse/ LAN 1 I/O Ethernet Keyboard LPC Port LPC Bus Controller 10/100/1000 Base-T Serial Speaker Intel ICH3 PCI-ISA Video Port 1 Header 82546EB LAN 2 I/O Bridge Controller Controller Winbond Serial IDE ATI W83628F Hub Port 2 Primary M6-C16H W83629F PCI/PCI-X Bus Parallel IDE To Port Secondary Backplane ISA Bus Intel Floppy SMSC USB 0 Ultra XGA 82801CA Port LPC47B272 USB 1 Monitor ULTRA XGA INTERFACE: XPT APPLICATION CONSIDERATIONS: AGENCY APPROVALS: The ATI M6-16H video controller enables 2D/3D video acceleration Power Requirements: • Designed for UL1950, CAN/CSA C22.22 No. 950-95, and provides 16MB of integrated video DDR memory. The video Typical Values EN55024:1998; EN55022:1998 Class B; EN61000-3-2: 2000, controller supports pixel resolutions up to 1600 x 1200. Software EN61000-3-3: 1995 CPU +5V* +12V** +3.3V* drivers are available for most popular operating systems. 3.06GHz 4.10A 14.75A 1.41A ORDERING INFORMATION: 2.8GHz 4.10A 13.15A 1.41A ADDITIONAL XPT FEATURES: 2.4GHz 4.10A 9.90A 1.40A Model Name: XPT 2.0GHz 3.80A 8.20A 1.10A System Hardware Monitor: Model # CPU Speed FSB Speed -12V @ <100mA* • The Winbond W83793S chip supports hardware monitoring. with SCSI ® *From backplane via PICMG connector The functions monitored are: S6090-108-xM 3.06GHz 533MHz ** From ATX12V power supply or equivalent via P24 connector S6090-107-xM 2.8GHz 533MHz -Voltage: +3.3V, +/-12V, +5V and VCORE S6090-104-xM 2.4GHz 533MHz The Xeon processor’s power requirements created the need for an - Fan speed S6090-002-xM 2.0GHz 400MHz additional on-board 4-pin connector (P24). This connector requires -Temperature without SCSI +12V from an external power supply that conforms to the ATX12V S6090-128-xM 3.06GHz 533MHz Watchdog Timer: power specification. This external power supply should have a minimum S6090-127-xM 2.8GHz 533MHz • The programmable watchdog timer provides a system reset wattage rating of a least 250W. The XPT also requires that +3.3V be S6090-124-xM 2.4GHz 533MHz with a total range of 30ms to 60 seconds. The programmable S6090-022-xM 2.0GHz 400MHz applied to the backplane from the power supply. increments of the watchdog are 30ms, 10s and 60s. (xM = Memory) Temperature/Environment: Intel, Xeon and NetBurst are trademarks or registered trademarks of Intel Corporation. Operating Temperature: 0° to 45° C. I/O Features: All other product names are trademarks of their respective owners. Storage Temperature: - 40° to 70° C. •Two high-speed serial ports Humidity: 5% to 90% non-condensing Copyright ©2003 by CHASSIS PLANS. All rights reserved. • Enhanced bi-directional parallel interface • Dual Universal Serial Bus (USB, Rev 1.1) A Xeon processor can consume as much as 70 watts each of power • PS/2 mouse/keyboard interface on the XPT. The XPT's cooling system consists of an air duct assembly • Floppy drive interface attached to the SBC, a high-realibity cooling fan mounted to the air duct intake, and passive heat sinks mounted to each processor. The STANDARDS: fan maintains air movement over the processors’ passive heat sinks and the air duct assembly directs the airflow over critical components. • IEEE P996, Personal Computer Bus Standard Warm air is exhausted from vents located on the SBC’s I/O bracket. • PCI Local Bus Specification 2.1 ® • PICMG 1.0 Specification Mechanical: Your Custom Industrial Computer Solution • PCI-SIG, PCI-X Addendum to the PCI Local Bus Specification In a typical PCI/ISA backplane, the XPT's air duct design enables Rev. 1.0b placement of half-size PCI cards approximately 2.3" (58.4mm) or three slots away from the SBC. Full-length cards can be placed four slots away in the backplane or approximately 3.2" (81.3mm) from the XPT. CHASSIS PLANS • 8295 Aero Place, Suite 200, San Diego, CA 92123 • Sales: (858) 571-4330 • Fax: (858) 571-6146 Web: www.chassisplans.com 8416090 03173 1.0