Product data sheet ABE7R16S111 Characteristics sub-base - soldered electromechanical relays ABE7 - 16 channels - relay 5 mm Main Range of product Advantys Telefast ABE7 Product or component Electromechanical output relay sub-base type Number of channels 16 Polarity distribution Polarity distribution contact common per group of 8 channels Contacts type and com- 1 NO (preactuator end) position Complementary Terminal block type Removable [Us] rated supply voltage 24 V DC (PLC end) Number of terminal per channel 1 Fixing mode By clips on 35 mm symmetrical DIN rail By screws on solid plate with fixing kit Width 125 mm Current per output common ≤ 12 A Current per channel 2 A (preactuator end) Minimum switching current 1 mA at >= 5 V Drop-out voltage 2.4 V at 20 °C (PLC end) Switching frequency <= 0.5 Hz <= 10 Hz Threshold tripping voltage 19.2 V at 40 °C Drop-out current 0.5 mA at 20 °C Power dissipation per channel in W ≤ 0.22 W (PLC end) Maximum switching voltage 30 V DC conforming to IEC 60947-5-1 250 V AC 50/60 Hz conforming to IEC 60947-5-1 Number of channel per common 8 Electrical durability 500000 cycles , maximum switching current: 600 mA at 230 V AC-12 (preactua- tor end) 500000 cycles , maximum switching current: 400 mA at 230 V AC-15 (preactua- tor end) 500000 cycles , maximum switching current: 600 mA at 24 V DC-12 (preactuator end) 500000 cycles , maximum switching current: 200 mA at 24 V DC-13 10 ms (pre- actuator end) Electrical reliability 0.00000001 Operating time ≤ 10 ms between coil energisation and NO closing ≤ 6 ms between coil de-energisation and NO opening Contact bounce time ≤ 5 ms 1 NO Operating rate in Hz 0.5 Hz at Ie 10 Hz no load Mechanical durability 20000000 cycles [Uimp] rated impulse withstand voltage 2.5 kV conforming to IEC 60947-1 [Ui] rated insulation voltage 2000 V Installation category II conforming to IEC 60664-1 Tightening torque 0.6 N.m (withflat Ø 3.5 mm screwdriver) Product weight 0.405 kg Apr 1, 2012 1 Downloaded from Elcodis.com electronic components distributor The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Environment Max immunity to microbreaks ≤ 5 ms Dielectric strength 2000 V conforming to IEC 60947-1 Product certifications BV CSA DNV (Det Norske Veritas) GL LROS (Lloyds register of shipping) UL IP degree of protection IP2x conforming to IEC 60529 Protective treatment TC Resistance to incandescent wire 750 °C , extinction time: < 30 s conforming to IEC 60695-2-11 Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Resistance to electrostatic discharge 4 kV (contact) conforming to IEC 61000-4-2 level 3 8 kV (air) conforming to IEC 61000-4-2 level 3 Resistance to radiated fields 10 V/m (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 Resistance to fast transients 2 kV conforming to IEC 61000-4-4 level 3 Ambient air temperature for operation -5...60 °C conforming to IEC 61131-2 Ambient air temperature for storage -40...80 °C conforming to IEC 61131-2 Pollution degree 2 conforming to IEC 60664-1 RoHS EUR conformity date 0841 RoHS EUR status Compliant 2 Downloaded from Elcodis.com electronic components distributor