PRODUCT DA PRODUCT DAT TA SHEET A SHEET T4I SINGLE BOARD COMPUTER +12V Connector DDR200/266 Memory Ultra160 SCSI Floppy Drive Interface Dual USB Ports Dual Ultra ATA/100 Serial Ports (From ATX12V) Up to 2GB Interface (Rev 2.0) EIDE Interfaces Enhanced Bi-Directional Parallel Interface PS/2 Mouse and Keyboard Interface Speaker Header SXGA Interface LAN 2 - 10/100/1000 Base-T Ethernet Interface LAN 1 - 10/100 Base-T Ethernet Interface ® ® Pentium 4 Processor PICMG Connector Memory Controller Hub SCSI Controller ISA Bus I/O Controller Hub AMI Flash BIOS (Socket 478) The T4I single board computer brings an CHIPSET: BUS SPEEDS: increased level of longevity and innovation to The chipset supports a 400/533MHz system bus, a maximum ISA - 16-bit/8MHz ® Pentium 4 applications. When designing a of two double-sided DIMMs with unbuffered DDR 200/266PCI - 32-bit/33MHz new system or upgrading an older PCI/ISA (PC1600/PC2100) memory with ECC and a 266MB/s Hub Hub Interface - 266MB/s computing system, the T4I’s Pentium 4 processor Interface to the ICH4 I/O Controller. System or FSB - 400MHz/533MHz and 845-E chipset provide the ability to deploy ULTRA160 SCSI INTERFACE: BIOS (FLASH): long-life, state-of-the-art technology in a wide variety of robust applied computing applications. The T4I uses AMIBIOS8. The flash BIOS resides in the 82802 The Ultra160 SCSI interface uses an Adaptec AIC-7892 SCSI Firmware Hub (FWH). AMIBIOS8 contains useful features controller chip and supports SCSI device data transfer operations such as: up to 160MB/s. The interface supports up to 15 SCSI devices, PROCESSOR: complies with the SPI-3 standard and is compatible with both • CMOS setup for system parameters ® ® Intel Pentium 4 processor at 2.0GHz to 3.06GHz* single-ended and Low Voltage Differential (LVD) SCSI I/O. • Peripheral management for configuring on-board peripherals ® ® Intel Celeron processor at 2.0GHz* Software drivers are available for most popular operating systems. • PCI-to-PCI bridge support and PCI interrupt steering *Higher speeds as available • Support for flash devices for BIOS upgrading via floppy DUAL ETHERNET INTERFACES: interface The Pentium 4 processor supports a 400/533MHz system bus as well as Intel’s NetBurst™ micro-architecture. Both features LAN 1 provides a 10/100Base-T Ethernet interface using Intel’s Some of the new AMIBIOS8 features supported on the T4I combine to provide optimum system performance and fast 82562ET Platform LAN Connect device and the ICH4 I/O Controller include: program execution in a PCI/ISA single board computer. Hub. The 82562/ICH4 combination provides high-speed data • Integrated support for USB mass storage devices such as Some of the processor features that enable such performance transfers while offloading communication tasks from the system USB CD-ROM, CD-RW, etc. enhancements are: CPU. LAN 2 supports both 10/100Base-T and 1Gigabit Ethernet • Faster POST execution • Hyper-Pipelined technology interfaces via Intel’s 82540 controller. • Improved BIOS code modularity which streamlines the • Streaming SIMD Extensions 2 (SSE2) BIOS customization process while offering a higher degree • Advanced Dynamic Execution EIDE ULTRA ATA/100 INTERFACES (DUAL): of BIOS customization • 512K Advanced Transfer Cache (L2) Dual high-performance PCI EIDE interfaces are capable of • Execution Trace Cache that stores up to 12K of supporting up to two IDE disk drives each in a master/slave micro-operations and an 8K Data Cache (L1) configuration. The interfaces support Ultra ATA/100 with Intel's Hyper-Threading technology makes the Pentium 4, 3.06GHz synchronous ATA mode transfers up to 100MB per second. processor appear as two logical processors. The operating system and application must be optimized for Hyper-Threading. This feature DDR200/266 MEMORY: delivers faster program execution by enabling simultaneous The DDR200/266 interface is a single-channel interface coming instruction processing using the two logical processors. off the Memory Controller hub and terminating at two DIMM module sockets. The DIMM sockets can be independently CACHE MEMORY (L2 AND L1): populated with either PC1600 or PC2100 unbuffered memory The Pentium 4 processor supports a 512K integrated on-die modules with ECC. The memory interface supports auto detection Advanced Transfer Cache (L2). The cache is an 8-way set of memory up to 2GB. Depending on the processor’s system bus associative cache running at full processor core frequency. The speed and which memory module type is used, the memory Celeron processor supports a 128K integrated on-die Advanced interface bandwidth is either 1600MB/s or 2100MB/s. Dependable, always. Dependable, always. Dependable, always. Transfer Cache (L2). Both processors include a 12K level one (L1) Execution Trace Cache and 8K L1 data cache. TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com PRODUCT DATA SHEET ADDR MCH DIMM Module Sockets ® ® Memory Pentium 4 or Celeron (2) DDR DATA Controller Hub Processor DDR200/266 1600MB or Socket 478 2100MB CNTL Intel Bandwidth 82845-E Hardware LAN 1 Monitor SMBus Ultra160 SCSI Interface Winbond W83783S FWH Hub Link Ethernet SCSI Ethernet Firmware Connectivity Controller Controller Hub LAN 2 Intel Adaptec Intel 82562ET AIC-7892 82540 External Intel Hub Link Monitor 10/100 Ultra160 10/100 1000 82802 Port SMBus LAN To Super PCI Mouse/ Backplane I/O 32-bit/33MHz PCI Bus Keyboard LPC Port LPC Bus Serial Speaker ICH4 Video PCI-ISA Port 1 Header I/O Controller Bridge Controller Serial IDE Winbond Port 2 Hub W83628/ Primary Intel 69030 W83629 Parallel IDE Port Secondary ISA Bus To Floppy SMSC Intel USB 0 Backplane Super XGA LPC47B272 Port 82801DB USB 1 Monitor SUPER XGA INTERFACE: T4I APPLICATION CONSIDERATIONS: AGENCY APPROVALS: The Intel 69030 video controller has 4MB of on-chip memory Power Requirements (Typical Values): • Designed for UL1950, CAN/CSA C22.22 No. 950-95, and supports up to 1280 x 1024 pixel resolutions. Software EN55024: 1998; EN55022: 1998 Class B; Pentium 4: CPU +5V* +12V** +3.3V* drivers are available for most popular operating systems. EN61000-3-2: 2000; EN61000-3-3: 1995 3.06GHz/533MHz 4.05A 6.75A 2.75A 2.8GHz/533MHz 4.05A 4.68A 2.75A ADDITIONAL T4I FEATURES: ORDERING INFORMATION: 2.6GHz/400MHz 3.98A 4.40A 2.75A System Hardware Monitor: 2.4GHz/533MHz 3.96A 3.91A 2.75A Model Name: T4I • The Winbond W83783S chip supports hardware monitoring. 2.0GHz/400MHz 4.00A 3.38A 2.75A Model # CPU Speed ® Pentium 4 The functions monitored are: Celeron: CPU +5V* +12V** +3.3V* 6053-108-xM 3.06GHz -Voltage: +3.3V, +/-12V, +5V and VCORE 2.0GHz/400MHz 4.01A 3.43A 2.75A 6053-107-xM 2.8GHz - Fan speed -12V* @ <100mA 6053-006-xM 2.6GHz -Temperature ® 6053-104-xM 2.4GHz *From Backplane via PICMG Connector • The T4I hardware monitor driver allows the user to program 6053-002-xM 2.0GHz ** From ATX12V power supply or equivalent via P4 connector ® the monitor limits to provide a trigger point for the application Celeron 6053-502-xM 2.0GHz software. The user’s application program can monitor these The processor’s power requirements created the need for an additional trigger points in order to send system alert messages or on-board 4-pin power connector (P4). This connector requires +12V (xM = Memory) perform corrective actions. from an external power supply that conforms to the ATX12V power Intel, Pentium, Celeron and NetBurst are trademarks or registered trademarks of specification. This external power supply should have a minimum Watchdog Timer: Intel Corporation. All other product names are trademarks of their respective owners. wattage rating of at least 250W. The T4I also requires that 3.3V • The programmable watchdog timer provides a system reset be applied to the backplane from the power supply. Copyright ©2003 by TRENTON Technology Inc. All rights reserved. with a total range of 30ms to 60 seconds. The programmable Temperature/Environment: increments of the watchdog are 30ms, 10s and 60s. Operating Temperature: 0° to 45° C. Storage Temperature: - 40° to 70° C. I/O Features: Humidity: 5% to 90% non-condensing •Two high-speed serial ports • Enhanced bi-directional parallel interface The high-performance Pentium 4 processor used on the T4I can • Dual Universal Serial Bus (USB, Rev 2.0) consume as much as 70 Watts of power. The T4I’s cooling system • PS/2 mouse/keyboard interface uses a high-reliability fan mounted to the SBC. • Floppy drive interface Mechanical: Dependable, always. STANDARDS: SBCs with processor options less than 2.8GHz use a low-profile (1.65" height) active cooling system. Overall dimensions for the T4G with these • IEEE P996, Personal Computer Bus Standard processor options, including the active cooling system are 13.3"L (338mm) • PCI Local Bus Specification 2.1 x 4.8"H (121.9mm) x 1.65"W (49.1mm). SBCs with processor speeds • PICMG 1.0 Specification 3.06GHz or greater use a taller active cooling system and have overall • Ultra160 SCSI, SPI-3 Standard dimensions of 13.3"L (338mm) x 4.8"H (121.9mm) x 2.18"W(55.37mm). TRENTON Technology Inc. • 2350 Centennial Drive, Gainesville, Georgia 30504 • Sales: (800) 875-6031 • Phone: (770) 287-3100 • Fax: (770) 287-3150 E-mail: Sales@TrentonTechnology.com • Web: www.TrentonTechnology.com 8416053 06203 1.2